AOC AGON PRO AG276QZD User manual

OLED Display
User Manual
1
2023 AOC.All Rights Reserved©
www.aoc.com
Based on the characteristics of OLED products, it is recommended
that you follow the user manual for screen maintenance to reduce
the risk of image retention.
AG276QZD
Machine Translated by Google

Adjusting the monitor................................................ ................................................... ................................................... ..................... 15
Hotkeys .................................. ................................................... ................................................... ................................................. 15 OSD
Settings .. ................................................... ................................................... ................................................... .....16 OSD Key
Guide ................................... ................................................... ................................................... .... 16 Game Settings ( Game
Settings ) ................................................ ................................................... ................................ 19 Luminance
(brightness) .......... ................................................... ................................................... ................ 21 PIP Setting (PIP
setting) .......................... ................................................... ................................................ 23 Color Setup (Color
Settings) ................................................ ................................................... ................................... 24 Audio
( Audio ) ................................ ................................................... ................................................... ................................... 26 Light FX ( E-
sports Atmosphere Light ) .......................... ................................................... ................................................... .................. 27 Extra
(Others) ................................... ................................................... ................................................... ...... 28 OSD Setup (OSD
Setup) ................................................ ................................................... .................................. 30 LED
Indicators .................. ................................................... ................................................... ................................................ 31
safety ................................................ ................................................... ................................................... ................................... 1 Logo
Conventions ................................ ................................................... ................................................... ................................................... 1 Power
supply ................................................ ................................................... ................................................... .............. 2
Installation .................................. ................................................... ................................................... ................................................ 3
Cleaning .. ................................................... ................................................... ................................................... ................... 4
Others .............................................. ................................................... ................................................... ................................................. 5
Specifications ................................................... ................................................... ................................................... ................................ 33 Main
Specifications ................................ ................................................... ................................................... ................................................ 33 Preset
Displays mode ................................................ ................................................... ................................................... ...... 35 Pin
Assignments ................................................ ................................................... ................................................... .................. 36 Plug and
Play .................................. ................................................... ................................................... ................................................ 37
i
Troubleshooting ................................................ ................................................... ................................................... ................................... 32
settings ................................................ ................................................... ................................................... ................................. 6 List of
Items .................................. ................................................... ................................................... ................................................... 6 Mounting
brackets and bases ................................... ................................................... ................................................... ..... 7 Screen
Maintenance .............................................. ................................................... ................................................... ...................................8Adjusting the
Viewing Angle ................................... ................................................... ................................................... ...................................................10Connecting
a Monitor ............ ................................................... ................................................... ................................................... . 11 G-SYNC Compatible
function ................................... ................................................... ................................................. 12 Adaptive-Sync
function ..... ................................................... ................................................... ................................... 13
HDR ................................... ................................................... ................................................... ................................................... .......... 14
Machine Translated by Google

logo convention
In this guide, blocks of text may have icons and be printed in bold or italics. These blocks of text are Notes, Notes, and Warnings, as follows:
The following subsections describe the notation conventions used in this document.
NOTICE: NOTICE indicates potential hardware damage or data loss and tells you how to avoid problems.
Note: A caution indicates important information that helps you make better use of your computer system.
Notes, Cautions and Warnings
WARNING: WARNING indicates a potential for personal injury and tells you how to avoid it. Some warnings may be in a different format or may not have an icon. In this case, the relevant regulatory agency
provides a special warning method.
1
Safety
Machine Translated by Google

To ensure proper and safe operation, use the monitor only with UL Listed computers that have electrical outlets that come standard with
The monitor should only be operated from the type of power source indicated on the label. If you are not sure about the type of power supplied to your home, check with your supplier or local power company.
2
The voltage is marked between AC 100-240V, and the minimum current is 5A.
The monitor comes with a three-point grounding plug, one with a third (ground) pin. This pin will only plug into a grounded power outlet as a safety device. If the outlet does not fit the three-prong plug, have
an electrician install the correct outlet, or use an adapter to ground the instrument safely. Please do not defeat the safety purpose of the grounding plug.
Wall outlets should be installed close to the equipment and should be easily accessible.
Unplug the unit during thunderstorms or when not in use for long periods of time. This protects the display from damage due to power surges.
For use only with the included power adapter
Overloading electrical outlets and external power cords. Overloading can cause electric shock and fire.
Manufacturer: Delta Electronics Co., Ltd. Model: ADP-120VH D
power supply
Machine Translated by Google

