SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
1. For hygienic reasons, do not share this appliance with other people.
2. This appliance contains batteries that are non-replaceable.
3. When switched ON, the appliance must never come-in contact with the hair on
your head, eyelashes, ribbons, etc. to prevent any danger or injury as well as to
prevent blockage or damage to the appliance.
4. Only use the appliance as described in this manual.
5. Do not immerse the appliance in water or any other liquid.
6. Always check the appliance for damage prior to use. If any damage is observed,
do not use the appliance.
7. The appliance is intended for indoor use only.
8. Always switch the appliance OFF after use.
9. This appliance has no user serviceable parts. Do not attempt to access the internal
components in the appliance.
10. This appliance is for personal use only, not designed for commercial use.
11. Do not use it outdoors.
12. Do not use the appliance if it is not working properly, if it has been dropped or if it
has been immersed in any liquid.
13. Before using the appliance, ensure that the roller head is securely fitted.
14. Keep the appliance out of reach of young children and pets.
15. Do not use it on children or allow children to play with the appliance.
16. The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instructions concerning use of the
appliance by a person responsible for their safety.
17. Children must be supervised to ensure that they do not play with the appliance.
18. For electrical safety, when using an external USB charger, do not operate the
charger with a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged or dropped into water.
19. IMPORTANT! Use only the original USB cable supplied with the product.
20. Check that your supply voltage is the same as that stated on the USB charger.
21. When charging the appliance, the power switch must be set to OFF.