AOpen B2945 Assembly instructions


Copyright
Copyright of this publication belongs to AOpen Inc. AOpen reserves the
right to change the content of this publication without obligation to notify
any party of such changes or revisions. No part of this publication may be
reproduced, transcribed, transmitted, translated into any language, stored in
a retrieval system in any form or by any means electronically, mechanically,
optically without the prior written permission of this company.
Disclaimer
AOpen makes no warranties or representations, either expressed or implied,
with respect to the content herein and specically disclaims any warranties,
merchantability of tness for any particular purpose.
AOpen and AOpen logos used herein are registered trademarks of AOpen
Inc.All other brand names and trademarks are owned by their respective
owners.
Copyright © 2006 by AOpen Inc.
All rights reserved.
AOpen Inc.


Safety Precautions
Read and follow the content of the Safety Precautions carefully so that you
will not cause damages to yourself or the system.
1. Pay attention to the warnings and notes in this manual to avoid causing
unexpected damages.
2. If you want to wipe the system with a wet cloth, make sure the power
cord is disconnected. We strongly suggest not to wipe the system with
chemical detergent or sprayed detergent.
3. When moving the system, do not put the system on uneven, unsteady
or slanting surfaces.
4. Do not put water cups or beverages near the PC system to protect the
system from being damaged by liquids.
5. There are ventilating holes on the backboard of the computer case
to dissipate heat from the machine. You should pay attention to the
position of the PC so that the ventilating holes will not be blocked.
Meanwhile, don’t put your PC on something not sturdy enough – like
rug or bed mattress – to ensure smooth air ow for heat dissipation.
6. Before plugging on power, make certain the electric voltage in your
area complies with that of the PC. If you are uncertain, consult your PC
dealer or power company rst.
7. Do not place your PC on power cords. Do not leave the power lines in
tangles which may cause people to stumble.
8. It normally takes several power sockets to meet the need of a PC
system. Make sure the extension power line is capable of handling
the total power load for all equipment. In other words, the combined
amperage of all electrical appliances on the same extension line must
not exceed the strength of electric currents or the fuse of the extension
line.


9. When your PC system runs into problems, do not try to x it unless
you possess adequate technical know-how concerning hardware
installation and system maintenance. It would advisable to seek
assistance from qualified maintenance personnel so as to avoid
improper disassembling.
10. When encountering the following more dangerous situations,
unplug the power to shut down the system and then seek help from
professional technicians to x the problems:
10.1 When liquids nd their way into the equipment.
10.2 When the PC is soaked by rain.
10.3 When power cords or power sockets are damaged.
10.4 When the PC system falls to the ground and is damaged.
10.5 When some problems cannot be solved even after you
installed the system according to the manual or the
troubleshooting procedures.
Macrovision
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.


Disposal Instruction
For better protection of our earth, please don't throw this electronic device
into municipal trash bin when discarding. To minimize pollution and ensure
utmost protection of the global environment, please recycle the product.
For more information about the collection and recycling of Waste Electrical
and Electronic Equipment (WEEE), you are invited to visit our homepage
at www.aopen.com under “Green Products”.
Safety Instruction
Safety Caution Concerning Battery
Use the battery according to the manufacturer’s recommendation. When
replacing battery, use the battery which conforms to the manufacturer’
s specifications. When disposing the batteries, dispose the batteries to
a recycle center which is designated by your local authority to process
batteries. Follow all your local authority’s safety and waste disposal
regulations in disposing the batteries.
Safety Caution Concerning Laser Products
This equipment, built with DVD and/or CD disc drives using laser beam to
read or write data on optical discs, is classied as “Class 1 laser product”.
While the laser optical drive is reading data from or writing data to an
optical disc, do not force open the disc drive door. Press the Eject button to
retrieve the optical disc only after the in-use indicator goes off.


