anko 43-233-625 User manual
Kids Bluetooth Headphones
with LED Light
Operating instructions
12 month warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This
warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange
(where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
warranty. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our
Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995
(New Zealand) or alternatively, via Customer Help at kmart.com.au for
incurred in returning this product can be addressed to our Customer
Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
•
includes:
• Manual
Headset
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
WARNING Do not dispose of unit in fire or water. • Never attempt to disassemble and reassemble. • Waste
electrical products should not be disposed of with household waste, please recycle where facilities exist. • Check
with your local authority for recycle advice. • Keep your device and all accessories out of the reach of children
and animals. • Small parts may cause choking or serious injury if swallowed. • Avoid exposing your device to
very cold or very hot temperatures (below 0˚C or above 45˚C). • Extreme temperatures can cause deforming of
the device and reduce the charging capacity and life of your device. • Do not allow your device to get
wet—liquids can cause serious damage. • Do not handle your device with wet hands.
43-233-625
5)
6)
8)
7)
Charging port
3.5mm audio inputline/Auxiliary
Microphone
TF CARD
Function overview:
How to use this headphone
1. Power on/o
Long press 1) button 2 seconds to turn the unit on
Long press 1) button 2 seconds to turn the unit o.
2. Pairing a Bluetooth device for the first time
1. Turn the unit on.
2. Turn on your external device.
3. Select Bluetooth device name “KM43233625“ in your Bluetooth settings menu to pair.
4. When successfully paired and connected, a beep will issue from the unit.
After initial pairing, the unit will stay paired unless unpaired manually by the user.
If you have used Bluetooth connection before, the system will start searching for the
device last connected. When the device is found, the system will re-connect automatically.
NOTE: Only one Bluetooth device can be connected to the headphone at one time.
When Aux in is connected, Bluetooth function will be switched o，please disconnect the
Aux in cable before using Bluetooth.
NOTE:
Should your device become unpaired or you are not able to connect it, repeat the above
steps.
Charging:
The headphone are powered via an integrated rechargeable battery. The battery cannot
be removed or replaced.
Upon initial use, the battery should be charged fully to ensure optimal performance and
battery life.
Charge the device with the included USB charging cable. Plug the micro-USB end of the
charging cable into the DC charging port (5) and the USB end into a suitable USB port on
your computer or a USB wall charger with DC5V. Charging time approx. 2 hours, when
connected to a standard USB port.
AUX- in mode
No need to turn on the headphone, Connect with mobile phone, computer or other audio
equipment with 3.5mm AUX cable. Then it works.
TF card Mode
Turn on the headphone, insert the MicroSD card into the slot, music will play automatically
when there is audio files stored.
Short press to play/pause
Short press +/- to control previous/next song
Long press +/- to control volume
Supported file format: MP3/WAV/WMA
Notes: Press Mbutton to switch the mode, when you hear a beep notify means switch to
next mode. Total have 2 dierent mode: TF card mode – Bluetooth mode
Hands free
Press 2) button to answer or hang up a phone call
Press 2) button twice to redial the last number
Specifications:
DRIVER:
40MM
IMPEDANCE:
32 Ohm
SENSITIVITY:
81dB ±3dB AT 1kHz
FREQUENCY RESPONSE:
20Hz - 20kHz
CABLE:
3.5MM ROUND AUX CABLE
Plug Type:
MICRO CHARGING CABLE+3.5mm AUX CABLE
1) Power/Mode button. Long press
to turn on/o the unit.
2) Short press to play or pause music.
3) Short press previous song/ long press volume -
4) Short press next song/ long press volume+
Other anko Headphones manuals