Leave the space shown below around the monitor. Additionally, air circulation may not be sufficient whereby overheating may cause a fire or damage to the display.
Do not place the monitor on an unstable cart, platform, tripod, stand or table. If the monitor falls, personal injury may result and serious damage to the product may result. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with this product. Install the product according to the manufacturer's instructions using the manufacturer's recommended mounting accessories. Care should be taken when moving
products on carts.
To avoid possible damage such as the panel coming off the bezel, make sure the monitor does not tilt downward more than -5 degrees. Monitor damage will not be covered under warranty if the maximum downward tilt
angle is exceeded -5 degrees.
Never push any foreign objects into the monitor cabinet slots. Otherwise, circuit components may be damaged, resulting in fire or electric shock. Never spill liquid on the monitor.
3
When the monitor is mounted on a stand, please refer to the following recommended ventilation areas around the monitor:
Please do not place the front of the product on the floor.
standing installation
If mounting the monitor on a wall or shelf, use a manufacturer-approved installation kit and follow the kit instructions.
12 inches
30cm
4 inches
10cm
Leave at least this space around
the monitor
4 inches
10cm
4 inches
10cm
Install
Installed with stand
Machine Translated by Google

Clean the cabinet regularly with a cloth. Stains can be scrubbed with soft cleaners, not harsh cleaners, which can corrode the product case.
Disconnect the power cord before disposing of the product.
When cleaning, do not allow cleaning agents to get into the product. The cloth should not be too rough as it will scratch the surface of the screen.
4
clean
Machine Translated by Google

Make sure the ventilation holes are not blocked by tables or curtains.
Please do not knock or drop the monitor while it is being operated or transported.
Please refer to the "Screen Maintenance" instructions.
Based on the characteristics of OLED products, it is recommended to use this product continuously for no more than 4 hours. This product uses a variety of technologies to eliminate possible image retention, with
Please do not use the monitor under vibrating vortex or high impact conditions during operation.
If the product emits a strange smell, strange sound or smoke, immediately disconnect the power plug and contact a service center.
5
other
Machine Translated by Google

set up
base
power cable
Wall hanging iron parts
OLED display
DP line
Wall-mounted iron parts screw screwdriver
Power Adapter
Simple instruction manual Warranty card
HDMI cable
The supplied signal cables (DP, HDMI and USB cables) vary by country. Please check with your local dealer or AOC branch for confirmation.
Note: Please keep the wall hanging iron parts and screws properly for future use.
bracket
usb cable
6
item list
* *
*
Machine Translated by Google

Mounting Brackets and Bases
1
3
2
M4x10mm
100mm
100mm
M4-P0.7
L=10+0
- 0.5
Dk=8.0±0.2 H=2.0±0.1
M=4.0Max
Wall hanging iron parts:
Install:
Wall hanging iron screw specification: M4*10mm Base screw specification: M6*13mm (effective thread 5.5mm)
Please follow the steps below to set up or remove the base.
7
tear down:
2 3
1
4
D3.86-3.92
Machine Translated by Google

