anko 43243297 User manual

Bluetooth®
headphone
Operating instructions
43243297/43243884
includes:
•Bluetooth headphone
•Charging cable
•use manual
Statement
•High or low extreme temperatures that a battery cannot be subjected to during use, storage or transportation and low air pressure at high altitude.
•Replacement of battery with an incorrect type that can defeat a safeguard
•Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
•Leaving battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid of or gas
•A battery subjected to in an extremely low air pressure that can result in an explosion or the leakage of flammable liquid of or gas
•CAUTION: Risk of explosion if the battery is replaced by an incorrect type
This Bluetooth earbuds shall be charged by the supplied charging unit only.
WARNING Do not dispose of unit in fire or water. • Never attempt to disassemble and reassemble. • Waste
electrical products should not be disposed of with household waste, please recycle where facilities exist. • Check
with your local authority for recycle advice. • Keep your device and all accessories out of the reach of children
and animals. • Small parts may cause choking or serious injury if swallowed. • Avoid exposing your device to
very cold or very hot temperatures (below 0˚C or above 30˚C). • Extreme temperatures can cause deforming of
the device and reduce the charging capacity and life of your device. • Do not allow your device to get
wet—liquids can cause serious damage. • Do not handle your device with wet hands.

Pairing the earphone with
Bluetooth devices
• Once the earphone is powered on,
it is in pairing mode (LED flashes red
and blue ) and will pair to the last
paired device (if available).
• Pair the earphone in Bluetooth menu in
mobile phone and once it is paired, you
can hear a pairing tone and the led will
turn blue.
Bluetooth Name:
KM43243297/KM43243884
Phone calls
• Press button to pick up/hang up
phone calls.
• Press and hold the 1s reject the calls
Playing music
When the earphone connects with the
mobile phone via Bluetooth you can
enjoy music through the earphone
earphone wirelessly.
Battery Charging
This Bluetooth earphone is powered by
rechargeable Li-ion battery.
Please use the accessory USB cable
to recharge the battery.
•Insert USB charging cable into a
suitable USB port.
•Connect charging cable with the
headset USB port .
•Indicator LED turns RED to show
battery is charging.
•Indicator LED turns o when
battery is fully charged.
•It takes about 2.5 hours to fully
charge the battery.
TF Mode
Model No:
43243297/43243884
Version:
V5.0
Support profiles:
A 2 D P, AV R C P, H F P
Working Distance:
10 meters
Music Time:
>5 Hours
Talk time:
>5 Hours
Standby time:
>100 Hours
Charging voltage:
5V d.c.
Charge time:
2.5 Hours
Pairing window time:
5 minutes
Function overview:
Function Operation
Pause click button
Play click button
Next Song press and hold button
Previous Song press and hold button
Volume Up click button – when the
volume is adjusted to maximum you will
hear a tone notification
Volume Down click button
Power ON / OFF
Power ON
Press and hold power button 3s.You will
hear a voice indication tone
Power OFF
Press and hold power button 3s.You will
hear a voice indication tone
Headphone mode switch
Click the M button to switch Bluetooth
mode/TF card mode(if the TF card insert)
How to use these headphone:
Specifications:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc.,
and any use of such marks by KMART AUSTRALIA is under licence.
-
-
+
+
M
+
-
Line in
Vol-/
/Pre
Pause/Play/
Answer/Hang up
Vol+/
Next track
Power on
TF card mode
TF
card slot
LED indicator
USB Charging port
Insert the TF card, click the M button
change the mode, until you heard the
voice notification. And then you can
enjoy the TF music. Support WAV, WMA,
Mp3 ect file.
- This product shall not be connected to power supply source exceeding PS1 (5V d.c. 1A).
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude
during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of
flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that
can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas.
- The apparatus is only suitable for mounting at height < 2m.
Statement