APRAMO ONE User manual

www.apramo.com
0 - 36KG
APRAMO® ONETM
CHILD CAR SEAT

Thank you for purchasing the APRAMO® ONE
TM seat,
if you have any questions regarding the installation
and use of this seat, or require spare parts or
accessories, please contact our Customer Services
Department.
Please take time to read this instruction manual and
familiarise yourself with the seat before use.
CONTENTS
1. Important Information
2. Installation Notes
3. Preparing the APRAMO® ONE TM
before Use
3.1 ISOFIX setup
3.2 Harness and headrest adjustment for Group 0+, I & II
3.3 Headrest adjustment for Group II & III
3.4 Recline function
3.5 360° rotation function
4. Rearward Facing Installation
4.1 Group 0+ (0 - 13 KG approx.)
with 5-point harness + ISOFIX + Top tether
4.2 Group 0+ (0 - 13 KG approx.)
with 5-point harness + vehicle belt
5. Forward Facing Installation
5.1 Group I (9 - 18 KG approx.)
5.1.1 With 5-point harness + ISOFIX + Top tether
5.1.2 With 5-point harness + vehicle belt
5.2 Group II (15 - 25 KG approx.)
with 5-point harness + vehicle belt + Top tether
5.3 Group II & III (15 - 36 KG approx.)
with vehicle belt
6. Removing the APRAMO® ONE TM
from the Vehicle
7. Removing the 5-Point Harness
8. Installing the 5-Point Harness
9. Care and Maintenance
9.1 Harness buckle maintenance
9.2 Cleaning the car seat covers
9.3 Internal cushion of seat cover
01
05-08
08-12
13
13-14
14-15
16
17-20
02
03-04
..........................
...........
.............
.........
...........
...........................
..........................
....................................
..................................
........................................
10. Applicable Car List

1. This child seat is suitable for children up to 36KG, (Group 0+, I, II & III – from birth to approximately 12 years of age).
2. Please follow the instructions in this manual carefully, failure to follow the instructions may affect your child’s safety.
3. This seat is suitable for use in vehicles fitted with a 3-point retractable safety belt approved to ECE R16 or equivalent. Can also be
used with ISOFIX.
4. Never use this seat without the covers supplied. Do not replace the cover with any, other than those recommended by the
manufacturer as this may affect the safe use and performance of the seat.
5. Parts of this seat may become hot in warm weather. Shade your vehicle and the car seat from sunlight to avoid causing injury to
your child.
6. The car seat may incur wear and tear over several years use, if you require replacement parts, please contact our customer
service department.
7. Ensure that any loose articles are secured in the vehicle as these may present a hazard in the event of an accident.
8. Ensure that the seat is installed so that, under normal vehicle usage conditions, no part can become jammed under, or between
any moveable seats, or in the vehicle door.
9. Do not modify, or add to the car seat in any way without the approval of a competent authority, or the manufacturer, as this will
void any warranty and may affect safety and performance.
10. Always ensure that the seat is securely fastened, even when unoccupied, a loose seat can cause injuries in the event of a collision.
11. Never leave your child unattended in the car seat.
12. Never use bleach, or other toxic cleaning fluids as these can cause illness.
13. Always replace any car seat that has been involved in an accident, however minor, as unseen damage may have occurred.
14. Do not use this car seat on a passenger seat fitted with a frontal airbag.
15. The illustrations in this manual are for reference only, and may differ slightly from your seat model.
1. Important Information
01

2. Installation Notes
Only suitable for
seats with a
3-point vehicle
belt.
NEVER USE WITH A 2-POINT LAP BELT.
A I R B A G
NEVER USE ON A PASSENGER SEAT WITH A FRONTAL AIRBAG.
DO NOT USE FORWARD FACING BEFORE THE CHILD’S
WEIGHT EXCEEDS 9KG.
W A R N I N G
W A R N I N G
W A R N I N G
GROUP 0+ (0 - 13KG APPROX.) GROUP I, II & III (9 - 36KG APPROX.)
This seat uses two fitting methods:
ISOFIX SYSTEM AND TOP TETHER WHICH IS SUITABLE FOR
GROUP 0+ & I (0 - 18KG APPROX.).
3-POINT VEHICLE BELT WHICH IS SUITABLE FOR
GROUP 0+, I, II & III (0 - 36KG APPROX.).
Can not be used
in the passenger
seat with the
airbag activated.
CLASS B1, E
02

