Apria Healthcare React Health Luna G3 User manual

Power Cord
DC
Inlet
Power Adapter
SD Card Slot
SD Card
Air
Outlet
Tubing
Power Plug
Air
Outlet
Heated
Tubing
Heated
Tubing
Heated
Tubing Joint
Place the device on a firm
flat surface.
See User Guide page 4
Connect the Power
Cord: Insert the plug
of the power adapter
into the DC inlet on
the back of the device.
Connect the power
cord to the power
adapter. Plug the other
end of the power cord
into the power outlet.
NOTE: If you have a BPAP device see User Guide
page 4 to connect the Power Cord Locker.
Connect the end of the tubing
to the air outlet of the device.
If using heated tubing,
connect the heated tubing
joint to the air outlet of the
device, and then insert the
power plug into the heated
tubing port on the back of
the device.
Connect the other end of
the tubing to the mask
according to the user
manual for the mask.
See User Guide page 5
Press down the water chamber, and then remove
it. Open the water chamber cap and fill the water
chamber with approximately 360 ml of water.
See User Guide page 5
Close the cap after the water is filled and return it to
the device.
See User Guide page 6
1
2
3
5
6Insert the SD card into the SD
card slot.
See User Guide page 6
Get Started
Reference your Apria Sleep Therapy User Guide
or go to Apria.com/Sleep for more details.
Your Apria Sleep Therapy
Quick Start Guide
React Health Luna®G3
let us
help!
4
Formerly known as 3B Medical, Inc.
Connect the device to a power outlet, press the
Start/Stop button and the device will start
delivering air.
See User Guide page 6
7

If you have any questions or need help setting up your device and
getting started, please call us or visit Apria.com/Sleep.
877.265.2426
Monday - Friday: 8 a.m. - 10 p.m. ET
Saturday: 11 a.m. - 7:30 p.m. ET
©2022 Apria Healthcare Group LLC SLP-4389 08/22_v2
Fit your mask. If your doctor prescribed a
specific mask and size, follow the fitting
instructions provided by the manufacturer. If
you received a mask with multiple cushions,
follow these instructions:
There is a mask cushion currently attached
to the frame of your mask. This size fits most
patients. Once you begin therapy, if your mask is
leaking or feels uncomfortable, try removing the
existing cushion and replacing it with a dierent
size cushion. If you are between sizes, it is
best to use the larger cushion. Use the Fitting
Template (for nasal mask and full face mask)
and/or the manufacturer’s instructions included
with your mask for help.
See User Guide page 7
Nasal Mask Nasal Pillow
Mask
Full Face Mask
11
10
12
14
13
15
8
9
Attach the tubing to
the PAP machine.
See User Guide page 11
Make sure to follow the cleaning and
maintenance instructions provided and review
the recommended supply replacement schedule.
See User Guide pages 20–21
Your setup is complete. You are now ready to
begin your PAP therapy!
See User Guide page 15
Check for air leaks.
Small leaks are acceptable. If large leaks occur,
consult your Apria Sleep Therapy User Guide.
See User Guide pages 13–14
Lie down and take four deep breaths.
The machine should start automatically. If you do
not hear the machine start, press the Start
Therapy/Standby button. Relax and begin to take
slow breaths through your nose.
See User Guide page 13
Attach the tubing to your mask.
(If using prescribed oxygen, consult page 11 in
your Apria Sleep Therapy User Guide.)
See User Guide page 11
Put on your mask.
See User Guide pages 8–10