AnyTone AT-3318UV User manual

A1.140813

DUAL BAND HANDHELD RADIO
INSTRUCTION MANUAL

THANK YOU FOR YOUR PURCHASE!
transceivers will provide you with reliable, clear and efficient communication service. These
transceivers use innovative DSP (digital signal processing) technology for best stability and reliability. They
are meticulously built, durable and include plenty of features for both Amateur Radio and Commercial users.
Features include 199 memory channels, memory banks, UV-VV-UU modes, dual PTT (programmable), 51
groups CTCSS encode/decode, 1 group user-dened CTCSS encode/decode, 1024 groups DCS encode/
decode, plus 2Tone, 5Tone and DTMF encode/decode. Unique features include the ability to adjust squelch
level on-the-y, display both channel mode and frequency mode at the same time, skip interfering channels
while scanning and choose single or dual PTT buttons. The frequency of named channels can be easily
displayed and the scanning rate of channels is adjustable via software. Some versions of AT-3318 are true
dual band radios, having the ability to receive two signals at the same time and the ability to cross-band
repeat.
Radio Versions
Version A: Dual Band Radio. Dual frequency, dual standby, dual display, dual band, single receive channel.
RX & TX 136-174 & 400-520 MHz / RX 64-107.9 FM
Version D: Dual Band Radio. Dual frequency, dual standby, dual display, dual band, dual receive channel,
cross-band repeaterfunction, MSK function, 2TONE/MSK encode/decode, frequency hopping
function (FHSS). RX & TX 136-174 & 400-520 MHZ / RX 64-108 FM
118-136 MHz AM / 2.3-29.99 MHz AM / 520-1710 kHz AM
Version E: Tri-Band Radio. Dual frequency, dual standby, dual display, dual band, dual receive channel,
cross-band repeater function, MSK function, 2TONE/MSK encode/decode. TX 136-174 & 222-
225 & 400-520 MHZ
RX 136-174 & 220-260 & 400-520 MHz / 64-108 FM / 117-137 MHz AM / 2.3-29.99 MHz AM /
520-1710 kHz AM

MODELS APPLY TO THIS MANUAL
AT-3318UV FM transceiver
AT-3318UV(Version A) programming software: QPS3318UVA_USA
AT-3318UV(Version D) programming software: QPS3318UVD_USA
AT-3318UV(Version E) programming software: QPS3318UVE_USA
PROGRAM CAUTIONS
When programming the transceiver, read the factory initial data rst, then rewrite the frequency and
signaling etc., other wise errors may occur because of different frequency ranges involved.

CAUTIONS
transceivers are designed with advanced technology and the following tips will be helpful for the safe usage
of this transceiver and maintaining warranty.
1. Keep the transceiver and accessories away from children.
2. Do not open or modify the transceiver in any way.
3. Use only factory approved battery and charger to avoid damage.
4. Use only factory approved antenna to prevent damage and ensure proper communication distance.
5. Avoid exposing the radio to sunshine for long periods or storing it in hot places. High temperatures will shorten the life of
electronic devices and may cause res.
6. Avoid storing the radio in dusty, dirty or damp areas. Remove battery during long storage periods.
7. Keep the radio dry. Do not wash radio with harsh chemicals or detergents.
8. Do not transmit without an antenna.
9. When using this transceiver, we recommend transmitting for 1 minute then receiving for 4 minutes. Continuously
transmitting for a long time on high power may heat the back of the transceiver. Do not place the transceiver's hot back
close to any plastics.
10. If any abnormal smell or smoke comes from the transceiver, turn off the power, remove the battery and contact your
local dealer.
NOTE：
All the above tips apply to your transceivers accessories. If any device does not operate normally, please
contact your local dealer.
If you use any accessories made by other companies, does not guarantee the operability
and safety of the transceiver, plus your warranty may be voided. This includes the use of after market
programming software.