3. Preparing the
APRAMO® ONE TM before Use
3.1 ISOFIX Setup
1. If your vehicle does not have ISOFIX guide socket, please
insert the guide socket (02) into the ISOFIX anchor (01). (fig. 1)
TIP: ISOFIX anchors are located between the backrest
and the seat cushion of your vehicle.
2. Pull the ISOFIX strap loop (03) out as far as it will go. (fig. 2)
1
3.2 Harness and headrest adjustment for Group 0+, I & II
(Group II can be used with 5-point harness)
1. Press down on the central adjuster, and pull the shoulder
straps towards you (05) (Do not pull on the shoulder pads
(06)), extending the 5-point harness as far as it will go. (fig. 3)
2. Pull upwards on the adjusting ring (07), whilst pulling up, or
pushing down the headrest to the required position (08).
The headrest (08) should be positioned so that the shoulder
straps fit level with the child’s shoulders. (fig. 5)
CAUTION: The shoulder straps (05) must be correctly
positioned as shown in fig. 5.
Adjust the headrest (08) correctly to protect the child safely.
The height of headrest (08) is to make the shoulder belts (05)
to be same level with the shoulder of child. (fig. 5)
CAUTION: The shoulder belts (05) must not run behind the
back of the child or at ear height or above the ears.
07
08
4
5
08
05
2
03
04
06
05
3
03

3.3 Headrest adjustment for Group II & III
1. Using the release handle (09), adjust the headrest (08) up or
down as required, then release the handle and the headrest
will lock into place automatically. (fig. 6)
2. If required, the headrest (08) can be further adjusted by
using the adjusting ring (07), please refer to section 3.2 for
details.
3. The headrest (08) is in the correct position when the
diagonal portion of the vehicle seatbelt (10) sits on the child’s
shoulders, a gap of about 2 fingers width between the child’s
shoulders and the lowest edge of the headrest. (fig. 7)
3.4 Recline function
1. Using the release mechanism (11), adjust the seat (12) to
the desired position then release the mechanism and the
seat will lock into place automatically. (fig. 8)
3.5 360° rotation function
1. Press the release button (13) to release the seat (12), and
then rotate the seat to the desired position. Release the
release button (13) to lock the seat (12) into place automatically.
(fig. 9)
CAUTION: The child seat can only be used in forward or
rearward facing position when travelling. Always ensure that
the rotating part of the child seat is fully engaged by trying to
turn the seat (12) around in both directions.
6
07
08
09
CAUTION: Please adjust the seat as fullest recline position
when rearward facing is in use for the child. The fullest
recline position of the seat is that the triangular sign on
seat body will match with the groove on the red belt guide.
8
11
12
9
13 12
04
FULLRECLINE
REARWARD
GR.0+

4.1.8 Push the seat back until it is in contact with the backrest
of the vehicle seat. (fig. 12)
4.1.9 Depress the release button of the Top tether adjuster to
release the strap. (fig. 13)
4. Rearward Facing Installation
13
4.1 Group 0+ (0 - 13 KG approx.)
with 5-point harness + ISOFIX + Top tether
4.1.1 Prepare the ISOFIX. (See section 3.1)
4.1.2 Ensure that the 5-point harness is correctly installed.
(Refer to section 8)
4.1.3 Ensure that the 5-point harness is correctly adjusted.
(Refer to section 3.2)
4.1.4 Adjust the seat to the fullest recline position (See section
3.4) and ensure that the recline mechanism is securely
locked.
4.1.5 Rotate the seat to the rearward facing position (See
section 3.5) and ensure that the rotation mechanism is
securely locked.
4.1.6 Place the child car seat on the vehicle seat facing the rear
of the vehicle against the direction of travel. (fig. 10)
4.1.7 Insert the ISOFIX connectors (15) into the guide socket (02)
until an audible click is heard and the indicators (16) are
green. (fig. 10, 11)
CAUTION: The ISOFIX connectors (15) are secured
only when both indicators (16) are completely green. 4.1.10 Insert the Top tether strap into the lock-off pics (17).
(fig. 14)
4.1.11 Hook the snap hook (18) onto the Top tether anchorage
point in your vehicle. To find this, look for this sign in your
vehicle, or check in your vehicle handbook, or with your
vehicle dealer.
05

