Apeman ID73 User manual

ID73
IP Camera
User Manual

1-22
23-44
45-66
67-88
89-110
111-132
Home Camera
Menu
English
Deutsch
Français
Italiano
Español
日本語

1
Warm prompt
Product information
Instructions for use of software
User registration/login
Add camera
Details of software function
Specifications
FAQ
Warranty
2
3
4
20
21
22
Contents

2
Warm prompt
Use this unit only for its intended use as described in this manual.
To avoid the risk of electric shock, do not disassemble or attempt to
repair the unit.
Never dispose of the product in fire or water, which may result in
explosion and/or injury.
Unplug this unit during lightning storms or when unused for long periods
of time.
The unit should be situated away from direct sunlight or heat sources
such as radiators, electric heaters, stoves, or other units that produce
heat. Avoid placing on top of stereo equipment that radiates heat.
Protect the adapter cord from being walked on or pinched, particularly
at plug outlets, convenience receptacles and the point where it exits the
unit.
Please make sure the camera is turned off before plugging in/out a
memory card to avoid memory card damage or data loss.
·
·
·
·
·
·
·

3
Product introduction
1. Photoresistor
2. Lens
3. Microphone
4. Infrared lamp
5. Power indicator
6. Reset button
7. SD card slot 
1
2
36
7
5
4

4
Instructions for use of software
IPC360 is an application software for the camera on mobile devices.
It supports both iOS and Android system. You can receive streaming
videos and remotely control the camera by using this software.
Scan the QR code below or search for “IPC360” in application store
to download the app in the latest version.
User registration/login
Download APP
or
IPC360
IPC360
Download

5
1
3
4
2
1.Registration
Once the APP is downloaded, you can register an account by using
your email.
Click “sign up” . Select the country or region your are in.
Enter your e-mail address and verification code received in the mail-
box and click Next;
Set your password and re-enter the password for confirmation. Click
Register to complete the registration.
Register, login and retrieve password
Experience
sign in
sign up Forgot password?
·
·
·

6
2.What if you forgot password
If you forget the password or the password is stolen, please modify
the password in time in “Forget Password” . 
Click Forget Password and select your country or region.
Enter your register email address. Click to get verification code,
obtain the verification code from your register email box and enter
the code;
Set a new password and re-input the new password for password
modification.
Log in by using the new password.
·
·
·
·
3.Login
Enter your register email and password. Click “ Sign in” for the next
step.

7
·
·
·
·
Warm tips:
Password format: 6 to 18 characters or numbers,
case-sensitive.
You can click “ ” in the password bar and select on/
off password in visual state.
The email address / mobile phone number must be
valid. Mobile phone number registration is only available
in China mainland.
An exclamation mark in the camera list indicates that the
current mobile phone number and the device are not
logged in on the same server. It is required to click Play
the Device, and the APP will automatically change the
server after confirmation by user, and the device can be
watched normally.

8
Add camera
Camera power startup
Supply the camera with power.
The power indicator (on the left side of the camera）turns red.
Camera makes horizontal and vertical rotation. Wait for around 15 to
20 seconds and camera will announce “camera’ s ready” . You need
to make sure the power indicator flashes in red and camera makes
a “Di-di” sound, which indicates that camera finishes power
start-up . If the indicator stays in green or does not blink in red,
please press the reset bottom for 5 seconds.
After camera finishing power start-up, it can be added by clicking
the [+] in the upper right corner of “My camera” . Please choose a
suitable network mode accordingly.
·
·
·
·
My camera
No camera,add by +

9
Wired connection
Using a network cable to make connection.
Select the “Wired mode” . Connect the camera and router with a
network cable. The LAN indicator will flash in orange. Make sure
that your phone and the camera is using the Wi-Fi came from a
same router. Click “next” .
App will search the camera automatically and display the Mac
address of the camera it found. Click into the Mac address to check
camera information and click “Add the camera” .
App starts to configure the camera. You will hear a “Ding-dong”
sound from camera and it will broadcast “Camera is ready”. The
indicator on camera flashes in green. You can name the camera and
enter next step.
Click “Try now” and the camera will make a panorama shot of taking
15 photos which create a long navigation picture. Each photo
bookmarks a position. Camera will turn to the bookmark position as
you tap on the navigation picture. Or you can skip it.
·
·
·
·