I
TABLE OF CONTENTS
UNPACKING.................................................................................................................................................................................................... 01
Supplied Accessories ......................................................................................................................................................................... 01
STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES............................................................................................... 02
Standard Accessories.......................................................................................................................................................................... 02
Additional Accessories........................................................................................................................................................................ 02
OPERATION MODE (AMATEUR TRANSCEIVER OR PROFESSIONAL TRANSCEIVER) ................................. 03
WORKING MODE ........................................................................................................................................................................................ 04
BATTERY INFORMATION........................................................................................................................................................................ 05
Charging Operation .............................................................................................................................................................................. 05
Battery Charger Type........................................................................................................................................................................... 05
Notice for Charging Battery .............................................................................................................................................................. 05
How to Charge........................................................................................................................................................................................ 06
Charging Prompt.................................................................................................................................................................................... 08
How to Store the Battery.................................................................................................................................................................... 08
INSTALLATION & CONNECTION........................................................................................................................................................ 09
Installing / Removing the Li-ion Battery...................................................................................................................................... 09
Installing / Removing the Antenna................................................................................................................................................. 10
Installing / Removing the Belt Clip ................................................................................................................................................ 10
Installing Optional Speaker / Microphone.................................................................................................................................. 10
GETTING ACQUAINTED.......................................................................................................................................................................... 11
LCD Display ............................................................................................................................................................................................. 11
BASIC OPERATIONS................................................................................................................................................................................. 14
Turn the Radio On & OFF ................................................................................................................................................................. 14
Adjusting Volume................................................................................................................................................................................... 14
Switch between Main band and Sub band ............................................................................................................................... 15

II
TABLE OF CONTENTS
Switch between Channel mode and VFO mode.................................................................................................................... 15
Channel Adjusting ................................................................................................................................................................................. 15
Frequency Adjusting............................................................................................................................................................................. 15
Frequency Input by Keypad ............................................................................................................................................................. 16
Channel Input by Keypad .................................................................................................................................................................. 16
Squelch Off Momentary / Squelch Off......................................................................................................................................... 16
Receiving................................................................................................................................................................................................... 17
Transmitting.............................................................................................................................................................................................. 17
Emergency Alarm .................................................................................................................................................................................. 18
Side Key [PF1] function instruction............................................................................................................................................... 18
Side key [PF2] function instruction................................................................................................................................................ 19
Edit channel.............................................................................................................................................................................................. 19
Delete channel........................................................................................................................................................................................ 19
Programming scan................................................................................................................................................................................ 20
SHORTCUT OPERATIONS ..................................................................................................................................................................... 21
Turn On/ Off FM Radio........................................................................................................................................................................ 21
Add/Cancel Optional signal decode function........................................................................................................................... 21
CTCSS/DCS Scan................................................................................................................................................................................ 22
Offset Frequency Direction Setup................................................................................................................................................. 23
Frequency/Channel Scan.................................................................................................................................................................. 23
Channel Scan Skip ............................................................................................................................................................................... 24
Frequency Reverse .............................................................................................................................................................................. 24
TX Power selection............................................................................................................................................................................... 25
Talk Around function............................................................................................................................................................................. 25
DTMF code Transmit and Enquiry ................................................................................................................................................ 25
Keypad lock.............................................................................................................................................................................................. 26

III
TABLE OF CONTENTS
Single-band Switching......................................................................................................................................................................... 27
CTCSS/DCS Encode and Decode................................................................................................................................................ 27
Cross-Band Repeater(Version D and Version E) .................................................................................................................. 27
Function Menu Setup(Version A) ........................................................................................................................................................ 28
Function Menu Setup(Version D and Version E)......................................................................................................................... 35
Senior Function Operations ................................................................................................................................................................. 42
Display Mode Setup............................................................................................................................................................................. 42
Resume Factory Default .................................................................................................................................................................... 42
Cloning Cable.......................................................................................................................................................................................... 43
Memory Bank................................................................................................................................................................................................. 45
Memory Bank Switch........................................................................................................................................................................... 45
Memory Bank Exit................................................................................................................................................................................. 45
Bank Linking............................................................................................................................................................................................. 46
Programming software starting (Takes Windows XP system for example) ........................................................... 47
TECHNICAL SPECIFICATION............................................................................................................................................................... 48
TROUBLE SHOOTING GUIDE.............................................................................................................................................................. 50
ATTACHED CHART..................................................................................................................................................................................... 52
CTCSS Frequency Chart................................................................................................................................................................... 52
1024 groups DCS Frequency Chart............................................................................................................................................. 53

01
UNPACKING
Please carefully unpack the transceiver. We recommend that you identify the items listed in the following
table before discarding the packing material.
If any items are missing or have been damaged during shipment, please contact your dealer immediately.
Item Number Quantity
Antenna QA09UV1 1
Li-ion Battery QB-26L 1
Battery Charger QBC-26L 1
AC Adaptor QPS-01 1
Belt Clip BC01 1
Hand Strap GS01 1
Instruction Manual 1
Certicate 1
Supplied Accessories