4.1.12 Pull on the free end of the Top tether strap until the
indicator shows green. (fig. 16)
4.1.13 Follow the steps in section 4.1.14 to secure your child in
the seat with the 5-point harness.
4.1.14 Using the 5-point harness
1. Depress the red button (19) to release the buckle and press
the central adjuster (04) to pull out the shoulder straps (05)
(Do not pull on the shoulder pads(06)). (fig. 17)
2. Place your child in the seat.
3. Ensure that your child's back is lying flat against the backrest
of the car seat.
16
04
05
06
19
17
4. Guide the two buckle latches together (20) and insert into
the buckle (19) There will be an audible click when the buckle
is secured. (fig. 18, 19, 20)
5. Pull outwards on the adjuster strap (21) until the harness is
snug against your child's body. Ensure that the harness
straps are not twisted at any point. (fig. 21, 22)
22
06
21
21
20
06
05
19
19
18
20
For your child’s safety, ensure that the following checks are
carried out before every journey:
• The ISOFIX connectors are securely engaged in the anchors
and the indicators are both completely green.
• The child seat is placed up against the backrest of the
vehicle seat.
• The Top tether strap is tight and the indicator is green.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
06

4.2 Group 0+ (0 - 13 KG approx.)
with 5-point harness + vehicle belt
4.2.1 Ensure that the 5-point harness is correctly installed.
(Refer to section 8)
4.2.2 Ensure that the 5-point harness is correctly adjusted.
(Refer to section 3.2)
4.2.3 Adjust the seat to the fullest recline position (See section
3.4) and ensure that the recline mechanism is securely
locked.
4.2.4 Rotate the seat to the rearward facing position (See
section 3.5) and ensure that the rotation mechanism is
securely locked.
4.2.5 Place the child car seat on the vehicle seat facing the rear
of the vehicle (Against the direction of travel). (fig. 23)
4.2.6 Pull out the vehicle seat belt as much as possible, and
then insert the lap portion of the seatbelt through the belt
guides on the base of the seat (22). Fasten the vehicle
seat belt buckle (23) and pull to remove any slack from
the belt webbing. (fig. 24)
4.2.9 Using the 5-point harness
1. Depress the red button (19) to release the buckle, and
press the central adjuster (04) to pull out the shoulder
straps (05) (Do not pull on the shoulder pads (06)). (fig. 17)
2. Place your child in the seat.
3. Ensure that your child’s back is lying flat against the backrest
of the seat.
4. Guide the two buckle latches (20) together and insert into
the buckle (19) There will be an audible click when the buckle
is secured. (fig. 18, 19, 20)
5. Pull outwards on the adjustor strap (21) until the harness is
snug against your child’s body. Ensure that the harness straps
are not twisted at any point. (fig. 21, 22)
4.2.7 Pass the diagonal portion of the vehicle seatbelt through
the 2 belt guide rings in the belt lock-off pics (17). (fig. 25)
4.2.8 Pull the seat belt webbing upwards as far as possible to
remove any slack, ensuring that no part of the vehicle
seatbelt is twisted, and close up the belt lock-off. (fig. 26)
07

For your child’s safety, ensure that the following checks are
carried out before every journey:
• The vehicle belt is passed through both of the belt guide
rings.
• The vehicle seat belt is taut, remove any slack if necessary
and is not twisted.
• The seat is placed up against the back of the vehicle seat,
without a gap.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
5. Forward Facing Installaon
5.1 Group I (9 - 18 KG approx.)
5.1.1 With 5-point harness + ISOFIX + Top tether
1. Set up the ISOFIX fittings. (See section 3.1)
2. Ensure that the 5-point harness is correctly installed. (Refer
to section 8)
3. Ensure that the 5-point harness is correctly adjusted. (Refer
to section 3.2)
4. Adjust the seat to the desired recline position (See section
3.4) and ensure that the recline mechanism is securely locked.
5. Rotate the seat to the forward facing position (See section
3.5) and ensure that the rotation mechanism is securely locked.
6. Place the child car seat on the vehicle seat facing the front
of the vehicle (In the direction of travel). (fig. 27)
08

