Anthro USB Sync Kit User manual
WELCOME
Hello! Thank you for choosing Anthro.
These instructions describe the
installation of Anthro's USB Sync Kit.
If you have any questions or if we can
help you in any way, please contact
Anthro at 800.325.3841.
PARTS LIST
Before beginning this assembly, please take a moment to
review the parts list below to verify that your shipment
is complete. The Tablet Charging Cart and devices are not
included with this item.
Product Quantity Part Number
01 10-port USB Hub w/Power Adapter and 1 400-5438-00A
one USB connector for laptop
02 Data Cables 10
4-foot 30-pin to USB 400-5458-00
1-meter Lightning to USB 400-5469-00
03 Laptop Data cord 1 400-5438-00B
04 AC power cord 1 400-5438-00C
Anthro Corporation®| 10450 SW Manhasset Dr. | Tualatin, OR 97062
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
ASSEMBLY INSTRUCTIONS
USB Sync Kit
for Anthro Tablet Charging Carts and Cabinets
01
02
Shown with 40-unit Tablet Charging Cart, not included.
03
04
Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
CONGRATULATIONS! YOUR USB SYNC KIT INSTALLATION IS COMPLETE!
*300-5565-00*
300-5565-00
Rev B, March 2013
Warranty:
The USB Sync Kit has a one-year warranty
against manufacturing defects.
Notices:
Technology Furniture is a trademark of Anthro
Corporation. Anthro reserves the right to
modify the design and specifications
without prior notice.
STEP 1 - CONNECT
Verify that your iPads are fully charged. Without a full
charge, devices will not sync.
Connect the hub to the power on the cart or cabinet. [A]
Connect your powered-up laptop to the hub using the
cord that came with the kit. [B]
Connect your devices to the hub, either [C] at the IT Area
(by unplugging the cords from the power adapter and
plugging them into the hub) or [D] at the User Area (by
disconnecting the charge cord from device and plugging
in the cords that came with the kit).
Connect the cart or cabinet to the power in the room.
STEP 2 - TURN IT OFF
Turn off the power switch on the cart or cabinet.
STEP 3 - TURN IT ON
Turn on the power switch on the cart or cabinet. Restoring power to your
device prompts it to check for updates.
A
D
C
B
