Anritsu MS2830A User manual

Conguration Guide
MS2830A
Signal Analyzer
Conguration Guide

2 Configuration Guide lMS2830A
This explains how to order the new MS2830A and MS2830A retrofit options and measurement software.
Follow the steps below to select the MS2830A configuration.
Functions marked “standard” are built-in. Options and measurement software can be added as necessary.
Steps for New Purchase
Step 1. Select maximum frequency range (Required option; Frequency range not upgradeable.)
Outline Option No. Additional information
Frequency range: 9 kHz to 3.6 GHz MS2830A-040 Spectrum Analyzer
Frequency range: 9 kHz to 6 GHz MS2830A-041 Spectrum Analyzer
Frequency range: 9 kHz to 13.5 GHz MS2830A-043 Spectrum Analyzer
Frequency range: 9 kHz to 26.5 GHz MS2830A-044 Spectrum Analyzer
Frequency range: 9 kHz to 43 GHz MS2830A-045 Spectrum Analyzer
Step 2. Choose frequency reference
Outline Option No. Additional information
Frequency reference Standard Aging rate: ±1 × 10–6/year, ±1 × 10–7/day
Rubidium Reference Oscillator MS2830A-001 Aging rate: ±1 × 10–10/month
Start-up characteristics: ±1 × 10–9 (7 minutes after power-on)
High Stability Reference Oscillator MS2830A-002 Aging rate: ±1 × 10–7/year, ±1 × 10–8/day
Start-up characteristics: ±5 × 10–8 (5 minutes after power-on)
*: Dedicated option for MS2830A-040/041/043
Step 3. Choose analysis bandwidth
Outline Option No. Additional information
Analysis Bandwidth N/A Standard Spectrum Analyzer
Analysis Bandwidth 10 MHz MS2830A-006 10 MHz analysis bandwidth supports VSA and digitize functions.
Supports measurement software for communications with bandwidth of ≤10 MHz.
Analysis Bandwidth Extension to
31.25 MHz
MS2830A-005 Extends analysis bandwidth from 10 MHz to 31.25 MHz.
Supports measurement software for wideband communications, such as LTE and WiMAX.
*: Requires MS2830A-006. Not supported by MS2830A-045
Bandwidth Extension to 31.25 MHz for
Millimeter-wave
MS2830A-009 This option extends the MS2830A-045 (43 GHz Signal Analyzer) maximum analysis bandwidth
to 31.25 MHz.
*: Requires MS2830A-006.
Dedicated option for MS2830A-045 (43 GHz Signal Analyzer).
Cannot be set the RBW to more than 10 MHz in spectrum analyzer function.
Analysis Bandwidth Extension to
62.5 MHz
MS2830A-077 Extends analysis bandwidth from 10 MHz to 62.5 MHz.
*: Retrot not supported.
Requires MS2830A-006 and MS2830A-005 (for MS2830A-040/041/043/044).
Requires MS2830A-006 and MS2830A-009 (for MS2830A-045).
An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis
bandwidth (62.5 MHz max.).
The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement
purposes.
Analysis Bandwidth Extension to
125 MHz
MS2830A-078 Extends analysis bandwidth from 10 MHz to 125 MHz.
*: Retrot not supported.
Requires MS2830A-006, MS2830A-005 and MS2830A-077 (for MS2830A-040/041/043/044).
Requires MS2830A-006, MS2830A-009 and MS2830A-077 (for MS2830A-045).
An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis
bandwidth (125 MHz max.).
The MS2690A/91A/92A Signal Analyzer series is recommended for other measurement
purposes.
Step 4. Add preamplier (option)
Outline Option No. Additional information
Preamplier: 100 kHz to 6 GHz MS2830A-008 Improves level sensitivity from 100 kHz to 6 GHz. Supports all frequency options.
3.6 GHz upper frequency limit with MS2830A-040.
*: Cannot be installed simultaneously with MS2830A-068.
Microwave Preamplier MS2830A-068 Improves level sensitivity. This option is used to measure low-level signals, such as noise and
interference signals.
Frequency Range: 100 kHz to 26.5 GHz (with MS2830A-044)
100 kHz to 43 GHz (with MS2830A-045)
*: Dedicated option for MS2830A-044/045. Cannot be installed simultaneously with MS2830A-008.
