Approx appLS15I Manual


1D Barcode Scanner Seng Manual V1.10
Table of Contents
Chapter1 System Sengs..........................................................................................................7
Introduction................................................................................................................................................7
Restore Defaults.........................................................................................................................................8
version........................................................................................................................................................8
Start off setting code..................................................................................................................................9
Programming Barcode Data.....................................................................................................................10
Reading mode selection...........................................................................................................................11
Decode sound settings..............................................................................................................................15
Increased/decreased sound.......................................................................................................................15
Sound fre uency.......................................................................................................................................15
Data transmit speed..................................................................................................................................16
Image recognition method........................................................................................................................17
Chapter1 Communicaon seng...........................................................................................18
Introduction..............................................................................................................................................18
USB-KBW Mode.....................................................................................................................................18
PS2 Keyboard Mode................................................................................................................................22
USB-COM................................................................................................................................................22
TTL/RS232 mode.....................................................................................................................................23
Chapter Data Eding.............................................................................................................25
Introduction..............................................................................................................................................25
Code ID Setting........................................................................................................................................26
Custom Prefix...........................................................................................................................................27
Clear all the prefix....................................................................................................................................28
Custom suffix...........................................................................................................................................29
Clear all suffixes.......................................................................................................................................30
Exit to set prefix and suffix......................................................................................................................31
Hidden characters.....................................................................................................................................32
Suffix setting............................................................................................................................................36
Character conversion................................................................................................................................37
Chapter4. Bar Code Parameter Sengs.................................................................................. 8
Introduction..............................................................................................................................................38
UPC-A......................................................................................................................................................38
UPC-E......................................................................................................................................................41
EAN-8......................................................................................................................................................44
EAN-13....................................................................................................................................................46
Code 128..................................................................................................................................................48
Code 39....................................................................................................................................................48
Code 93....................................................................................................................................................50
2 / 102

1D Barcode Scanner Seng Manual V1.10
Code 11....................................................................................................................................................51
Interleaved 2 of 5.....................................................................................................................................52
Matrix 2 of 5.............................................................................................................................................52
Industrial 2 of 5........................................................................................................................................53
Standard 2 of 5(IATA)..............................................................................................................................53
Codabar(NW-7)..................................................................................................................................54
Plessey......................................................................................................................................................55
MSI Plessey..............................................................................................................................................55
GS1 DataBar Limited(RSS Limited)..................................................................................................56
GS1 DataBar Omnidirectional(RSS Omnidirectional).......................................................................56
China Post(Datalogic 2 of 5)..............................................................................................................57
Add-on Code........................................................................................................................................58
Chapter5 Serial Communicaon Instrucon...........................................................................59
Instruction................................................................................................................................................59
Frame format structure.............................................................................................................................59
Instruction Parsing...................................................................................................................................60
Instruction save........................................................................................................................................61
Instruction Feedback Setting....................................................................................................................62
Sound Feedback Settings.........................................................................................................................62
Trigger instruction....................................................................................................................................63
Case Analysis...........................................................................................................................................63
Instruction sending example....................................................................................................................65
Chapter6 Appendix..................................................................................................................66
Appendix -Code ID................................................................................................................................70
Appendix - Instruction Set.......................................................................................................................71
Appendix - Character Table (for adding suffixes)......................................................................88
Appendix - ASCII code table............................................................................................................95
3 / 102

1D Barcode Scanner Seng Manual V1.10
Chapter1 System Sengs
The user can set the function of the barcode reader by scanning one or more setting
barcodes。
Scanning Instructions
In the Trigger ode, the scanning barcode operation steps are as follows
1. Hold down the trigger key of the barcode reader, the line of sight is activated, red red
line of sight appears。
2. Align the red line of sight with the bar code center, move the bar code reader and adjust
the distance between it and the bar code to find the best reading distance。
3. After hearing the successful prompt sound, and the red lighting line is extinguished, the
reading is successful, and the barcode reader transmits the decoded data to the host.。
Note: During the reading process, you will find the distance between the barcode
reader and the barcode within a certain range for the barcode of the same batch, and
the reading success rate will be very high. This distance is the best reading distance.
4 / 102

1D Barcode Scanner Seng Manual V1.10
All barcode readers have a factory default setting. Reading the "Restore default
settings" barcode will restore all barcode reader property settings to the factory state.
You are most likely to use this bar code in the following situations:
1、Error in barcode reader settings, such as barcode not recognized.
2、You have forgotten what settings were made for the barcode reader before, and you
do not want to use the previous settings。
3、The bar code reader is set to use some infrequently used features and is used after
completion。
000B0
Restore default settings
Use the scanner to scan the version number bar code, you can view the current bar coder
version number information
000A0
version
5 / 102

1D Barcode Scanner Seng Manual V1.10
The setting code can be turned off. When the barcode reader is set to “Enter Setup”, the
setup function will work when the setup code is scanned. When the barcode reader is set
to “Exit Setup”, the scanner engine will scan the setup code. There will be an error tone,
the setting function will not work, the default is "Enter Setup".
09990
Enter Setup*
09991
Exit Setup
6 / 102

1D Barcode Scanner Seng Manual V1.10
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode
below to enable or disable the transmission of programming barcode data (i.e. the
characters under programming barcode) to the Host.Default is setting code not send.
02501
Transmit Programming Barcode Data
02500
Not Transmit Programming Barcode Data *
7 / 102