02
STANDARD ACCESSORIES/ADDITIONAL ACCESSORIES
Standard Accessories
Additional Accessories
Antenna*1
QA09UV1
155/435MHz
*1.Note: For frequency range of antenna, please refer to
label indicated in the bottom of the antenna.
Li-ion Battery
QB-26L(1500mAh)
Spare Li-ion Battery
QB-37L(1800mAh)
Instruction
Manual
USB Programming
Cable PC03
Programming Software
QPS3318UV_USA
Earphone
HS03
Handheld Microphone
QHM22
Battery Charger
QBC-26L
AC Adaptor
(12V/500mA)
QPS-01
Belt Clip
BC01
Battery Pack for Car
Charger CPS01
Telescopic antenna
QA10UV
Cloning Cable
CP04
Car Charger
CPL03
Hand Strap
GS01

03
This transceiver is a high performance amateur transceiver with dual band, dual standby, dual display and
other functions. Depending on your need, you can set the radio to operate as an Amateur Transceiver or
Professional Transceiver. There are 3 levels of operation menu to set functions as you need. It is easy and
convenient.
Operation Mode:1.
By programming software:A. In PC software's "General Setting" menu to
choose "Display Mode", channel mode works as Professional transceiver,
other two modes as Amateur transceiver.
By manual setup:B. Please refer to "Display Mode" in Page 42.
Amateur Transceiver Mode:
2. Except setting as CH mode, others considered
as Amateur transceiver mode. Under this mode, press key to switch
between Channel mode and VFO.
Frequency + Channel mode:A. At this mode, When set display as "FREQ", it
enters into Frequency+Channel mode, new setting of channel operation and
shortcut operation can be temporarily used by user. Once the radio is turned
off or switched to another channel, the temporary setting will be erased and
back to initial settings.(As pic 1)
Channel+Name Tag Mode:B. When set display as "NAME", it enters into
Channel+Name Tag Mode. At this mode, it will display corresponding
channel name when the current channel is edited with name. Otherwise, it
will display frequency + channel. Its operations are the same as frequency +
channel mode. (As pic 2)
OPERATION MODE (AMATEUR TRANSCEIVER OR
PROFESSIONAL TRANSCEIVER)
(Pic 1)
(Pic 2)
(Pic 3)
(Pic 4)

04
WORKING MODE (AMATEUR TRANSCEIVER OR
PROFESSIONAL TRANSCEIVER)
VFO Mode(Frequency mode):C. This mode shows only frequency on the display. Shortcut operation
and Channel setting will be changed & stored as the latest value permanently. Once the radio is
turned off or changed to new VFO frequency, the value is remained until next change.(As pic 3)
Professional Transceiver Mode:
3. When set display mode as "CH", it enters into Professional Transceiver
mode. In this mode, except scan, DTMF encode or editing, and keypad lock, other functions should be set
by PC software (As pic 4).
NOTE:If transceiver is programmed as professional mode and locked, you can't return to amateur transceiver
mode manually from Background operations setting.
Under every mode, background operations can be changed and saved.
4.

05
BATTERY INFORMATION
Charging Operation
The battery is not charged at the factory, please charge it before use. Charging the battery for the rst time
after purchase or extended storage (more than 2 months) may not bring the battery to its normal operating
capacity. After fully repeating the charge/ discharge cycle for two or three times, the operating capacity will
reach the best performance. The battery life is over when its operating time decreases even though it is
fully and correctly charged. Replace the battery.
Battery Charger Type
Please use our company's designated charger, other models may cause explosion and injure people. After
installing the battery, if the radio red light twinkles and remind changing battery, please charge the battery.
Notice for Charging Battery
Do not short circuit the charger. Never attempt to remove the battery case or modify it in any way.▲
The ambient temperature should be between 5▲℃ and 40℃when charging. Charging outside this range
may not fully charge the battery.
Always switch off the transceiver before charging the battery, otherwise it will interfere with correct▲
charging.
To avoid interfering the charging procedure, please do not cut off the power or take out the battery▲
during charging.
Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or▲
damage the battery.