Content
Safety Precautions..................................................................................... 2
Disposal Instruction................................................................................... 4
Safety Instruction....................................................................................... 4
1. Hardware Installation......................................................................... 6
1.1 Unpacking Your System............................................................... 6
1.2 System Overview......................................................................... 8
1.2.1 Summary of Motherboard Features.............................................. 8
1.2.2 Summary of Audio Features......................................................... 8
1.2.3 Summary of General Input/Output Ports..................................... 8
1.3 Front View.................................................................................... 9
1.4 Rear View..................................................................................... 9
1.5 Get Ready for Installation............................................................ 10
1.6 Disassemble the System............................................................... 12
1.6.1 Remove Top Cover....................................................................... 12
1.6.2 Remove Hard Drive...................................................................... 15
1.6.3 Install HDD Drive........................................................................ 16
1.6.4 Install Memory Module................................................................ 16
1.6.5 Remove and Install Power Supply................................................ 17
1.6.6 Install CPU................................................................................... 17
2. BIOS Installation................................................................................. 19
2.1 Turn On the Power....................................................................... 19
2.2 Power Master................................................................................ 23
2.3 Jumper Setting.............................................................................. 26


1. Hardware Installation
1.1 Unpacking Your System
The system is designed for easy installation and operation. When you open
the package, you will see the following items:
01. The system unit
02. Slim type oppy disc drive or 7-in-1 card reader
(depending on the model selected)
03. Power cable
04. User’s Manual
05. A pack of screws
06. 80-pin at IDE cable
07. AOpen bonus pack CD
08. Riser Card
09. SATA Cable
Option (depending on the model selected):
*. Combo disc drive
*. Software for burning CD
*. Keyboard
*. Mouse
*. Remote control (supplied with TV tuner/video capture card)
*. Installation CD for TV tuner/video capture card
(supplied with TV tuner/video capture card)
*. Installation Guide for TV tuner/video capture card
(supplied with TV tuner/video capture card)
*. Video to YPbPr/S-Video/Composite connector
*. Warranty Card




1.2 System Overview
1.2.1 Summary of Motherboard Features
● The system is designed to support Intel pro
cessors under 115 W, 3xx/5xx/6xx/820/920/930
sequence.
● The system is built with two memory slots
supporting DDR2 667/533 memory modules.
The total system memory can be expanded to
2GB.
● Provides six USB 2.0 ports.
● Supports one slim-type exible disc drive or a 7-in-1
card reader. (depending on the model selected)
● Supports one PCI Express slot.
● Supports ATA100 and SATA II drives
● Supports automatic power recovery function
1.2.2 Summary of Audio Features
● Supports Azalia Codec on-Board (Realtek ALC880 support
7.1 Channel) which provides stereo sound effects
● Provides earphone output and microphone input on front
and rear panels
1.2.3 Summary of General Input/output Ports
● One Serial port
● Parallel/printer port
● One PS/2 keyboard port
● One PS/2 mouse port


1.3 Front View
1.4 Rear View
Note: The illustrations show installation and disassembly concepts and
processes, the specications and look of the chassis are subject to change
without prior notice.
Earphone / Mic-In
2 x USB 2.0
4-pin or 6-pin 1394
Slim Card Reader or FDD
Power Button w/ Power LED
ODD
ODD Eject Button
HDD LED
Voltage Slide Switch
Power Cord Connector
Gigabit LAN
Thermal Hole
D-SUBs
6-pin 1394
Com port
Riser Card (option)
- 1 x PCIe(x16)
- 1 x PCIe(x1) Low Prole
(Standard one comes with
only one low prole card slot)
8cm Fan w/ Noise Killer
HD Audio
2 x USB 2.0
D4 (option)
2 x USB 2.0
SPDIF Out
S-Video Out (option)
PS2 Keyboard/Mouse
Thermal Holes
Key Lock
- 1 x PCIe(x16)
- 1 x PCIe(x1) Low Prole
(Standard one comes with
only one low prole card slot)

0
1.5 Get Ready for Installation
Before building your PC, clear a good-size workspace. Open the
components pack. Follow these steps:
Step 1
Carefully select the workspace. Avoid places with heavy dusts, wet or
high temperature. Stay away from other electric equipment. Especially,
the electric source and connecting parts should have a distance from
other electrical appliances to avoid electromagnetic or wireless frequency
interference. This generally should not be a problem at home. But you
should pay special attention when building the PC in other places to stay
away from heating equipment, air conditioners, copy machines, TV sets,
and wireless broadcasting stations or antennas.
Step 2
Open the components pack and count all parts in the pack. Such information
is available at the front section of this manual and make sure all the listed
items are included. Carefully secure the pack because you will need the
pack to collect the items when you have to move the PC to a new place
in the future. In case there are items missing in the pack, contact your PC
dealer immediately to make up all components and accessories.
Step 3
Connecting parts and components: Connect all cables with respective
sockets and plug power cable into power source socket.
Caution: Make sure all wires and cables are connected before you connect
power cable and switch on power source.