1D Barcode Scanner Seng Manual V1.10
Trigger ode
The user can set the reading mode of the barcode reader according to the needs. The
default state is the Trigger ode. In this mode, the barcode reader starts reading after
pressing the trigger button, and the barcode reader stops reading after successfully
reading or unlocking the trigger button.
013300
Trigger ode*
Continuous scanning mode
After the setting is completed, the red light is in a long light state. When a bar code
passes through, the bar code reader automatically reads the bar code. The same
barcode cannot be read repeatedly unless it is removed again.
013304
Continuous scanning mode
8 / 102

1D Barcode Scanner Seng Manual V1.10
Sense ode
After the setting is completed, there is no need to trigger, and the barcode reader
starts detecting the change of the environment before the window. After the reading is
complete, it stops and is in the monitoring state waiting for the next environmental
change. In this mode, clicking the trigger button can also start reading.
02311
Turn on Sense ode
02310
Turn off Sense ode*
Note: When using this mode, it needs to be switched by Trigger ode.
9 / 102

1D Barcode Scanner Seng Manual V1.10
Flashing mode (Press key to turn on)
After the setting is completed, the scanning needs to be triggered manually, the red
light of the barcode reader is blinking, and the barcode reader starts to detect the
change of the environment before the window is opened. After the reading is
completed, the red light is on for 3 seconds. After 3 seconds, the bar code is not
automatically read into the flashing state. Pressing the button in this state can turn the
bar code reader on or off at any time.
013306
Flashing mode (Press key to turn on)
Flashing mode (Press key to turn off)
After setting, there is no need to trigger manually. The red light of the barcode reader
is blinking, and the barcode reader begins to detect the change of the environment
before the window. After the reading is completed, the red light is on for 3 seconds.
After 3 seconds, the bar code is not read and the flashing state is automatically
entered. In this state, the key does not work.
013305
Flashing mode (Press key to turn off)
10 / 102

1D Barcode Scanner Seng Manual V1.10
Press Key to delay single read mode
After the setting is completed, press the trigger button, the red light of the barcode
reader will be on for 3 seconds, and the unread code light will be extinguished for 3
seconds after the timeout, or the light will be off after the reading is completed. The
key will not work before the light goes out. The default time of the button timeout is 3
seconds. Can be set for 1-15 seconds.
013301
Press key to delay single read mode
023510
1 second timeout
023530
3second timeout*
0235A0
10 second timeout
0235F0
15 second timeout
11 / 102

1D Barcode Scanner Seng Manual V1.10
The barcode reader will have a roar tone after successfully reading the barcode. Users can
Disable or Enable the roar tone according to the demand. The default is to enable
decoding sound.
014201
Enable decoding sound*
014200
Disable decoding sound
014300
Increased sound
014301
Reduced sound
0145800
2.0KHZ*
0145AAA
2.7KHZ
12 / 102

1D Barcode Scanner Seng Manual V1.10
The barcode reader supports the adjustment of data transmit speed. For non-standard
USB input used by some WINDOWS devices, for example, the PS2 converted USB interface
can reduce the data transfer security and integrity by appropriately reducing the barcode
transmit speed. USB fast transfer is disabled by default, and use "moderate transmit
speed" mode.
02301
Enalbe USB fast transfer
02300
Disable USB fast transmit*
The user can set the transmit speed to further set the transmit speed of the USB device.
001500
Fast transmit
001502
oderate transmit speed*
001504
Slow transmit
001506
The slowest transmit speed
13 / 102

1D Barcode Scanner Seng Manual V1.10
The barcode reader supports the recognition of reverse-colored images (anti-white bar
codes). The user can set whether or not the image needs to be reversed according to the
requirements. The default is forward image recognition。
00161
Forward image recognition*
00160
Reverse image recognition
14 / 102

1D Barcode Scanner Seng Manual V1.10
Chapter1 Communicaon seng
When using this barcode to communicate with different hosts, you need to set the
barcode reader to the corresponding communication interface mode.
The user can set the barcode scanner function by scanning one or more setting barcodes.
Users can choose to use USB-KBW, USB-CO , PS2,TTL / RS232 serial communication
interface mode.
!
By default, the barcode reader uses USB-KBW communication to simulate the USB
keyboard input mode without installing a driver.
000602
USB-KBW*
15 / 102

1D Barcode Scanner Seng Manual V1.10
Country/language keyboard layout selection
Different national languages correspond to the keyboard keys arrangement, symbols, etc.
are different, the barcode scanner can be virtual according to the actual needs of different
countries keyboard.
0005000
USA/China(English)*
0005001
Canada(French)
0005002
Netherlands (Dutch)
0005003
Spain (Spanish - International)
0005004
Argentina (Latin American)
0005005
Brazil (Portuguese)
0005006
Denmark (Danish)
0005007
United Kingdom (British English)
0005008 0005009
16 / 102

1D Barcode Scanner Seng Manual V1.10
Italy (Italian) France (French)
17 / 102

1D Barcode Scanner Seng Manual V1.10
0005010
Germany (Slang)
0005011
Norway (North Sami)
0005012
Sweden/Finland (Swedish/Finnish)
0005013
Slovak (Slovak)
0005014
Portugal (Portuguese)
0005015
Czech Republic (Czech)
0005016
Belgium (Dutch)
0005017
Turkish-F
0005018
Turkish-Q
0005019
Poland (Polish 214)
0005020 0005021
18 / 102

1D Barcode Scanner Seng Manual V1.10
Switzerland (German/French) Croatian (Croatian)
19 / 102

1D Barcode Scanner Seng Manual V1.10
0005022
Hungary (Hungarian)
0005023
Japan (Japanese)
0005024
Russia (Russian)
20 / 102
Table of contents
Other Approx Barcode Reader manuals