APEKX BE1032 User manual

IPX7 Waterproof, Wireless 5.0 Earbuds
Thank you for choosing the APEKX BE1032 Wireless Earbuds.
For any assistance, please contact our customer support team
or email us at [email protected].

1
Control Function
Press and hold the MFB of either earbud for
3 secs to power on (blink blue light 3 times)
Press and hold the MFB of either earbud for
4 secs to power off (blink red light 3 times)
Triple click the MFB while playing music
Double click the MFB of either earbud while playing
music
Click the MFB of either earbud once
Click the MFB of either earbud once
Double click the MFB of either earbud when there is
an incoming call.
Press and hold the MFB of either earbud for 2 secs

Note: When the earbuds cannot connect to your phone or cannot
connect back with the phone, please delete the previous connection
record in the phone list and turn off the wireless function, and then
power on the earbuds and pair with the device again.
● Plug the earbud along
the ear canal into the ear.
● Revolving the earbud till the end of
the ear hook is inserted behind the ear.
Verschleißmethode
2
How to pair earbuds with your phone
Remove the stickers .
Put both earbuds back intothe
charging case
.
BE1032
Bluetooth
Bluetooth
12:00
Settings
MY DEVICES
Connected
Step 2
Step 1 Step 3
Step 4
Take both earbuds out
from the charging case
.
Search and select
“BE1032”
.

Note: Earbuds will be charged
automatically when the charging
dock is charging.
3
When the charging case is full of
power, it can charge earbuds
about 4-5 times.
Full charging time:1.5H
Charge
Earbuds
=
=
Charging Case
Full charging time:1.5-2H
=
=
Waterproof for daily life(you cannot dip them into water), you
can wear them on when showering, swimming, washing face,
exposing in the rain, having a bath, but cannot dive.
Signal Transmission

4
Auto Power On/Off Earbuds
Function
Operation
Put both earbuds back
into the charging case，
earbuds will auto power off.
Take both earbuds out from the
charging case，earbuds will auto
power on and ready for pairing.
Left earbud indicator
flashes red&blue, right
earbud flashes blue only.
Keep in red light(means
earbuds are charging
successfully.)
LED
Indicators
Power OFF
Power ON
Note：If the charging case is completely discharged, earbuds will
not auto power on while taking them out from the charging case.
Support type: A2DP /AVRCP/HFP/HSP
Charging case input: 5V 550mA
Frequency range: 20Hz – 20,000Hz
Transmission distance: 10-15m(barrier free)
Earbuds battery: Rechargeable Li-battery 60mAh
Charging case battery: Li-battery 650mAh
Music play time: 6 hours(50% volume)
Specification