
4
7. Steam plate: Each steam column has corresponding steam plate, and they can be
combined in a Steam assembly. To clean the steam plate readily, this is designed to be
detachable.
8. Steam egg socket: This particular design for steaming eggs easily, only place the egg on
it vertically. Every steam plate has six steam egg sockets.
9. Rice pan: It can be placed on any steam plate to cook rice. For the sake of reducing
space, the rice pan can be stored in the reservoir when not in use. But it should be
overturned, then position it in place.
10. Steamer lid: It has a convenient knob on top to avoid scalding when it is removed. The
steam lid can match with any steam support.
11. Tube sleeve: Cover around of the heating element which makes the water boil by rapid
rate.
12. Base: Appliance which has the electronic components.
BEFORE THE FIRST USE
Before using the food steamer for the first time , please clean the f ood steamer completely,
put the attachments such as steam column, steam plate, drip tray, steamer lid etc into water
(with dish washing liquid) and clean them thoroughly and rinse. Fill the reservoir with
water to the max mark, assemble all parts and begin to opera te, after working for about 30
minutes, discard the water.
USING FOOD STEAMER
1. Place the food steamer on a stable and level surface away from walls.
2. Fill the reservoir with water according to the need of food. When the water is added to
the minimum mark, it can steam for almost 20 minutes; when to the maximum mark, it
can steam 60 minutes or so. The water level shall not exceed the MAX level on the
water gauge. If the food steamer stops producing steam or steam is reduced obviously
before the food is ready, it indicates you should add water to the reservoir.
NOTE: Don’t add any salt, pepper, flavoring, essence, wine or other liquids in the
reservoir.
3. Install the tube sleeve in the center of inner reservoir making sure the larger diameter
part of the tube sleeve is facing downwards and then install the drip tray on top.
4. The appliance can be used in three ways:
1) Only using lower steam assembly: Put food in lower steam assembly, then position