For your child’s safety, ensure that the following checks are
carried out before every journey:
• The ISOFIX connectors are securely engaged in the anchors
and the indicators are both completely green.
• The child seat is sitting flat against the backrest of the
vehicle seat.
• The Top tether strap is tight and the indicator is green.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
7. Insert the ISOFIX connectors (15) into the guide socket (02)
until an audible click is heard and the indicators (16) are
green. (fig. 27, 28)
CAUTION: The ISOFIX connectors (15) are secured
only when both indicators (16) are completely green.
32
8. Push the seat back until it is flat against the backrest of the
vehicle seat, if necessary, remove the vehicle headrest to
achieve this. (fig. 29)
9. Depress the release button of the Top tether adjuster to
release the strap. (fig. 30)
10. Hook the snap hook (18) onto the Top tether anchorage
point in your vehicle. To find this, look for this sign in
your vehicle, or check in your vehicle handbook, or with
your vehicle dealer. (fig. 31)
11. Pull on the free end of the Top tether strap tightly until the
indicator shows green. (fig. 32)
12. Follow the steps shown in section 4.1.14 to secure your
child with the 5-point harness.
30
31
18
09

For your child’s safety, ensure that the following checks are
carried out before every journey:
• The vehicle belt is passed through both of the belt guide
rings.
• The vehicle seat belt is taut, remove any slack if necessary
and is not twisted.
• The seat is placed up against the back of the vehicle seat,
without a gap.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the child’s
shoulders.
• The harness buckle is properly secured.
5.1.2 With 5-point harness + vehicle belt
1. Ensure that the 5-point harness is correctly installed.
(Refer to section 8)
2. Ensure that the 5-point harness is correctly adjusted.
(Refer to section 3.2)
3. Adjust the seat to the desired recline position (See section
3.4) and ensure that the recline mechanism is securely locked.
4. Rotate the seat to the forward facing position (See section
3.5) and ensure that the rotation mechanism is securely
locked.
5. Place the child car seat on the vehicle seat facing the front
of the vehicle (In the direction of travel). (fig. 33)
6. Pull out the vehicle seat belt as much as possible, and then
insert the lap portion of the seatbelt through the belt guides
on the base of the seat (22). Fasten the vehicle seat belt
buckle (23) and pull to remove any slack from the belt
webbing. (fig. 34)
7. Pass the diagonal portion of the vehicle seatbelt through
the 2 belt guide rings (17). (fig. 35)
8. Pull the seat belt webbing upwards as far as possible to
remove any slack, ensuring that no part of the vehicle
seatbelt is twisted, and close up the belt lock-off. (fig. 36)
9. Follow the steps shown in section 4.2.10 to secure your child
with the 5-point harness.
10

5.2 Group II (15 - 25 KG approx.)
with 5-point harness + vehicle belt + Top tether
1. Follow the steps shown in section 5.1.2 to install the seat
using the vehicle seatbelt.
2. Depress the release button of the Top tether adjuster to
release the strap. (fig. 37)
3. Hook the snap hook (18) onto the Top tether anchorage
point in your vehicle. To find this, look for this sign in
your vehicle, or check in your vehicle handbook, or with your
vehicle dealer. (fig. 38)
4. Pull on the free end of the Top tether strap tightly until the
indicator shows green. (fig. 39)
5. Follow the steps shown in section 4.2.10 to secure your child
with the 5-point harness.
5.3 Group II & III (15 - 36 KG approx.)
with vehicle belt
1. Ensure that the 5-point harness has been removed correctly.
(See section 7)
2. Adjust the headrest to the correct position. ( See section 3.3)
3. Adjust the seat to the desired recline position (See section
3.4) and ensure that the recline mechanism is securely locked.
4. Rotate the seat to the forward facing position (See section 3.5)
and ensure that the rotation mechanism is securely locked.
5. Place the child car seat on the vehicle seat facing the front of
the vehicle (In the direction of travel) and place the child in
the car seat.
6. Pull out the vehicle seat belt as far as possible and pass it
around the front of the child, and secure the buckle (24) ( An
audible click will be heard). (fig. 40)
CAUTION: Ensure that the seatbelt is not twisted at any
point.
7. Pass the diagonal portion of the seatbelt (25) and the lap belt
portion (26) on the same side as the vehicle seat buckle(24)
under the armrest and through the red belt guide gap (27).
(fig. 41)
39
38
18
37
For your child’s safety, ensure that the following checks
are carried out before every journey:
• The vehicle belt is passed through both of the belt
guide rings.
• The vehicle seat belt is taut, remove any slack if
necessary and is not twisted.
• The seat is placed up against the back of the vehicle
seat, without a gap.
• The Top tether strap is tight and the indicator is green.
• The 5-point harness is fitted snugly to the child.
• The shoulder straps are not twisted.
• The shoulder straps sit in the correct position on the
child’s shoulders.
• The harness buckle is properly secured.
11