MS2830A Signal Analyzer

Configuration Guide l MS2830A 3
Step 5. Add microwave preselector bypass (option)
Outline Option No. Additional information
Microwave Preselector Bypass MS2830A-067 Bypassing the preselector used for the microwave band improves RF frequency characteristics
and in-band frequency characteristics. Supports signal analyzer measurement functions up to
main-frame upper limit frequency.
*: Dedicated option for MS2830A-044/045.
Add MS2830A-067 when using the signal analyzer measurement functions at bandwidth:
>31.25 MHz and frequency: >6 GHz.
Step 6. Choose phase noise performance
Outline Option No. Additional information
Low Phase Noise Performance MS2830A-066 Phase noise performance is increasingly important at carrier offsets of 1 kHz to 100 kHz.
Spectrum analyzer phase noise performance affects ACLR/MASK measurements at narrowband
communications. (Channel bandwidth: <100 kHz)
Add MS2830A-066 when required by the specications.
*: Retrot not supported. Dedicated option for MS2830A-040/041/043.
Cannot be installed simultaneously with MS2830A-043, MS2830A-066 and MS2830A-020/021/088.
Step 7. Add measurement software (Requires MS2830A-006. Requires MS2830A-005/009/077/078 depending on software.)
Outline Option No. Additional information
Mobile WiMAX Measurement Software MX269010A Supports Mobile WiMAX modulation analysis and atness measurements.
W-CDMA/HSPA Downlink
Measurement Software
MX269011A Supports W-CDMA/HSPA/HSPA Evolution compliant BS, and measurement of device RF Tx
characteristics.
W-CDMA/HSPA Uplink
Measurement Software
MX269012A Supports W-CDMA/HSPA/HSPA Evolution compliant UE and measurement of device RF Tx
characteristics.
GSM/EDGE Measurement Software MX269013A
Supports GSM/EDGE (EGPRS) compliant BS, and measurement of UE and device RF Tx characteristics.
EDGE Evolution Measurement Software MX269013A-001 Supports EDGE Evolution (EGPRS2) compliant BS, and measurement of UE and device RF Tx characteristics.
*: Requires MX269013A
TD-SCDMA Measurement Software MX269015A
Supports TD-SCDMA compliant repeaters, BS, and measurement of UE and device RF Tx characteristics.
Vector Modulation Analysis Software MX269017A Supports evaluation of RF Tx characteristics of digital radio equipment and components for wide
range of applications ranging from public facilities and private industry to aerospace and satellite.
Analog Measurement Software MX269018A*Supports evaluation of analog signal Tx characteristics, Rx characteristics and Sound check.
(Requires Analog Signal Generator, Audio Analyzer, and speaker, etc.)
*: Requires MS2830-066 and A0086A. Not require MS2830A-006.
LTE Downlink Measurement Software MX269020A Supports evaluation of 3GPP LTE FDD downlink signal Tx characteristics.
LTE-Advanced FDD Downlink
Measurement Software
MX269020A-001 Supports evaluation of 3GPP LTE-Advanced FDD downlink signal Tx characteristics.
*: Requires MX269020A
LTE Uplink Measurement Software MX269021A Supports evaluation of 3GPP LTE FDD uplink signal Tx characteristics.
LTE TDD Downlink Measurement Software MX269022A Supports evaluation of 3GPP LTE TDD downlink signal Tx characteristics.
LTE-Advanced TDD Downlink
Measurement Software
MX269022A-001 Supports evaluation of 3GPP LTE-Advanced TDD downlink signal Tx characteristics.
*: Requires MX269022A
LTE TDD Uplink Measurement Software MX269023A Supports evaluation of 3GPP LTE TDD uplink signal Tx characteristics.
CDMA2000 Forward Link
Measurement Software
MX269024A Supports evaluation of CDMA2000 (RC1 to 5) forward link Tx characteristics.
All Measure Function MX269024A-001 The CDMA2000 Forward Link Tx test items, such as modulation accuracy, power, spectrum,
etc., are batch-measured at high speed.
*: Requires MX269024A
EV-DO Forward Link
Measurement Software
MX269026A Supports evaluation of EV-DO (Rev. 0, Rev. A) forward link Tx characteristics.
All Measure Function MX269026A-001 The EV-DO Forward Link Tx test items, such as modulation accuracy, power, spectrum, etc.,
are batch-measured at high speed.
