ansio MINI Parts list manual

MINI DEHUMIDIFIER
INSTRUCTION AND OPERATING MANUAL

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
2
THANK YOU
We thank you for purchasing our appliance and understand that this purchase
represents your trust in us. To demonstrate our gratitude, please feel assured
that we aspire to deliver the best value to you in return. We are proud of our
creation and take every precaution to avoid problems. If, in the rare
occurrence, a damaged or faulty appliance reaches you, DO NOT
hesitate to contact us. Our responsive customer service team will happily
assist you regarding any aspect or problems with your purchase.
You can contact us by:
•Sending an email to [e-mail]
•Calling us on 0800 080 6781 (Toll Free) or [phone]
GUARANTEE
This product comes with a standard One-year warranty against all
manufacturing defects. In addition, register your purchase at
www.ansio.co.uk within 15 days, and you can get an additional one-
year FREE Extended Warranty. Terms and conditions apply. Visit our
website for more info.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended. Contact us in case you need to return the faulty goods. If you have
any issues, please contact our customer service.
Note: This does not affect your statutory rights.
FEATURES
The mini dehumidifier adapts Peltier Technology (no compressor). It is light
weight. It is ideal for small rooms and poorly ventilated areas such as
wardrobes, cabinets and storage rooms that are more susceptible to damp
odours and fungal growth. The dehumidifier helps to eliminate unwanted
moisture from the air.

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
3
COMPONENTS
TECHNICAL SPECIFICATIONS
Size:
156 x 130 x 220 mm
Coverage area:
<15 m2
Dehumidifying Capacity:
Approximately 250ml (9oz) per day
at 30°C (86°F) and RH80%
Cooling Element:
Thermo-Electric Peltier Module
Fan:
80mm x 80mm Brushless Motor
Input:
DC9V 2.5A
Power:
21 W
Maximum Tank Capacity:
500ml (18oz)
Noise:
34 dB
Ambient temperature:
10 - 50°C

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
4
IMPORTANT NOTE ON PERFORMANCE
The dehumidification capacity is impacted by the room operating
parameters, temperature, humidity, size and whether the windows/doors
are open. For optimal results, make sure that the room parameters are
within the operating range of the appliance.
SWITCHING ON
1. Remove the power adapter from the box. Connect it to both the
dehumidifier and the main wall socket.
2. Switch the dehumidifier ON using the ON/OFF button. The green LED
will illuminate. You will also feel a light breeze blowing out of the dry
air outlet.
3. To switch OFF, press the ON/OFF button again.
REMOVING THE WATER TANK
The dehumidifier can collect up to approximately 250ml (9oz) of water per
day, assuming that the temperature is about 30°C (86°F) and Relative
Humidity RH 80%.
When the tank is full, the LED will turn YELLOW and the unit will turn OFF.
When the tank is full, turn OFF the dehumidifier and simply pull the water
tank out gently. Empty the water tank via the water displacement hole
after pulling out the rubber plug. After emptying, put the rubber plug back
on and carefully install the tank back in before turning the dehumidifier
ON.

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
5
CLEANING
Ensure the dehumidifier is turned OFF and unplugged from the wall socket.
Use a soft cloth to gently clean away any dust or debris from the outside
of the unit and air inlets.
WARNING
1. Ensure the dehumidifier is switched OFF when the unit is not in use.
2. DO NOT place the Power Adapter in a wet or damp place and ensure it
is in a well ventilated area.
3. Keep the front air inlets and top air outlets free from being blocked.
4. ALWAYS keep the dehumidifier in an upright position to avoid leakages.
5. Always empty the water tank and dry before storing away the
dehumidifier.
6. The water collected is not safe for consumption – dispose
appropriately.
7. When the Dehumidifier is in use, ensure that children and pets are
supervised.
8. Clean the air inlets regularly.
9. Ensure that the dehumidifier inlets and outlets are well-ventilated.
10. To avoid electrical/fire hazard, observe the following safeguards
a. DO NOT plug the dehumidifier into any other cord connected device,
such as a power strip/extension cord, surge protector, multiple
outlet adapter, universal adapter, cord reel or outlet-type air
freshener.
b. If the supply cord is damaged, it must be replaced by the
manufacturer. Please contact Ansio®Customer service.
11. The appliance should be stored in a room without continuously
operating ignition sources (for example: open flames, an operating gas
appliance or an operating electric heater).
12. Do not pierce or burn.

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
6
TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE SOLUTION
The appliance is
not working.
Power adapter is not
connected.
Plug the power adapter
to the mains socket.
Check if the other end is
connected to the
dehumidifier properly.
Water Tank is full.Empty the water tank.
Water tank is not
positioned properly.
Position the water tank
correctly.
Appliance does
not dehumidify.
Air inlet could be dirty. Clean the air inlet and
try again.
Air Inlets and/or
Outlets could be
blocked.
Keep the dehumidifier in
a well ventilated area.
Room is too big and/or
well ventilated.
Make sure that the room
is within the operating
parameters of the
device and if needed,
close off the cross-
ventilation in the room
to improve the
dehumidification.
Temperature in the
room is too low
causing less
dehumidification.
Raise the temperature
of the room by closing
off ventilation and
heating up, if needed
using non-steam
producing heating
appliances.

Contact Customer Support – 0800 080 6781 (UK Toll Free) or [phone]
ANSIO 1535 (Dec’20)
[e-mail]
7
Appliance makes
a noise when
working.
This is likely due to
placement of the
appliance on an
uneven/hard surface.
Place the appliance on a
smooth and stable
surface and try again.
Appliance stops
working suddenly.
This is likely due to the
room temperature
being outside the
operating temperature
range of the appliance.
The appliance will
resume functioning
when the room
temperature returns to
the operating range.
WASTE DISPOSAL
You can help protect the environment! Please remember to
respect local recycling laws. Dispose of faulty or unwanted
electrical appliances in accordance with local policies and service
centres.
•This item must not be disposed of with household waste.
•Please recycle where facilities exist. In the interests of health, safety and
the environment, please check with your Local Authority for recycling
advice.
•By ensuring that you dispose of your old electrical and electronic
equipment according to The European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE), you are helping to preserve
our natural resources.
For your nearest disposal facility, visit www.recycle-more.co.uk
Environmental Agency Registration Number for ANSIO: WEE/MM6674AA

Ansio Ltd.,
PO Box 106, Banstead, SM7 9BU, UK
[e-mail]
www.ansio.co.uk