AOC e2460Swd User manual

Service Manual E2460Swd
1
AOC 显示器维修手册
Model: E2460Swd

Service Manual E2460Swd
2
Revision List
Version
Date
Revision History
TPV Model Name
A00
Jul-25-2012
Initial release
HKCAT76BBVA2DNJ
A01
Jan-15-2013
Add new models
TDCWUF2KBEE6HNJ
TDCWUF2YBGA1HNJ
TDCWUF2DBGA1HNZ
TDCKUF2DBGA1HNZ
TDCKUF2DBGA2HNZ
TDCWUF2DBGA1HNJ
TDCWUF2DBGA1H1Z
TDC2UF2DBGA1HNZ
TDCWUF2DBGA2HNZ
TDCWUF2DBGA1H2Z
TDCKB72KBEE6HNJ

Service Manual E2460Swd
3
CONTENTS
1. Monitor Specifications----------------------------------------------------------------------------------------- 4
1.1 Product Features ---------------------------------------------------------------------------------------------4
1.2 Factory Preset Mode----------------------------------------------------------------------------------------- 5
2. Setup----------------------------------------------------------------------------------------------------------------- 6
2.1 Contents in Box -----------------------------------------------------------------------------------------------6
2.2 Setup Stand & Base------------------------------------------------------------------------------------------7
2.3Adjusting Viewing Angle ------------------------------------------------------------------------------------7
2.4Connecting the Monitor -------------------------------------------------------------------------------------8
2.5Wall Mounting--------------------------------------------------------------------------------------------------9
3. Operation Instructions----------------------------------------------------------------------------------------- 10
3.1 Hotkeys----------------------------------------------------------------------------------------------------------10
3.2 OSD Setting----------------------------------------------------------------------------------------------------11
3.3 LED Indicator --------------------------------------------------------------------------------------------------21
4. Interface description ----------------------------------------- ------------------------------------------------- 22
4.1 D-Sub 15pin Interface ---------------------------------------------------------------------------------------22
4.2 DVI Interface---------------------------------------------------------------------------------------------------23
4.3 LVDS pin assignment----------------------------------------------------------------------------------------23
4.4 Plug and Play--------------------------------------------------------------------------------------------------23
5. Panel Feature ----------------------------------------------------------------------------------------------------- 24
5.1 General Features---------------------------------------------------------------------------------------------24
5.2 Absolute Max Ratings ---------------------------------------------------------------------------------------25
5.3 Electrical Characteristics -----------------------------------------------------------------------------------25
5.4 Panel Block Diagram ----------------------------------------------------------------------------------------26
5.5 OPTICAL CHARACTERISTICS --------------------------------------------------------------------------26
6. Block Diagram ---------------------------------------------------------------------------------------------------- 28
6.1 LCD Block Diagram------------------------------------------------------------------------------------------28
6.2 Main Board Block Diagram---------------------------------------------------------------------------------28
6.3 Power Board Block Diagram------------------------------------------------------------------------------- 29
6.4 Software Flow Chart ----------------------------------------------------------------------------------------30
7. Circuit Schematic------------------------------------------------------------------------------------------------ 31
7.1 Main board 715G5270M -------------------------------------------------------------------------------- 31
7.2 Power board 715G5361P --------------------------------------------------------------------------------37
7.3 Key board 715G5357K---------------------------------------------------------------------------------40
8. Monitor Exploded View---------------------------------------------------------------------------------------- 41
9. Maintainability ---------------------------------------------------------------------------------------------------- 42
9.1 Trouble Shooting---------------------------------------------------------------------------------------------- 42
9.2 Equipments and Tools Requirement---------------------------------------------------------------------46
9.3 Factory mode adjustment ----------------------------------------------------------------------------------47
9.4 Writing DDC program step --------------------------------------------------------------------------------- 48
10. BOM List------------------------------------------------------------------------------------------------------------ 50
10.1 TDCKB72KBEE6HNJ BOM------------------------------------------------------------------------------ 50

Service Manual E2460Swd
4
1. Monitor Specifications
1.1 Product Features
Panel
Model number
E2460SWD
Driving system
TFT Color LCD
Viewable Image Size
59.8cm diagonal
Pixel pitch
0.2715mm(H) x 0.2715mm(V)
Video
R, G, B Analog Interface
Separate Sync.
H/V TTL
Display Color
16.7M Colors
Dot Clock
165MHz
Resolution
Horizontal scan range
30 kHz –83 kHz
Horizontal scan Size(Maximum)
521.28mm
Vertical scan range
50 Hz - 76 Hz
Vertical scan Size(Maximum)
293.22mm
Optimal preset resolution
1920 x 1080 (60 Hz)
Plug & Play
VESA DDC2B/CI
Input Connector
D-Sub 15pin,DVI-D
Input Video Signal
Analog: 0.7Vp-p(standard),75 OHM, Positive& DVI-D
Digital Interface
Power Source
100-240V~ , 50/60Hz
Power Consumption
Active 25 W
Standby < 0.5 W
Off timer
0~24 hrs
Physical
Characteristics
Connector Type
15-pin Mini D-Sub DVI-D
Signal Cable Type
Detachable
Dimensions & Weight:
Height (with base)
411.55 mm
Width
565.4 mm
Depth
219.3 mm
Weight (monitor only)
4.07 kg
Environmental
Temperature:
Operating
0°to 40°
Non-Operating
-25°to 55°
Humidity:
Operating
10% to 85% (non-condensing)
Non-Operating
5% to 93% (non-condensing)
Altitude:
Operating
0~ 3658m (0~ 12000 ft )
Non-Operating
0~ 12192m (0~ 40000 ft )