*: Requires MX269026A
WLAN (802.11) Measurement Software MX269028A Supports IEEE802.11n/a/b/g/p/j modulation analysis and atness measurements.
802.11ac (80 MHz)
Measurement Software
MX269028A-001 Supports IEEE802.11ac modulation analysis and atness measurements.
*: Requires MX269028A
W-CDMA BS Measurement Software MX269030A Supports evaluation of W-CDMA/HSPA downlink signal Tx characteristics (Numerical value result)
For manufacturing needing time shortening.
Wireless Network Device Test Software MX283027A Choose MX283027A-001 or MX283027A-002.
This software is specialized in the speedup of the production line. There is not screen display for
result of a measurement. As for the result, only numerical value is retrieved with remote.
Because batch handled the measurement, speedup was realized.
WLAN Test Software
MX283027A-001
*
1
Supports IEEE802.11n/a/b/g modulation analysis and ACLR measurements.
*: Requires MX283027A
Bluetooth Test Software MX283027A-002 Supports Bluetooth signal Tx/Rx characteristics.
(Basic Rate/Enhanced Data Rate/Bluetooth Low Energy)
*: Requires MX283027A
TRX Sweep Calibration MX283087A
The TRx power of base stations, mobile terminals and device components can be adjusted quickly.
*1: MX283027A-001 includes MX269911A WLAN IQproducer (Cannot order MX283027A-001 and MX269911A at same time).

4 Configuration Guide lMS2830A
Required Options (Analysis Bandwidth)
Name Model/Order No.
Analysis Bandwidth Extension Option
(: Required, +: Function expansion,
Space (no symbol): No specication)
Opt. 006 Opt. 005/009 Opt. 077 Opt. 078
Mobile WiMAX Measurement Software MX269010A  
W-CDMA/HSPA Downlink Measurement Software MX269011A 
W-CDMA/HSPA Uplink Measurement Software MX269012A 
GSM/EDGE Measurement Software MX269013A 
EDGE Evolution Measurement Software MX269013A-001 
TD-SCDMA Measurement Software MX269015A 
Vector Modulation Analysis Software MX269017A *1+*1+*1+*1
Analog Measurement Software MX269018A
LTE Downlink Measurement Software MX269020A  
LTE-Advanced FDD Downlink Measurement Software MX269020A-001*2 *2+*2+*2
LTE Uplink Measurement Software MX269021A  
LTE TDD Downlink Measurement Software MX269022A  
LTE-Advanced TDD Downlink Measurement Software MX269022A-001*2 *2+*2+*2
LTE TDD Uplink Measurement Software MX269023A  
CDMA2000 Forward Link Measurement Software MX269024A 
All Measure Function MX269024A-001 
EV-DO Forward Link Measurement Software MX269026A 
All Measure Function MX269026A-001 
WLAN (802.11) Measurement Software MX269028A  
802.11ac (80 MHz) Measurement Software MX269028A-001*3 *3*3*3
W-CDMA BS Measurement Software MX269030A 
Wireless Network Device Test Software MX283027A
WLAN Test Software MX283027A-001  
Bluetooth Test Software MX283027A-002 
TRX Sweep Calibration MX283087A  
*1: MX269017A Symbol Rate setting range varies as below depending on option configuration.
O-QPSK FSK Except FSK
Frame Formatted Non-Formatted
Opt. 078, Opt. 077, Opt. 005/009, Opt. 006 installed 0.1 ksps to 12.5 Msps 0.1 ksps to 25 Msps 0.1 ksps to 50 Msps 0.1 ksps to 140 Msps
Opt. 077, Opt. 005/009, Opt. 006 installed 0.1 ksps to 6.25 Msps 0.1 ksps to 12.5 Msps 0.1 ksps to 25 Msps 0.1 ksps to 70 Msps
Opt. 005/009, Opt. 006 installed 0.1 ksps to 3.125 Msps 0.1 ksps to 6.25 Msps 0.1 ksps to 12.5 Msps 0.1 ksps to 35 Msps
Opt. 006 installed 0.1 ksps to 1.25 Msps 0.1 ksps to 2.5 Msps 0.1 ksps to 5 Msps 0.1 ksps to 5 Msps
*2: The LTE-Advanced Carrier Aggregation measurement range varies as follows, depending on the Analysis Bandwidth Extension option configuration.