10
Wireless connection
Pair the camera with 2.4G Wi-Fi. ( Camera does not support 5G
band Wi-Fi. )
Click “Smart wireless mode” after making sure that you use Wi-Fi on
your phone and both the camera and your phone are in good network
condition. Click “Red light is blinking” after you hearing a “Di-di”
sound from the camera as red light blinking.
Enter your Wi-Fi password and click “Next”.
Choose your current location. Turn up phone volume to maximum and
place your phone near the camera. Click “Next”.
Your phone will make sound wave configuration with the camera by
emitting beeping sound. You will hear camera broadcast a
“ding-dong” sound and say “camera is ready”. The indicator flashes
in green. Camera is successfully added and you can name your
camera.
Click “Try now” and the camera will make a panorama shot of taking
15 photos which create a long navigation picture. Each photo
bookmarks a position. Camera will turn to the bookmark position as
you tap on the navigation picture. Or you can skip it.
·
·
·
·
·

11
·
·
·
·
·
Warm tips:
Camera currently supports 2.4GHz Wi-Fi network only. If
no 2.4GHz Wi-Fi network available, please try wired
connection.
Camera supports class 10 SD cards from 8G to 64G.
Please format SD card before use. Plugin or unplug a SD
card only before turning the camera on.
With a SD card inserted, you will have videos recorded
and saved on IPC360. If no SD card, you can click
“record video” icon to have video recorded on App
album .
Motion detection function is available only with SD card
inserted. Detection videos will be saved on IPC360.
The reset bottom is above the SD card slot. Press and
hold the reset bottom for around 3 to 5 seconds.
Release it until the camera makes two short beeping
sound to finish reset.

12
Details of software function
My camera
Access to panoramic navigation interface, and click “Try now” .
The camera will make a panorama shot of taking 15 photos
which create a long navigation picture. Each photo bookmarks a
position. Camera will turn to the bookmark position as you tap on
the navigation picture.
Click On/ Off to enable or disenable mobile detection and alert
notification.
Unbind the camera and the mobile phone.
Share the camera with other users by entering their IPC360
accounts.
Camera settings.
My camera
360°
:
:
:
:
:

13
Rename the camera (special symbol is invalid);
Share this camera with other users by entering their IPC360
accounts.
Choosing horizontal or reversed shooting angle.
A.
B.
C.
N
O
P
I
J
K
L
M
A
B
C
D
E
F
G
H
Restart camera
Refresh setting information
delete camera
Change router
Camera information
Memory card information
Firmware upgrade
Rename
Shared camera
Shooting angle
Indicator LED
Alert mode
Volume
Language&timezone
Encryption setting
Recording timing
Camera setting

14
Select to turn on or off LED indicator.
Enable/ Disenable detection and alert notification.
Turn on/off sound of “video on/off ” , “camera online” . Adjust
intercom, camera and microphone volume.
Select the broadcast language and time zone of the camera.
Choose custom encryption to set your streaming video password.
Then video can be viewed only after entering the password you
set. Choose default encryption then you won’ t need password to
access video feed.
Set recording time.
Change router. Reset camera and choose new network mode to
make connection.
Gain camera information.
Gain memory card information.
Make firmware update.
Restart the camera.
Refresh setting information.
Delete the camera.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.

15
Enter the camera--click the camera you want to select 
Vertical screen
The shooting angle of camera can be adjusted by sliding the
middle screen up and down and side to side.
Show date and time. You can playback video footage if a SD card
is inserted.
Hear the sound coming from the camera end.
Take snapshots and save them on App-Album.
Press and hold the icon to talk. Voice will be sent to the camera
end. Used with function C to make two-way audio.
Record video footage and save it on App album.
Select Definition—Low Definition (720P), High Definition (1080P)
and Adaptive Mode (automatically select the definition according
to the network speed) are optional.
12:0011:0010:0000:00 31/01
2018-01-23
RealTime
A
B
C D E F G
A.
B.
C.
D.
E.
F.
G.

16
Camera position correction function: the machine can rotate 360 °
for positioning and alignment.
Quick positioning-quickly adjust the camera angle by clicking
anywhere on the screen as the center point.
Shoot current screens, and view them in the Album.
Adjust the camera angle by sliding the screen up and down and
side to side (the horizontal and vertical directions can be also
adjusted by sliding the screen slantwise).
Horizontal screen
A D B C
A.
B.
C.
D.