• CPC (Convex Power Control, Convex Brightness Control ) In order to reduce the risk of image retention,
it automatically adjusts the brightness gain for different screens. The brightness control follows the convex mathematical model of high in the middle and low on both sides to reduce possible image retention . This setting defaults to On and cannot be turned
off.
So please don't use this mode for a long time.
• LBC (Local Brightness Control ) In order to reduce the risk of image retention, if the cumulative average
brightness of a certain area is too high, it will automatically reduce the brightness of this area to prevent the decline of the brightness effect of this area, so as to alleviate Possible image retention. This setting defaults to On and cannot be turned off.
,
• JB ( screen compensation correction ) / OFF RS (Off Real slow, image retention elimination ) is based on the characteristics of OLED
panels. If a static image with different colors or brightness intervals is displayed for a long time, image retention is likely to occur. In order to eliminate the image retention that may have occurred, it is recommended
to repeatedly run the screen compensation correction and image retention elimination functions regularly or irregularly to obtain ideal image viewing effects.
Based on the characteristics of the OLED screen, please perform screen maintenance according to the following requirements to reduce the risk of image retention. Damages
caused by failure to comply with the following instructions will not be eligible for free warranty service.
You can use any of the following methods to run this function: • In the
OSD menu, manually enable image retention removal, and select "Yes" according to the menu prompts. • When the monitor runs for 4 full
hours, a warning message will pop up automatically to prompt the user to maintain the screen. It is recommended to select "Yes". If "No" is selected, after the monitor has run for 24 hours, the reminder will be repeated every hour until the user selects "Yes".
• Try to avoid displaying still images. A still image
refers to an image that remains unchanged for a long time on the screen in full screen or in a partial area. Still images may cause permanent
damage to the OLED screen, image retention is characteristic of OLED screens. Please observe the following usage suggestions: 1. Do not properly reduce the brightness and
contrast of the screen when any still image
is displayed in full screen or partially on the monitor screen for a long time. 2. When watching a program in 4:3 format for a
long time 3. Watch the video in full screen if possible, not in a small window on the screen
(such as a video in an Internet browser page). 4. Do not stick labels
or stickers on the screen to reduce the possibility of screen damage and image retention.
• It is recommended to use this product continuously for no more than 4 hours.
8
as this can cause image retention on the screen
This product employs the following various technologies to eliminate image retention that may occur. It is strongly recommended that you use the default values and keep each function "ON" to avoid image retention on the OLED screen and maintain the best
use of the OLED display.
To avoid this problem please display the
• LEA (Logo Extraction Algorithm , regional image retention prevention ) In order to reduce the risk of image retention, it
is recommended to enable the regional image retention prevention function. After it is turned on, the brightness of the fixed display
area at the four corners of the screen will be automatically reduced to reduce possible image retention. This setting is "ON" by default and can be set in the OSD
menu.
,
• TPC (Temporal Luminance Control ) In order to reduce the risk of image retention, when a still image is displayed for a long
time, the brightness of the image will be automatically reduced to reduce possible image retention. This setting defaults to On and cannot be turned off.
,
• Orbit ( image offset ) In order to
reduce the risk of image retention, it is recommended to enable the image offset function. After it is turned on, the
image pixels will move cyclically as a whole, and the moving track is in the shape of a "day", and the moving range is related to the strength of the setting, and it moves once every 1 minute. The moved characters may have their edges trimmed. When
Strongest is selected, image retention is least likely, but possible edge clipping is most noticeable. When "Off" is selected, the image returns to the best position. This setting defaults to "On" ("Weak") and can be set in the OSD menu.
Different marks are left on the left and right sides of the screen and the edge of the image ,
screen care
Machine Translated by Google

The monitor will automatically run the screen compensation correction first, and then run the image sticking removal. During the operation of screen compensation and calibration, please keep the power on and do not operate any buttons,
the power indicator light will flash in white (3 seconds on/3 seconds off), and this process will take about 30 seconds. When finished, the monitor then runs Image Retention Elimination. Image sticking removal
function, the whole process takes about 10 minutes. Please keep the power on, do not operate the button, the power indicator will flash white (1 second on/1 second off). After the end, the power indicator light is off or orange, and the monitor
enters a shutdown or standby state.
9
• When the monitor has been running for 4 hours in total, it will automatically perform screen compensation correction and image retention elimination after pressing the button to turn off or enter the standby state for 2 hours.
During the running process, if the user presses the power button to turn it on, the running process will be interrupted and the display screen will be restored. This process needs to wait for about 5 seconds. The monitor automatically runs the
screen compensation correction and image retention elimination functions in the standby state and cannot be interrupted. In the OSD menu "Others", you can check the number of times the Image Retention Elimination function has been
run.
Machine Translated by Google