The MS2690A/91A/92A Signal Analyzer series is recommended for many purposes.
Main frame
Analysis Bandwidth Extension
Option Conguration
Maximum Analysis Bandwidth
(In-band carrier aggregation range) Maximum Number of Bands Maximum Number of
Component Carriers
MS269xA
Opt. 078 installed 125 MHz 35
Opt. 077 installed 31.25 MHz 35
Standard 31.25 MHz 35
MS2830A Opt. 078 installed 125 MHz 1 5
Opt. 077 installed 31.25 MHz 35
Opt. 005/009 installed 31.25 MHz 35
*3: The IEEE802.11ac measurement range varies as follows, depending on the Analysis Bandwidth Extension option configuration.
The MS2690A/91A/92A Signal Analyzer series is recommended for many purposes.
Model Bandwidth of IEEE802.11ac signal
Main frame Measurement software
Analysis Bandwidth Extension
Option Conguration 20 MHz 40 MHz 80 MHz 160 MHz 80 MHz + 80 MHz
MS269xA MX269028A-002
(Only for MS269xA)
Opt. 078 installed     *3-1
Opt. 077 installed  
Standard  
MS2830A MX269028A-001
(Only for MS2830A)
Opt. 078 installed   *3-2
Opt. 077 installed  
Opt. 005/009 installed  
*3-1: Measurement required for each carrier signal (80-MHz bandwidth)
*3-2: Measurement is only possible when the carrier signal (80-MHz bandwidth) is input due to the effect of the image response.

Configuration Guide l MS2830A 5
Step 8. Add other measurement software (These software are for PC. )
Outline Option No. Additional information
Wi-SUN PHY Measurement Software MX705010A Supports automatic measurement of smart utility network wireless communications “Wi-SUN”
PHY conformance test cases.
*: MS2830A option conguration examples:
MS2830A-041, MS2830A-002, MS2830A-006, MX269017A,
MS2830A-020, MS2830A-022, MS2830A-027, MX269902A.
Cannot be installed in MS2830A.
Wi-SUN Protocol Monitor MX705110A Supports Wi-SUN protocol analysis. The wireless signals between communicating wireless
equipments are captured as I/Q data using the MS2830A digitize function and data analysis is
performed by the MX705110A. Data analysis displays the PHY/MAC frame format, Tx timing,
etc.
*: Requires MS2830A-006.
Cannot be installed in MS2830A.
Step 9. Add other signal analyzer options
Outline Option No. Additional information
Phase Noise Measurement MS2830A-010 Adds frequency offset range 10 Hz to 10 MHz phase noise measurement.
Secondary HDD MS2830A-011 Removable HDD for user data.
Precompliance EMI Function MS2830A-016 This option adds an EMI measurement detection mode and RBW to the spectrum analyzer
function. Both the detection mode used for CISPR standards (Quasi-Peak, CISPR-AVG,
RMS-AVG) and RBW (200 Hz (6 dB), 9 kHz (6 dB), 120 kHz (6 dB), 1 MHz (Imp)) as well as
conventional settings can be selected.
Noise Figure Measurement Function MS2830A-017 Adds Noise Figure Measurement function.
Noise Figure is measured with the measurement method of Y-factor method which uses a
Noise Source*.
*: Noisecom, NC346 series
BER Measurement Function MS2830A-026 Adds BER Measurement Function for input bit rates of 100 bps to 10 Mbps.
It supports Rx sensitivity tests by inputting the receiver-demodulated Data/Clock/Enable to the
back of the MS2830A.
*: The J1556A Aux Conversion Adapter is a standard accessory supplied with MS2830A-026.
Step 10. Add built-in vector signal generator
Outline Option No. Additional information
3.6 GHz Vector Signal Generator MS2830A-020 Covers 250 kHz to 3.6 GHz frequency range and adds waveform generator with 120 MHz wide
vector modulation bandwidth.
6 GHz Vector Signal Generator MS2830A-021 Covers 250 kHz to 6 GHz frequency range and adds waveform generator with 120 MHz wide
vector modulation bandwidth.
Step 10-1. Add options for vector signal generator (Requires MS2830A-020 or MS2830A-021)
Outline Option No. Additional information
Vector Signal Generator Low-power
Extension
MS2830A-022 Expands lower limit of output level from –40 to –136 dBm.