Service Manual E2460Swd
5
1.2 Factory Preset Mode
STANDARD
RESOLUTION
HORIZONTAL
FREQUENCY(KHZ)
VERTICAL
FREQUENCY(KHZ)
VGA
640 X 480 @60Hz
31.469
59.940
640 X 480 @72Hz
37.861
72.809
640 X 480 @75Hz
37.500
75.000
SVGA
800 X 600 @56Hz
35.156
56.250
800 X 600 @60Hz
37.879
60.317
800 X 600 @72Hz
48.077
72.188
800 X 600 @75Hz
46.875
75.000
XGA
1024 X 768 @60Hz
48.363
60.004
1024 X 768 @70Hz
56.476
70.069
1024 X 768 @75Hz
60.023
75.029
SXGA
1280 X 1024 @60Hz
63.981
60.020
1280 X 1024 @75Hz
79.976
75.025
WXGA+
1440 X 900 @60Hz
55.935
59.887
1440 X 900 @60Hz
55.469
59.901
WSXGA
1680 X1050 @60Hz
65.290
59.954
HD
1920 X 1080 @60Hz
67.500
60.000
***
1280 X 720@60Hz
45.000
60.000
***
1280 X 960@60Hz
60.000
60.000
IBM-MODE DOS
720 X 400@70Hz
31.469
70.087
MAC-MODEVGA
640 X 480@67Hz
35
66.667
832 X 624@75Hz
49.725
74.5

Service Manual E2460Swd
6
2. Setup
2.1 Contents in Box
Note: Not all signal cables (HDMI cables) will be provided for all countries and regions. Please check
with the local dealer or AOC branch office for confirmation.

Service Manual E2460Swd
7
2.2 Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
Remove:
2.3 Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's
angle to your own preference.
Hold the stand so you will not topple the monitor when you change the monitor's angle.
You are able to adjust the monitor's angle from -5°to 20 °.

Service Manual E2460Swd
8
Note:Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD
screen
2.4 Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. Power
2. DVI cable
3. D-Sub cable

Service Manual E2460Swd
9
To protect equipment, always turn off the PC and LCD monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin DVI /D-Sub cable to the back of the monitor and connect the other end
to the computer's DVI /D-Sub port.
3. Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
2.5 Wall Mounting
Preparing to Install An Optional Wall MountingArm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before
this procedure. Follow these steps:
1. Remove the base.
2. Follow the manufacturer's instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in
the back of the monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for
instructions on attaching it to the wall.
Note: VESAmounting screw holes are not available for all models, please check with the dealer or official
department of AOC.

Service Manual E2460Swd
10
3. Operation Instructions
3.1 Hotkeys
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
Eco (DCR)
Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD.
(Eco mode hot key may not be available in all models).
4:3 or Wide
When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If the product screen size
is 4:3 or input signal resolution is wide format, the hot key is disable to adjust.)
Source/Auto/Exit
When the OSD is closed, press Source/Auto/Exit button will be auto configure hot key function. When the
OSD is closed, press Source/Auto/Exit button continuously about 3 second to do auto configure (Only for
the models with dual or more inputs).

Service Manual E2460Swd
11
3.2 OSD Setting
Basic and simple instruction on the control keys.
1) Press the MENU-button to activate the OSD window.
2) Press < or > to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it. Press < or > to navigate through the sub-menu functions. Once the desired
function is highlighted, press MENU-button to activate it.
3) Press < or > to change the settings of the selected function. Press AUTO to exit. If you want to
adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on. To un-lock the OSD - press and hold the
MENU button while the monitor is off and then press power button to turn the monitor on.
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is
disable to adjust.
3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off
accordingly.

Service Manual E2460Swd
12
Luminance
1. Press (Menu) to display menu.
2. Press < or > to select (Luminance), and press to enter.
3. Press < or > to select submenu, and press to enter.
4. Press < or > to adjust.

Service Manual E2460Swd
13
5. Press to exit.

Service Manual E2460Swd
14
Image Setup
1. Press (Menu) to display menu.
2. Press < or > to select (Image Setup), and press to enter.
3. Press < or > to select submenu, and press to enter.
4. Press < or > to adjust.

Service Manual E2460Swd
15
5. Press to exit.
Color Setup
1. Press (Menu) to display menu.
2. Press < or > to select (Color Setup), and press to enter.

Service Manual E2460Swd
16
3. Press < or > to select submenu, and press to enter.
4. Press < or > to adjust.
5. Press to exit.

Service Manual E2460Swd
17
Picture Boost
1. Press (Menu) to display menu.
2. Press < or > to select (Picture Boost), and press to enter.
3. Press < or > to select submenu, and press to enter.
4. Press < or > to adjust.
5. Press to exit.

Service Manual E2460Swd
18
OSD Setup
1. Press (Menu) to display menu.
2. Press < or > to select (OSD Setup), and press to enter.
3. Press < or > to select submenu, and press to enter.

Service Manual E2460Swd
19
4. Press < or > to adjust.
5. Press to exit.
Extra
1. Press (Menu) to display menu.
2. Press < or > to select (Extra), and press to enter.

Service Manual E2460Swd
20
3. Press < or > to select submenu, and press to enter.
4. Press < or > to adjust.
5. Press to exit.
Exit
1. Press (Menu) to display menu.