For your child’s safety, ensure that the following checks
are carried out before every journey:
• The diagonal portion of the vehicle belt (25) and the lap
belt portion (26) on the side of the vehicle seat buckle (24)
is passed through the red belt guide (27).
• The lap belt portion (26) on the opposite side to the
vehicle seat buckle is passed through the red belt guide (28).
• The diagonal portion of the vehicle seatbelt (29) is passed
through the red belt guide (30) of the headrest (08).
• The diagonal portion of the vehicle seatbelt sits over the
child’s collar bone and not in front of their neck.
• The vehicle seat belt is tight and not twisted at any point.
8. Place the lap belt portion of the seatbelt on the opposite side
to the vehicle seat buckle through the red belt guide. (28)
(fig. 42)
9. Guide the diagonal portion of the vehicle seatbelt (29)
through the red belt guide (30) of the headrest (08), ensuring
that the vehicle seatbelt is not twisted at any point.
10. Ensure that the diagonal portion of the vehicle seatbelt sits
over the child’s collar bone and not in front of their neck
(fig. 43)
TIP: If necessary, adjust the headrest to ensure that
the seatbelt is sitting correctly on the child’s shoulder.
12

1. Push back both of the ISOFIX release buttons to release the
ISOFIX connectors.
2. Undo the vehicle seat belt buckle, and remove the vehicle
seatbelt from the belt guide rings (17) and the lower guides
(22).
3. Depress the release button of the Top tether strap to release
the strap and unhook from the vehicle anchorage point.
4. Push the ISOFIX connectors back into the base of the child
car seat.
1. Press down on the central adjuster (04), and pull the shoulder
straps towards you (05) (Do not pull on the shoulder pads
(06)), extending the 5-point harness as far as it will go. (fig. 44)
2. Pull the adjusting ring (07) upwards, whilst pushing the
headrest (08) downwards to its lowest position. (fig. 45)
3. Turn the car seat around so that the rear is facing you.
4. Unlatch the rear cover (32) by using the cover latch (31). (fig. 46)
5. Remove the webbing from the joint plate (33). (fig. 47)
6. Place the joint plate (33) in the recess (34) in the cover. (fig. 48)
7. Remove the loops of the shoulder pads (35) from the headrest
lever (36). (fig. 49)
8. Close the rear cover (32).
6. Removing the
APRAMO® ONE TM from
the Vehicle
7. Removing the 5-Point Harness
13

12. Open the cover (39) , place the buckle latches in the storage
(38) on each side, then replace the cover (39). (fig. 52)
13. Turn the metal plate (40) so that it is vertical, and remove
from the housing (41). Remove the 5-point buckle. (fig. 53)
9. Turn the car seat around so that the front is facing you.
10. Pull out the shoulder straps (05) and shoulder pads (06)
from the harness slots (37). (fig. 50)
11. Open the buckle (19) of the 5-point harness. (fig. 51)
49
36
35
48
33 34
41
40
53
8. Installing the 5-Point Harness
1. Place the buckle (19) into the crotch pad (43). (fig. 54)
2. Turn the metal plate (40) so that it is vertical and insert in the
housing (41). Use slot A for Group 0+ & I and slot B for Group II.
(fig. 54)
3. Open the cover (39), take the buckle latches out of the storage
on each side (38), and then refasten the cover. (fig. 55)
40
54
A
B
41
19
43
52
39
38
55
38
39
14