(Note: 5-dB drop in upper output level.)
Vector Signal Generator ARB Memory
Extension 256 Msample
MS2830A-027 Expands ARB memory capacity from 64 to 256 Msamples.
AWGN MS2830A-028 Adds AWGN generator function.
Analog Function Extension for Vector
Signal Generator
MS2830A-029 Adds analog signal generation function using MX269018A Analog Measurement Software to
Vector Signal Generator option (MS2830A-020/021). Can calibrate lower limit frequency up to
100 kHz (MS2830A-020/021 lower limit frequency is 250 kHz).
*: Please contact our sales representative when requesting retrotting.
Requires MX269018A, MS2830A-020 or 021, and MS2830A-022

6 Configuration Guide lMS2830A
Step 10-2. Add vector waveform generation tool (IQproducer) license (Requires MS2830A-020 or MS2830A-021)
Outline Option No. Additional information
HSDPA/HSUPA IQproducer MX269901A Outputs waveform pattern created by setting HSDPA/HSUPA Uplink/Downlink parameter with
HSDPA/HSUPA IQproducer from vector signal generator option.
TDMA IQproducer MX269902A Outputs waveform pattern created by setting TDMA parameter with TDMA IQproducer from
vector signal generator option.
Multi-carrier IQproducer MX269904A Outputs multi-carrier waveform pattern of tone signal and various communication method
modulated signals from vector signal generator option.
Mobile WiMAX IQproducer MX269905A Outputs waveform pattern created by setting Mobile WiMAX parameter with Mobile WiMAX
IQproducer from vector signal generator option.
LTE IQproducer MX269908A Outputs waveform pattern created by setting LTE FDD parameter with LTE IQproducer from
vector signal generator option.
LTE-Advanced FDD Option MX269908A-001 Outputs waveform pattern created by setting LTE-Advanced FDD parameter with LTE
IQproducer from vector signal generator option.
*: Requires MX269908A.
LTE TDD IQproducer MX269910A Outputs waveform pattern created by setting LTE TDD parameter with LTE TDD IQproducer
from vector signal generator option.
LTE-Advanced TDD Option MX269910A-001 Outputs waveform pattern created by setting LTE-Advanced TDD parameter with LTE TDD
IQproducer from vector signal generator option.
*: Requires MX269910A.
WLAN IQproducer MX269911A Outputs waveform pattern created by setting IEEE802.11n/a/b/g/p/j parameter with WLAN
IQproducer from vector signal generator option.
802.11ac (80 MHz) Option MX269911A-001 Outputs waveform pattern created by setting IEEE802.11ac parameter with WLAN IQproducer
from vector signal generator option.
*: Requires MX269911A.
TD-SCDMA IQproducer MX269912A Outputs waveform pattern created by setting TD-SCDMA parameter with TD-SCDMA
IQproducer from vector signal generator option.
1xEV-DO Reverse Receiver Test
Waveform Pattern
MX269970A
Reverse Link signal waveform patterns for 1xEV-DO base station Rx measurements and this license
Step 11. Add built-in analog signal generator (Require MX269018A)
Outline Option No. Additional information
3.6 GHz Analog Signal Generator MS2830A-088 Outputs analog signals by combining with MX269018A Analog Measurement Software and
includes low power expansion (equivalent to MS2830A-022).
Can calibrate lower limit frequency up to 100 kHz (MS2830A-020 lower limit frequency is 250 kHz).
*: Requires MX269018A. Cannot be installed simultaneously with MS2830A-022.
Vector modulation signal output not supported (added VSG by MS2830A-189).
Step 11-1. Add options for analog signal generator (Require MS2830A-088)
Outline Option No. Additional information
Vector Function Extension for Analog
Signal Generator Retrot
MS2830A-189 Installs license required for vector signal generation in existing Analog Signal Generator
(MS2830A-088/188).
Use following options when ordering new Analog Signal Generator + Vector Signal Generator:
MS2830A-020 or 021 + MS2830A-022 + MS2830A-029 + MX269018A + MS2830A-066
Step 12. Add built-in audio analyzer (Require MX269018A)
Outline Option No. Additional information
Audio Analyzer MS2830A-018 Combination with the MX269018A Analog Measurement software supports audio I/O.
Combination with the built-in Analog Signal Generator supports measurement of analog radio
TRx characteristics.