90° 90°
130mm
In order to achieve the best viewing effect, it is recommended that you face the front of the monitor and adjust the viewing angle according to your
personal preferences. When changing the angle of the monitor, please support the arm so that it does not
touch the monitor. You can adjust the monitor angle within the following ranges:
Notes:
* Monitor design may differ from illustration.
Do not touch the OLED screen when adjusting the angle. Otherwise, the OLED screen will be damaged.
1. To avoid possible screen damage (such as panel falling off), please make sure that the monitor does not tilt downward more than -5 degrees.
2. Do not press down on the screen when adjusting the monitor angle, just hold the frame.
warn
10
30°30°
0° 90°
-5°
Adjust the viewing angle
Machine Translated by Google

6. USB upstream 7.
USB3.2 Gen1 downstream + fast charge x1
2. HDMI 1
Cable connections on the back of the monitor:
USB3.2 Gen1 downstream x1 8.
Headphone jack
To protect the monitor, always turn off the monitor and computer before connecting.
3. HDMI 2
11
Connecting to a
computer: 1. Turn off the computer and unplug the power
cord. 2. Connect the signal cable to the video input connector on the back of the monitor and the video output connector of the
computer graphics card. 3. Connect the display signal cable to the video
connector on the computer. 4. Plug the monitor and computer power cords into
nearby electrical outlets. 5. Turn on the monitor and computer.
4. DP1
If the monitor displays an image, the installation is complete. If the monitor does not display an image, refer to Troubleshooting.
5. DP2
1. Power supply
1
5
2 4 6 8
7
3
connect monitor
Machine Translated by Google

Windows 7
1. This product supports G-SYNC Compatible function. G-SYNC Compatible function can run under DP interface. 2. To enjoy the
perfect gaming experience brought by the G-SYNC function, you need to purchase an NVIDIA GPU graphics card that supports the G-SYNC function separately.
Windows 7
System Requirements: DisplayPort 1.2 that comes with the GPU must be supported.
G-SYNC system requires
a desktop computer connected to a G-SYNC monitor:
Supported graphics cards: G-SYNC functionality requires an NVIDIA GeForce® GTX 650 Ti BOOST or better graphics card. Driver:
R340.52 or later OS:
System Requirements: Must support DisplayPort 1.2 driven directly from the GPU.
Laptops connected to G-SYNC monitors: Supported
graphics cards: NVIDIA GeForce® GTX 980M, GTX 970M, GTX 965M GPU or better. Driver: R340.52 or later OS:
Windows 10
Visit the following website to get more information about NVIDIA G-SYNC: https://
www.nvidia.cn/
Windows 10
Windows 8.1
12
Windows 8.1
G-SYNC Compatible function
Machine Translated by Google

• AMD PRO A10-9700E
• AMD PRO A8-8650B
• AMD A10-7800
• AMD PRO A12-9800E
• AMD PRO A10-8770E
• AMD RyzenTM 7 2700U
• AMD RyzenTM 5 2500U
• AMD RyzenTM 5 2400G
• AMD RyzenTM 3 2300U
• AMD RyzenTM 3 2200G
• AMD PRO A12-8870E
• AMD A10-7870K
• AMD PRO A6-9500E
• Radeon™ RX Vega series
• Radeon™ RX 500 series
• Radeon™ RX 400 series
• Radeon™ R9/R7 300 series (excluding R9 370/X, R7 370/X, R7 265)
• Radeon™ Pro Duo (2016
edition) ) • Radeon™ R9
Nano series • Radeon™ R9
Fury series • Radeon™ R9/R7 200 series (excluding R9 270/X, R9 280/X)
• AMD PRO A4-8350B
• AMD A6-7400K
• AMD PRO A8-9600
• AMD PRO A6-8570
• AMD A8-7650K
• AMD PRO A10-8750B
• AMD A10-7700K
• AMD PRO A10-9700
• AMD PRO A10-8770
• AMD A10-7850K
• AMD PRO A12-9800
• AMD A10-7890K
processor
• AMD PRO A12-8870
13
1. This product supports Adaptive-Sync function. Adaptive-Sync function can run under HDMI/DP interface. 2. Compatible video card models are
recommended as follows. Compatible graphics card models are constantly being updated, please consult the graphics card manufacturer for the actual situation, or visit https://www.amd.com for inquiries:
graphics card
• AMD PRO A6-9500
• AMD PRO A6-8570E
AMD A8-7600
• AMD A8-7670K
Adaptive-Sync function
Machine Translated by Google

