AnthroDesk MDESK-TMP-L1 User manual

Parameter instruction
Electric Control Part:
Input Voltage:100-240V can be use
Output Voltage:18V DC
Duty cycle:10%MAX 2min on 18 min off
Switch power supply,low energy consumption
Manual device can move and long press
Desk frame part:
built-in limit switch
Dynamic load:120KG
The maximum static load:140KG
Load speed:30mm/s
Lift range:640mm---1290mm
The length of the adjusting range:1100mm~1600mm
Other part:
Packing Size：1080*270*325mm 2Set
Gross weight:45KG
Safety and warnings
This appliance can be used by children aged from 8 and above and persons
with reduced physical,sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.Children shall not play
with the appliance.Cleaning and user maintenance shall not be made by children
without supervision.
This marking indicat es that this product
should not be disposed with
other household wastes throughout the EU.
To prevent possible harm to the environment or
human health from uncontrolled waste
disposal ,recycle it responsibly to promote the
sustainable reuse of material resources.To return
yourused device,please use the return and
collection systems or contact the retailerwhere
the procuctwas purchased.They can take this
product for environmental safe recycling.
Correct Disposal of this product
1

Desk frame installation instructions
legs 3pcs
Desk base-680 2pcs
Long Tube 4pcs
Horizontal tube-390 1pcs
Motor wires 3pcs
Power connecting 1pcsHandset 1pcs
Control box 1pcs
M8*10 16pcs
+2pcs(Backup) M8*25 8pcs
+2pcs(Backup)
M6*14 8pcs
+2pcs(Backup)
ST3.5*16 4pcs
+1pcs(Backup)
glides 6pcs
Handset wire 1pcs
Part lists
Horizontal tube-600 2pcs
Desk base-400 1pcs
Link block1 2pcs Link block2 2pcs
M6*14 8pcs
+2pcs(Backup)
2

Link block2 2pcs
Link block1 2pcs
M6*14 6pcs
M8*10 4pcs
1.Link block instructions
Loose the four screws and adjust to
the suited length，then screw it on tightly
M8*10 12pcs
The rotation angle between
two brackets can be
adjusted from 90° to 180°.
2.Long tube instructions
Leg 1pcs
Long tube 4pcs
Leg 2pcs
OPERATION INSTRUCTIONS
3

Motor wires 3pcs
Handset wire 1pcs
M6*14 4pcs
glides 6pcs
M8*25 12pcs
Desk base-680 2pcs
Desk base-400 2pcs
Control box 1pcs
Power connecting 1pcs
3.Desk base instructions
OPERATION INSTRUCTIONS
4.Control box instructions
4

ST3.5*16 2pcs
Handset 1pcs
Horizontal tube-600 2pcs
M8*10 6pcs
Horizontal tube-600 2pcs
Horizontal tube-390 1pcs
OPERATION INSTRUCTIONS
5.Horizintal tube instructions
6.Handset instructions
5

Handset Usage Instruction
the height will go to 720mm
Touch the key and release it
the second memory position,pressand hold
the key in 5 seconds for memory this positon
the first memory position,pressand hold
the key in 5 seconds for memory this positon
display screen
display height 640-1290mm
Touch and hold the keys down when arrived your positon pls release it
Touch and hold the keys Rises when arrived your positon pls release it
M ode of operation
1.Lightly touch up/down button and hold the key to rise and down
the desk height
2.Press HOME button quickly release to certain height 720mm to
the normal desk height
3.M1,M2 press and hold the key in 5 seconds,and sounds
“Bi” just memory this positon
4.30S no touch any button,display screen and all light shot down
5.After display screen shot down into locked,M1/M2,HOME can’t
use anyway, you should touch up
or down first,it can be use when the display screen light up
6.Installation method have 2 types,if you want to amount on the desktop,
The size of the hole shouldcut at your left or right .
6