anko 43295623 User manual

User Manual
RECHARGEABLE FAN/LIGHT WITH REMOTE
Keycode: 43295623
The photos and illustrations shown in this instruction manual are generic.
The manufacturer reserves the right to change any specification or feature
without prior notice.
IMPORTANT: KEEP FOR FUTURE REFERENCE. READ CAREFULLY.

Safety instructions:
Please read all safety instruction warnings carefully before using this product.
Improper use of this product may result in damage to this or attached products.
To ensure the production works well, please never use this in the following conditions:
1. Moist or underwater conditions.
2. Conditions near heater or high temperature service.
3. Conditions with direct and strong sunshine.
4. Do not use chemical solvent on cleaning this product.
5. To avoid being involved by the motor, please keep your hair away from the fan blade
cover
6. KEEP FAN AWAY FROM HAIR AND JEWELLERY
Packaging contents:
Fan x 1
Remote control x 1
USB-C cable x 1
User manual x 1
Specification:
Input：DC5V/2A
Output: DC5V
Led Power：0.5W~2W
Battery capacity: 5200mAh
USB cable length: 100cm

How to Use
Control with no remote：
1. Press button to control the fan speed. Press once for low wind, press twice
for mid wind, press three times for max wind. Press again to turn the fan off.
2. Press button to control the light. Press once for low brightness, press twice
for mid brightness, press three times for max brightness. Press again to turn the
light off.
Control with remote：
1. Use the remote to control the fan and light without pressing the control panel on
the fan.
2. Press ○
8○ 9○ 14 button to set timer
Power display shows the battery power. Charge the battery using the provided
USB cable. The indicator light will flash to show 25% 50% 75% 100% battery until

the fan is fully charged.
Hang the device by the hook if required.
This device could be used as a temporary power bank in case of emergency.
Caution
⚫Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivale-
nt type.
⚫Battery cannot be subjected to high or low extreme temperatures, low air pressure at high alt
itude during use, storage or transportation.
⚫Replacement of abattery with an incorrect type that can result in an explosion or the leakage
of flammable liquid or gas.
⚫Disposal of abattery into fire or ahot oven, or mechanically crushing or cutting of abattery,
that can result in an explosion.
⚫Leaving abattery in an extremely high temperature surrounding environment that can result
in an explosion or the leakage of flammable liquid or gas.
⚫Abattery subjected to extremely low air pressure that may result in an explosion or the leaka
ge of flammable liquid or gas.
Made in China