06
How to Charge
Plug the AC adaptor into the AC outlet, then plug the1.
cable of AC adaptor into the DC jack, the indicator
lights orange for 1s and turns into GREEN---waits to
charge.
Slide the battery or transceiver with battery into the2.
charger; make sure the battery terminals are in contact
with the charging terminals. LED turns into twinkling
RED---pre-charging begins.
Pre-charging for about 5 minutes, LED twinkles stop 3.
then charging begins.
It takes about 4 hours to fully charge the battery,4.
when LED turns into GREEN— full charged.
BATTERY INFORMATION
WARNING:
When keys, coins, ornamental chains and other conductive metals make contact with the battery terminals,
the battery may cause fire or physical harm. If the battery terminals short circuit, it will generate a lot of heat
and possible fire, so please be careful when you handle or use the battery, please store battery and/or radio
in an insulated container. Do not put it into a metal container.
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.▲
Ac Input

07
NOTE: When charging a powered-on transceiver equipped with battery, the LED will not turn green to
show the full charge status. Only when the transceiver is off, can the LED indicate normally.
When the transceiver is powered on, it will consume energy and the charger cannot indicate if the battery
has been fully charged.
BATTERY INFORMATION
STATUS self-examine
when power on (No battery) Pre-charging Charge normally
Full
Charged Trouble
LED Orange
(for 1 second) Green Red light twinkles for 5 minutes Red Green Red twinkles for a long time
Charging Process:
5.
LED Indicator:6.
NOTE: Trouble means battery heating, battery short-circuit or charger short-circuit.
Status LED
Standby (self-examine orange lights
1second when power on)
Pre-charging (pre-charging stage)
Charging (charge in constant currency)
Full charged (charge in constant voltage)
Green light
Red light twinkles for about 5 minutes
RED light lightens for about 4 hours
Green light

08
How to Store the Battery
If the battery needs to be stored for a long1.
period, the battery should be removed from
the radio. It's state of charge should be 50-
100% of full charge.
It should be kept in low temperature, dry2.
environment.
To keep away from hot places and direct3.
sunlight.
Charging Prompt
Self- examination: When charging, ORANGE light twinkles for 1 second and goes out. That means the 1.
charger has passed its self-examination and it can charge the battery normally. If the light remains orange
or the red light twinkles, it means the charger can not pass its self-examination or charge the battery.
Trickle pre-charging: When the battery has been inserted into the charger and red light twinkles, which2.
means the remnant voltage is low, the charger trickle charges the battery (pre-charging status), until the
battery reaches a certain electric quantity, then the charger automatically turns to normal charging. If the
red light stops twinkling, it means the remnant voltage meets a certain electric quantity, and the charger
will charge the battery normally.
BATTERY INFORMATION
NOTE:The time for Trickle pre-charging should not exceed 30 min. If after 30 min, the red indicator is still
twinkling, it means it is unable to charge battery. Please kindly check battery and charger.
WARNING
▲Do not short circuit battery terminals.
▲Never attempt to remove the casing from the battery
pack.
▲Never assemble the battery in dangerous surroundings,
spark may cause explosion.
▲Do not put the battery in hot environment or throw it
into fire, it may also cause explosion.

09
INSTALLATION & CONNECTION
Match the three grooves of the battery pack with the corresponding 1.
guides on the back of the transceiver and push.
Press the battery pack and transceiver rmly together until the
2.
release latch on the top of the transceiver locks. After hearing a
"click" sounds, the battery has been locked.
To remove the battery pack, slide up the release latch and
3.
remove the pack away from the transceiver.
Installing / Removing the Li-ion Battery
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna base and turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.

10
INSTALLATION & CONNECTION
Installing Optional Speaker / Microphone
Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
Note:The transceiver is less water resistant while using the
Speaker/Microphone.
Installing the Hand Strap
Slide the loop of the hand strap through the eyelet on
the upper rear of the transceiver, pull the entire hand
strap through the loop to secure the hand strap in place.
Installing / Removing the Belt Clip
■ Installing the Belt Clip:
Place the belt clip over the corresponding holes on the
back of the transceiver, and install supplied screws.

11
GETTING ACQUAINTED
LCD Display
On LCD display screen, you will see various icons which stand for the selected functions and sometimes
you may forget the meaning of them. Here you will nd the following table extremely useful.
Frequency
Reverse
Offset Frequency
DCS
Optional Signaling
CTCSS
FUNC Icon
The arrow points to
main channel
FM radio
TX Power
Busy Channel
VOX Function
Scan Skip
Narrow band
Battery Capacity
Function Menu
Number, Channel
Number
FM Channel Number
channel Number
Keypad Lock
NOTE:
Battery capacity indicator(full) No power, replace battery pack or charge battery
Real time display receiving signal
strength/Power Indicator
Battery capacity remnant