6. Thread both of the shoulder pads (06) onto the shoulder
straps (05). (fig. 58)
7. Thread the loops of both the shoulder straps (05) and the
shoulder pads (06) through the harness slots (37) The loop of
the shoulder pad should be beneath the loop of the shoulder
strap. (fig. 59)
Turn the car seat around so that the rear is facing you.
4. Bring the 2 latches of the buckle (44) into the buckle (19).
(fig. 56)
CAUTION: Ensure that the straps are not twisted at
any point.
5. Pull the adjusting ring (07) upwards, whilst pushing the
headrest (08) downwards to its lowest position. (fig. 57)
56
19
44
58
06
05
59
37
06
05
8. Unlatch the rear cover (32) by using the cover latch (31).
(fig. 60)
9. Fix the loops of the shoulder pads (35) on the headrest lever
(36). (fig. 61)
10. Remove the joint plate (33) from the recess (34) in the
cover. (fig. 62)
11. Place the webbing loops of the shoulder straps (42) over
the joint plate(33). (fig. 63)
CAUTION: Ensure that the straps are not twisted at any point.
12. Close the rear cover (32).
33 34
62
61
35
36
63
42
33
57
07
08
09
31
32
60
15

9.1 Harness buckle maintenance
Buckle failure can cause injury; do not use any oil or other
lubricants on any part of the buckle. Buckle malfunctions are
usually caused by a build-up of debris such as food crumbs or
other small particles.
Signs of buckle malfunction:
• The buckle latches are slow to release when the red release
button is depressed.
• The buckle latches will not lock into the buckle securely.
• The buckle latches engage without an audible click.
• The buckle latches are difficult to insert (Any resistance is felt).
• The buckle opens only when extreme force is applied.
To clean the harness buckle
1. Follow steps shown in section 7 to remove the buckle from
the seat. (figs. 51, 53)
2. Soak the harness buckle in warm water with mild washing up
liquid only for at least an hour. Rinse and allow to air dry
thoroughly before replacing the buckle on the seat. (fig. 64)
9. Care and Maintenance
51
19
40
41
40
53 64
9.2 Cleaning the car seat covers
The seat covers are removable and washable, please refer
to the fabric care label on the seat cover for full instructions.
To remove the seat covers
1. Adjust the headrest to the highest position. (fig. 65)
2. Remove the cover of the headrest first.
3. Remove the remaining seat covers.
To refit the seat covers
1. Repeat the above steps in reverse order.
2. To fit and tidy up the seat cover with fabric tidier(45), ensure all
covers and trim are replaced correctly. (fig. 66)
9.3 Internal cushion of seat cover
1. Semicircle foam cushion (46) and internal cushion (47) of seat
cover are suitable for the rearward facing.
2. Internal cushion (47) of seat cover is suitable for Group I of
forward facing. (fig. 67)
CAUTION: Never use the child car seat without the covers
supplied, always ensure that the covers and harness straps
are correctly installed. In case of doubt, please contact our
Customer Service Department.
16
65
07
08
09
66
45
46
47
67

10.1 The category of child car seat
The APRAMO® ONE TM seat is classified for "Universal" and
"Semi-universal" use, the suitable fitting methods as below:
10. Applicable Car List
Universal UniversalSemi-Universal
GROUP
Category
Rearward facing
Forward facing
3-Point vehicle
belt with retractor
ISOFIX
Top tether
5-Point safty harness
Adjustable headrest
Adjustable recline
GROUP 0+
0 - 13KG
(APPR 0 - 18M)
GROUP I
9 - 18KG
(APPR 9M - 4Y)
GROUP II
15 - 25KG
(APPR 3 - 6Y)
GROUP II & III
15 - 36KG
(APPR 3 - 12Y)
Semi-
Universal Universal
10.2 As a "Universal" child car seat
It will fit most, but not all car seat positions for general use in
vehicles that the vehicle is capable of accepting a "Universal"
child car seat for this age Group in the vehicle handbook.
10.3 As a "Semi-universal" child car seat
It is suitable for fixing into the seat positions of the following cars:
17

3-Point
Vechicle Belt
ISOFIX
Car Manufacture Model
Alfa Romeo
Guilietta (2010>)
Mito (2009>)
Audi
A1 (2011>)
A1 Sportback (2012>)
A4 Allroad (2009>)
A4 Av ant (2008>)
A4 S4 (2009>)
A5 (2007>)
A5 Sportback (2009>)
A6 (2011>)
A6 Allroad (2011>)
A6 Avant (2011>)
A6 S6 (2011>)
A7 Sportback (2011>)
A8 (2011>)
A8 S8 (2011>)
Q3 (2013>)
Q5 (2009>)
Q7 (2006>)
Bentley
Continental GT (2003-2011)
Continental GTC (2005-2012)
Mulsanne (2010>)
18