*: Requires MX269018A.
Step 13. Add accessories
Outline Option No. Additional information
AUX Conversion Adaptor J1556A Adapter for converting from AUX to BNC.
Used for MARKER output from vector signal generator option, pulse modulation signals,
baseband reference clock signals and Clock, Data and Enable signals for BER Measurement
Function option.
*: The J1556A Aux Conversion Adapter is a standard accessory supplied with the Opt. 026
BER Measurement Function
USB Power Sensor (50 MHz to 6 GHz,
with USB A to Mini-B Cable)
MA24106A Supports 50 MHz to 6 GHz and operates on Windows.
Microwave USB Power Sensor (10 MHz
to 8 GHz, with USB A to Micro-B Cable)
MA24108A Supports 10 MHz to 8 GHz and operates on Windows.
Microwave USB Power Sensor (10 MHz
to 18 GHz, with USB A to Micro-B Cable)
MA24118A Supports 10 MHz to 18 GHz and operates on Windows.
Microwave USB Power Sensor (10 MHz
to 26 GHz, with USB A to Micro-B Cable)
MA24126A Supports 10 MHz to 26 GHz and operates on Windows.

Configuration Guide l MS2830A 7
Hardware Option Retrofit
The following hardware options can be retrofitted. Order the Z1345A Installation Kit as well.
The MS2830A must be returned to the Anritsu plant for hardware retrofitting.
Model/Order No. Name Reference steps
Hardware options
MS2830A-101 Rubidium Reference Oscillator Retrot 2
MS2830A-102 High Stability Reference Oscillator Retrot 2
MS2830A-105 Analysis Bandwidth Extension to 31.25 MHz Retrot 3
MS2830A-106 Analysis Bandwidth 10 MHz Retrot 3
MS2830A-108 Preamplier Retrot 4
MS2830A-109
Bandwidth Extension to 31.25 MHz for Milimeter-wave Retrot (Dedicated for MS2830A-045) 3
MS2830A-110 Phase Noise Measurement Function Retrot 9
MS2830A-111 2ndary HDD Retrot 9
MS2830A-116 Precompliance EMI Function Retrot 9
MS2830A-117 Noise Figure Measurement Function Retrot 9
MS2830A-118 Audio Analyzer Retrot 12
MS2830A-126 BER Measurement Function Retrot 9
MS2830A-167 Microwave Preselector Bypass Retrot 5
MS2830A-168 Microwave Preamplier Retrot 4
MS2830A-120 3.6 GHz Vector Signal Generator Retrot 10
MS2830A-121 6 GHz Vector Signal Generator Retrot 10
MS2830A-122 Low Power Extension for Vector Signal Generator Retrot 10-1
MS2830A-127 ARB Memory Upgrade 256 Msa for Vector Signal Generator Retrot 10-1
MS2830A-128 AWGN Retrot 10-1
MS2830A-188 3.6 GHz Analog Signal Generator Retrot 11
MS2830A-189 Vector Function Extension for Analog Signal Generator Retrot 11-1
Application parts Z1345A Installation Kit (Required when retrotting options or installing software) –
Retrot to Current MS2830A

8 Configuration Guide lMS2830A
Software Option Retrofit
The following software options can be retrofitted. Order the Z1345A Installation Kit as well.
The MS2830A does not require return to the Anritsu plant for software retrofitting.
