Lotus M-9520A User manual

Product Name
Respiratory Face Mask
Model
M-9520A
Photo
Intended Use
As a respirator, it is intended to help reduce wearer exposure to certain airborne
particles (solid and liquid aerosols) which are hazardous to health.
Reference standard
EN 149:2001+A1:2009
Classification
FFP2 NR
Reference regulation
Regulation (EU) 2016/425 of the European Parliament and of the Council
Component
Face Mask Body、Nose Clip、Earloop、Sponge pad
Material
Polypropylene non-woven fabrics
Specs
Maximum penetration of test aerosol : < 6%
Total inward leakage（TIL）: < 8%
Inhalation resistance : < 70 Pa at 30L/min, < 240 Pa at 95L/min
Exhalation resistance : < 300 Pa at 160L/min
Checks prior to use
Before use, check the date of storage of a mask and the technical condition whether a
mask has no wisible mechanical damage, is not contaminated or incomplete. A damaged
mask and the one whose storage data has been exceeded cannot be used
Usage Method
1. Pull an extend the mask inner side to the face with two hands，ensure the nose clip
is upward.
2. Hold the mask on the face and pull the earloop to the ears.
3. Press the nose clip to fit the shape of the nose.
4. Check and press the mask fit to the face to minimize leakage. If you cannot achieve
a proper seal, DO NOT enter the contaminated area. See your supervisor.
Duration
Less than 8 hours is recommended.

Limitations
1.The product is non-sterile, please don’t use in environment sterile required.
2.It does not protect the respiratory system against aerosols containing radioactive
particles, viruses and enzymes.
Warning
1、This respirator helps protect against certain particulate contaminants but does
not eliminate exposure to or the risk of contracting any disease or infection. Before
any use please read carefully the instructions for use and keep it. Never use a
product outside its intended area of use. It is brought to the attention of users that a
product, even tested and certified according to one or more standards, is never a
total guarantee of protection against the risk (s) involved. Always read the limits of
use and protection and the precautions for use. Failure to follow all instructions and
limitations on the use of this product could reduce the effectiveness of respirator
and result in sickness or death. For proper use, see supervisor, or user Instructions,
or contact occupational safety for instruction.
2、This product does not supply oxygen. Use only in adequately ventilated areas
containing sufficient oxygen to support life.
3、Do not use when concentrations of contaminants are immediately dangerous to
health or life.
4、Do not use in explosive atmospheres.
5、Leave work area immediately and return to fresh air if (a) breathing becomes
difficult, or b) dizziness or other distress occurs.
6、Facial hairs or beards and certain facial characteristics may reduce the
effectiveness of this respirator.
7、Never alter or modify this respirator in any way.
Shelf Life
Three Years
Storage condition
Storage under dry and room temperature, away from light.
Manufacturer
Company: Trust Loyalty & Glory Epoch Network Technology Co., Ltd.
Address: No. 39 Jiangpu Road，Suzhou Industrial Park，Suzhou City，Jiangsu
Province，China
Website: http://www.mainage.com/
Tel:[phone]
E-mail：[email protected]
EU Authorized
representative:
Name:：Lotus NL B.V.
Address: Koningin Julianaplein 10,1e Verd, 2595AA, The Hague, Netherlands.
E-mail：[email protected]
The notified body
involved in the
conformity
assessment and The
notified supervisory
body:
BSI Group The Netherlands B.V.
Say Building, John M. Keynesplein 9, 1066 EP, Amsterdam
Notified Body No. NB 2797

End of shelf life
See information supplied by the
manufacturer
Temperature
range of storage
conditions
Maximum relative humidity
of storage conditions
Explanation of
graphic signs and
symbols used
FFP2：symbols of the protective
class of the filtering half-mask
(protection level in accordancewith
EN 149:2001+A1:2009)
xxxx The product meets the
basic requirements of European
Do not reuse
Don’t use when packing
damaged