Compatible with input signals in HDR10
format. The monitor is automatically HDR enabled, but you need a compatible player and content. For information and content on HDR compatible devices, please contact the device
manufacturer and content provider. When you don't want the HDR function to start automatically, please select "Off".
Display
settings: 1. 3840x2160@50Hz/60Hz is only used on UHD players or devices such as Xbox/PS. 2. Display
settings: a. Enter
"Display Settings", select 2560x1440 for resolution, and select On for HDR. b. Change the
resolution to 2560x1440 to achieve the best HDR effect.
14
HDR
Machine Translated by Google

4 3
2
5
1
hotkey
Game Mode / Left
2 crosshairs/down
When the OSD menu is closed, press the "Left" key to open the game mode function, then based on different game types, press the "Left" or "Right" key to select the corresponding game mode (first
person shooter, real-time strategy, racing, Player 1, Player 2 or Player 3).
E-sports ambient light / right
3 game modes/reduce/left
4 E-sports atmosphere light/increase/right
When the OSD menu is closed, press the "Right" button to open the gaming atmosphere light adjustment menu, and adjust the intensity, mode and color of the gaming ambient light according to the
needs of use.
5 Power switch/menu/select
Source Switch/ On
Power Switch / Menu / Select
When the OSD menu is closed, press the "Up" key to activate the signal source switching function, press the "Up" key or "Down" key continuously to select the signal source displayed in the information
column, press the "Menu" key to adjust to the selected signal source.
When the display is off, press this key to turn on the display. When the monitor is
on, press this key to activate the OSD menu or confirm function adjustment; when the OSD menu is off, press and hold this key for about 2 seconds to shut down.
15
front sight / down
When the OSD menu is closed, press the "down" key to open or close the game crosshair. The game crosshair will automatically turn off when the monitor is turned on/off.
1 Source switch/up
adjust monitor
Machine Translated by Google

OSD settings
Enter
Enter
Enter
Move
Move
Move
Exit
Exit
Exit
Enter Move
Exit
Enter
SelectEnter
Select
OSD Button Guide
Confirm: Use the Enter key to enter the next level of
OSD Move: Use the Right/Up/Down keys to move the OSD Select
Exit: Use the Left key to exit the OSD
Move: Use Left/Right/Up/Down keys to move OSD selection
Confirm: Use the Enter key to apply OSD settings and return to the previous
OSD Select: Use the Down key to adjust OSD settings
16
Exit: Use the Left key to exit the OSD to the previous OSD
Confirm: Use the Right key to enter the next OSD
Select: Use the Up/Down keys to move the OSD selection
Confirm: Use the Enter key to enter the next level of
OSD Move: Use the Up/Down keys to move the OSD Select
Exit: Use the Left key to exit the OSD
Confirm: Use the Enter key to enter the next level of
OSD Move: Use the Left/Up/Down keys to move the OSD Select Exit:
Use the Right key to exit the OSD
Machine Translated by Google

17
Confirm: Use the Enter key to exit the OSD to the previous OSD
Select: Use the Up/Down keys to adjust the OSD settings
Confirm: Use the Enter key to exit the OSD to the previous OSD
Select: Use the Left/Right keys to adjust the OSD settings
Select
Select
Enter
Enter
Machine Translated by Google

3) OSD lock/unlock function: To lock or unlock the OSD, press and hold the down button for 10 seconds when the OSD function is not active.
Basic and simple instructions on the control keys.
1) Press the Menu button to activate the OSD
window. 2) Follow the key guide to move or select (adjust) OSD settings.
Notice:
1) If the product only has a single signal input, the “Input Selection” item cannot be adjusted.
2) The three states of ECO mode (except standard mode), DCR and DCB mode can only display one state at a time.
18
Color Setup
Light FX
Audio
OSD Setup
Extra
Move Enter Exit Enter Exit Move
PIP Seÿng
PIP Seÿng
Audio Light FX
Machine Translated by Google