Model/Order No. Name Reference steps
Measurement software
MX269010A Mobile WiMAX Measurement Software
7
MX269011A W-CDMA/HSPA Downlink Measurement Software
MX269012A W-CDMA/HSPA Uplink Measurement Software
MX269013A GSM/EDGE Measurement Software
MX269013A-001 EDGE Evolution Measurement Software (Requires MX269013A)
MX269015A TD-SCDMA Measurement Software
MX269017A Vector Modulation Analysis Software
MX269018A*1Analog Measurement Software
MX269020A LTE Downlink Measurement Software
MX269020A-001 LTE-Advanced FDD Downlink Measurement Software (Requires MX269020A)
MX269021A LTE Uplink Measurement Software
MX269022A LTE TDD Downlink Measurement Software
MX269022A-001 LTE-Advanced TDD Downlink Measurement Software (Requires MX269022A)
MX269023A LTE TDD Uplink Measurement Software
MX269024A CDMA2000 Forward Link Measurement Software
MX269024A-001 All Measure Function (Requires MX269024A)
MX269026A EV-DO Forward Link Measurement Software
MX269026A-001 All Measure Function (Requires MX269026A)
MX269028A WLAN (802.11) Measurement Software
MX269028A-001 802.11ac (80 MHz) Measurement Software (Requires MX269028A)
MX269030A W-CDMA BS Measurement Software
MX283027A Wireless Network Device Test Software
MX283027A-001*2WLAN Test Software (Requires MX283027A)
MX283027A-002 Bluetooth Test Software (Requires MX283027A)
MX283087A TRX Sweep Calibration
Waveform generation
tools (IQproducer)/
Waveform patterns
MX269901A HSDPA/HSUPA IQproducer
10-2
MX269902A TDMA IQproducer
MX269904A Multi-Carrier IQproducer
MX269905A Mobile WiMAX IQproducer
MX269908A LTE IQproducer
MX269908A-001 LTE-Advanced FDD Option (Requires MX269908A)
MX269910A LTE TDD IQproducer
MX269910A-001 LTE-Advanced TDD Option (Requires MX269910A)
MX269911A*2WLAN IQproducer
MX269911A-001 802.11ac (80 MHz) Option (Requires MX269911A)
MX269912A TD-SCDMA IQproducer
MX269970A 1xEV-DO Reverse Receiver Test Waveform Pattern
Other measurement
software (These
software are for PC. )
MX705010A Wi-SUN PHY Measurement Software
8
MX705110A Wi-SUN Protocol Monitor
Application parts Z1345A Installation Kit (Required when retrotting options or installing software) –
*1: Can be retrofitted to MS2830A with installed MS2830A-062 or MS2830A-066 option but requires separate A0086A USB Audio.
*2: MX283027A-001 includes MX269911A WLAN IQproducer (Cannot order MX283027A-001 and MX269911A at same time).
Software Update
Software is updated regularly to add new functions, improve performance and fix bugs.
Download the latest software from the following URL. Register before use.
Software Download Site URL
https://www1.anritsu.co.jp/Download/MService/Login.asp

Configuration Guide l MS2830A 9
Options Conguration Guide
Options Configuration
Refer two table shown below about the hardware / software which each frequency model of MS2830A can implement.
Hardware
Frequency range (MS2830A-040/041/043/044/045) not upgradable.
 = Can be installed, No = Cannot be installed, R = Require, U = Upgrade
Opt. Name
Retrot
Addition to Main frame Combination with "Opt." (Refer to the left line)
040 041 043 044 045 001 002 005 006 009 077 078 008 010 011 016 017 018 020 021 022 026 027 028 029 066 067 068 088 189
001 Rubidium Reference Oscillator 
002 High Stability Reference Oscillator No No
005 Analysis Bandwidth Extension to 31.25 MHz No RNo
006 Analysis Bandwidth 10 MHz  U U U U
009 Bandwidth Extension to 31.25 MHz for Millimeter-wave No No No No No No RNo No No No No No No No No No
077 Analysis Bandwidth Extension to 62.5 MHz No  *5R*5
078 Analysis Bandwidth Extension to 125 MHz No  *5R*5R
008 Preamplier *1*1*1
010 Phase Noise Measurement Function 
011 2ndary HDD 
016 Precompliance EMI Function 
017 Noise Figure Measurement Function  U U
018 Audio Analyzer*4  *7No No No RNo No
020 3.6 GHz Vector Signal Generator   *2No No No No *2No No No No
021 6 GHz Vector Signal Generator   *2No No No No *2No No No No
022 Low Power Extension for Vector Signal Generator No No No RNo No No No
026 BER Measurement Function 
027
ARB Memory Upgrade 256 MSa for Vector Signal Generator
No No No RNo No *3*3
028 AWGN No No No RNo No *3*3
029 Analog Function Extension for Vector Signal Generator*4*8  No No No No R R R No No No No
066 Low Phase Noise Performance No   *2No No No *2No No
067 Microwave Preselector Bypass No No No   No No No No No No No No No No No
068 Microwave Preamplier No No No *1*1No *1No No No No No No No No No No
088 3.6 GHz Analog Signal Generator*4  No No No No No No No *3*3No RNo No U
189
Vector Function Extension for Analog Signal Generator Retrot
  No No No No No No No *3*3No RNo No R
*1: Cannot be installed simultaneously MS2830A-008 and MS2830A-068/168. When MS2830A-168 is added to Signal Analyzer with MS2830A-008, only
MS2830A-168 becomes effective.
