APART MICPAT-2 User manual

MICPAT-2 MANUAL
1
Safety precaution
• Keep this manual for future reference.
• Take care of your connection wires; they should be free of damage. Damaged wires may
result in poor sound quality or malfunctions and can cause damage to the installation.
• Only use accessories specified by the manufacturer
• No mains power shall be connected to the device, doing so will damage the unit.
• This device should only be serviced by qualified personnel. If not serviced by qualified
personnel, warranty may be void.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Please check the packing for any kind of damage upon reception of the goods. If the packing
is damaged, please contact your dealer before opening it.
• Please note that this unit must be protected from moisture and is meant for indoor use only.
MICPAT-2
The Apart MICPAT-2 is a sturdy table type paging
microphone. It has a flexible gooseneck and a
high quality unidirectional dynamic microphone
capsule. With MICPAT-2 you can make paging calls
to maximum two zones simultaneously (zone 1
individual, zone 2 individual or both zones). A clear
LED indication for both the zones is integrated in
the solid microphone base. The aluminium base is
equipped with two push-to-talk switches.
WWW.APART-AUDIO.COM
Features and benefits
• Inconspicuous and elegant design
• Remarkable sound quality
• Flexible microphone stem
• Unidirectional dynamic microphone
• Speech-optimized frequency response
• 2 Push-to-talk buttons
• Balanced output allows long cables
• Easy connection
• No power supply or phantom power necessary
• Indoor use only

SELECTIVE PAGING MICROPHONE
2
Connecting the unit
Consult the manual of your master unit before connecting the microphone. MICPAT-2 has a 6 wire
connection and offers a balanced microphone level output and 2 separate paging contacts with
led indication.
WWW.APART-AUDIO.COM
1. red
2. white
3. yellow / shield
4. black
5. blue
5 pole euroblock connector microphone paging switches
1. red
2. white
3. shield
1. black
2. blue
3. yellow
+ - G Z1 Z2 + - G GZ1 Z2
1 2 3 4 5 1 2 3 1 2 3

MICPAT-2 MANUAL
3
Operating instructions
Push talk button 1, 2 or both to talk and
keep the switch(es) pushed in as long as
you talk.
Talk into the microphone at a distance of
5 to 20 cm, depending on the loudness
of your voice and the gain setting of the
connected preamplifier or mixing amplifier.
WWW.APART-AUDIO.COM
Frequency response

SELECTIVE PAGING MICROPHONE
4
Warranty info
Warranty claims and claims for hidden defects can
be considered only if the defects appear within the
warranty period of 24 months and are notified within
8 days following their appearance per registered letter.
The warranty is not valid in case of an incident, wear,
for moving parts, power surges, inadequate packing or
shipping, improper use or storage and the disregard of
recommendations of Apart Audio nv. The warranty only
concerns the spare parts and not the involved labor,
transportation or any other costs. The product must be
returned in the original packaging with the proof of
purchase by an Apart Audio authorized reseller.
The general terms and conditions can be found here:
http://www.apart-audio.com/conditions/General_Terms_and_Conditions_Apart_Audio.pdf
WWW.APART-AUDIO.COM
165 mm120 mm
50 mm
315 mm
polar pattern uni-directional
buttons 2 push to-talk
indicator 1 per button
zones 2
nominal output level 5 mV
frequency range 80 Hz - 12 kHz
rated output impedance 600 ohms
power supply no
cable length 5 m
cable type type 2 core + 2 core screened
connector open wire
width 120 mm
depth 165 mm
height 50 mm
mic stem length 315 mm
Net weight product 850 g