*2: MS2830A-043 can implement only either MS2830A-020/021 or MS2830A-066.
*3: MS2830A-027 and MS2830A-028 are not used in analog signal generator (MS2830A-088/188).
After vector function (MS2830A-189) was added, the vector signal generator function can add MS2830A-027 and MS2830A-028.
*4: Require MX269018A.
*5: MS2830A-040/041/043/044 require MS2830A-005.
MS2830A-045 requires MS2830A-009.
*6: An image response is received when setting the bandwidth to more than 31.25 MHz.
This can be used when not inputting a signal frequency outside the MS2830A analysis bandwidth (125 MHz max.).
The MS2690A/91A/92A series Signal Analyzer is recommended for other measurement purposes.
*7: The MS2830A-018 can be installed with MS2830A-043 but cannot be installed simultaneously with a signal generator (MS2830A-088/020/021/029) because
MS2830A-066 is required. Consequently, analog wireless Rx tests cannot be performed using the same main frame when the MS2830A-018 and
MS2830A-043 are combined.
*8: Please contact our sales representative when requesting retrofitting.

10 Configuration Guide lMS2830A
Software
 = Can be installed, No = Cannot be installed, R = Require, U = Upgrade
Model Name
Addition to Main frame Analysis
Bandwidth Note
040 041 043 044 045 005 006 009 077 078
MX269010A Mobile WiMAX Measurement Software No R R No
MX269011A W-CDMA/HSPA Downlink Measurement Software  R
MX269012A W-CDMA/HSPA Uplink Measurement Software  R
MX269013A GSM/EDGE Measurement Software  R
MX269013A-001 EDGE Evolution Measurement Software  RRequire MX269013A
MX269015A TD-SCDMA Measurement Software  R
MX269017A Vector Modulation Analysis Software *3*3UR*1U U U: Upgrade of the phase noise performance (MS2830A-066)
(Measured signal: Frequency <3.6 GHz, Bandwidth <1 MHz)
MX269018A Analog Measurement Software   *2No No No
Require MS2830A-066 and A0086A USB Audio
(See MX2690xxA series Measurement Software catalog for detail)
Note) MS2830A-043 cannot implement a signal generator for Rx test
(Because MS2830A-066 is required)
MX269020A LTE Downlink Measurement Software R R *1
MX269020A-001 LTE-Advanced FDD Downlink Measurement
Software R R *1U U Require MX269020A
MX269021A LTE Uplink Measurement Software R R *1
MX269022A LTE TDD Downlink Measurement Software R R *1
MX269022A-001 LTE-Advanced TDD Downlink Measurement
Software R R *1U U Require MX269022A
MX269023A LTE TDD Uplink Measurement Software R R *1
MX269024A CDMA2000 Forward Link Measurement Software  R
MX269024A-001 All Measure Function  RRequire MX269024A
MX269026A EV-DO Forward Link Measurement Software  R
MX269026A-001 All Measure Function  RRequire MX269026A
MX269028A WLAN (802.11) Measurement Software R R *1
MX269028A-001 802.11ac (80 MHz) Measurement Software R R *1R R Only for MS2830A. Require MX269028A
MX269030A W-CDMA BS Measurement Software  R
MX283027A Wireless Network Device Test Software ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
MX283027A-001 WLAN Test Software R R *1Require MX283027A*4
MX283027A-002 Bluetooth Test Software  RRequire MX283027A
MX283087A TRX Sweep Calibration No No R R Require MS2830A-020/021 and MS2830A-022
*1: MS2830A-045 cannot be installed MS2830A-005. Add MS2830A-009 in substitution for MS2830A-005.
*2: MS2830A-043 can implement only either MS2830A-020/021 or MS2830A-066.
By the system that MS2830A-066 is necessary, MS2830A-020/021 is not added to MS2830A-043.
*3: By the measurement of the narrowband signal, add MS2830A-066. (Channel bandwidth: x kHz to 100 kHz)
MS2830A-044/045 cannot be installed MS2830A-066.
*4: MX283027A-001 includes MX269911A WLAN IQproducer (Cannot order MX283027A-001 and MX269911A at same time).