APW Wyott XTRM-2 User manual

Phone: [phone]
Fax: [phone]
Toll Free: [phone]
Website: www.apwwyott.com
E-mail: [email protected]
INSTALLATION
AND
OPERATING
INSTRUCTIONS
INTENDED FOR OTHER THAN HOUSEHOLD USE
Models: XTRM-2, XTRM-3
RETAIN THIS MANUAL FOR FUTURE REFERENCE
UNIT MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES
P/N 93000077 9/06
1
RADIANT CONVEYOR TOASTER
APW WYOTT
729 Third Avenue
Dallas, TX 75226
This equipment has been engineered to provide you with year-round dependable service when used
accordingtotheinstructionsinthismanualandstandardcommercialkitchenpractices.
Initial heating of unit may generate smoke or fumes and must be done in a well ventilated area.
Overexposuretosmokeorfumesmaycausenauseaordizziness.
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and
liquidsinthevicinityofthisoranyotherappliance. !!
WARNING: Improper installation, adjustment, alteration, service or maintenance can
cause property damage, injury or death. Read the Installation, Operating and
MaintenanceInstructionsthoroughlybeforeinstallingorservicingthisequipment. !!
R

SAFETY PRECAUTIONS
Before installing and operating this equipment be sure everyone involved in its operation are fully trained
andareawareofallprecautions.Accidentsandproblemscanresultbyafailuretofollowfundamentalrules
andprecautions.
The following words and symbols, found in this manual, alert you to hazards to the operator, service
personnelortheequipment.Thewordsaredefinedasfollows:
!WARNING: This symbol refers to a potential hazard or unsafe practice, which could result in
seriousinjuryordeath.
!
!
!DANGER:Thissymbolwarnsofimminenthazardwhichwillresultinseriousinjuryordeath.
!
!CAUTION:Thissymbolreferstoapotentialhazardorunsafepractice,whichmayresultinminoror
moderateinjuryorproductorpropertydamage.
!
!NOTICE:Thissymbolreferstoinformationthatneedsspecialattentionormustbefullyunderstood
eventhoughnotdangerous.
APW Wyott takes pride in the design and quality of our products. When used as intended and with proper
care and maintenance, you will experience years of reliable operation from this equipment. To ensure best
results,itisimportantthatyoureadandfollowtheinstructionsinthismanualcarefully.
Installationandstart-upshould be performedbyaqualifiedinstallerwhothoroughlyread,understands and
followstheseinstruction.
Ifyouhavequestionsconcerningtheinstallation,operation,maintenanceorserviceofthisproduct,contact
APWWyottFoodserviceEquipmentCompany’s“TechnicalServiceDepartment”.
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment. For
WarrantyServiceand/orParts,thisinformationisrequired.
ModelNumber SerialNumber DatePurchased
Notes:
2

1. IMPORTANT SAFETY INSTRUCTIONS
SECTION ITEM PAGE
1Important Safety Instructions 3
2General Information 4
3Installation Instructions 5
4Operation Instructions 5
5Cleaning Instructions 6
6Specifications 6
7Wiring Diagram 7
8Parts Lists with Exploded Views 8
XTRM-2 8
XTRM-3 10
9Warranty 12
3
TABLE OF CONTENTS
!
!WARNING: Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do not match, contact a qualified electrician to determine
thepropervoltageandsizeandinstalltheproperelectricaloutlet.
!
IMPORTANT: Read the following important safety instructions to avoid personal injury or
death,andtoavoiddamagetotheequipmentorproperty.
!
!
!WARNING: APW Wyott toasters are designed, built, and sold for commercial use. If positioned
where the general public can usethem, make sure that all cautions, warnings, and operating
instructions are clearly posted near each unit to insureproper operation, reduce the chance of
personalinjuryand/orequipmentdamage.
!
!WARNING: Ifservice isrequiredonthisunit, contactyour authorizedAPWWyottServiceAgent,or
contacttheAPWWyottServiceDepartmentdirectlyat(214)421-7366or(800)527-2100;fax(214)
565-0976.
!
WARNING: Unit is not waterproof. DO NOT submerge in water. Do not operate if it has been
submergedinwater.Donotcleantheunitwithawaterjet.
!
!
!WARNING: To avoid any injury, turn the power switch off at the fuse disconnect switch/circuit
breaker or unplug the unit from the power source and allow to cool completely before performing
anymaintenanceorcleaning.
!
WARNING: To avoid electrical shock, always unplug the unit before performing cleaning or
maintenance.
!
!
WARNING: For safe and proper operation, the unit must be located a reasonable distance from
combustible walls and materials. If safe distances are not maintained, discoloration or combustion
couldoccur.
!
!
WARNING:To avoidelectrical shockor personalinjury, donot steamclean oruse excessivewater
ontheunit.
!
! !WARNING: InEurope,appliancemustbeconnected by an earthing cable to all otherunits
inthecompleteinstallationandthencetoan independent earth connection in compliance
withEN60335-1and/orlocalcodes
!
!
WARNING: An earthing cable must connect the appliance to all other units in the complete
installationandfromtheretoanindependentearthconnection.

4
!
!
WARNING: Genuine APW Wyott Replacement Parts are specified to operate safely in the
environments in which they are used. Some aftermarket or generic replacement parts do not have
the characteristics that will allow them to operate safely inAPW Wyott equipment. It is essential to
use APW Wyott Replacement Parts when repairing APW Wyott equipment. Failure to use APW
WyottReplacement Parts maysubject operators of theequipment to hazardous electricalvoltage,
resultinginelectricalshockorburn.
!
!WARNING: This product has no “user” serviceable parts. To avoid damage to the unit or injury to
personnel, use only Authorized APW Wyott Service Agents and genuine APW Wyott Parts when
serviceisrequired..
!
!CAUTION: Someexterior surfaces on theunit will gethot. Use caution whentouching these areas
toavoidinjury.
!
CAUTION: Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or it’s contents from accidentally falling, and strong
enoughtosupporttheweightoftheunitandfood.
!
!
!CAUTION:Useonlynon-abrasivecleaners.Abrasivecleaners couldscratchthefinish ofyourunit,
marringit’sappearanceandmakingitsusceptibletodirtaccumulation.
!
!WARNING: Failure to provide clearances will cause unit failure and invalidate warranty claims
(seeinstallationinstructions).
!
!NOTICE:Do not use toppings (butter, etc.) on product as product is inverted during normal
operation.
!
!NOTICE:Operatingtoasterwithoutlegsinvalidatesanywarrantyclaims.
!
!NOTICE: Neglecting to keep fan opening clean could result in toaster failure.
2. GENERAL INFORMATION
XTRM-2: 1.
2. ProductOpening-1.50”H
3. ElectricalRequirements(Singlephase):
A.208Volt,2840Watt,13.7Amp.
B.230/240Volt,2840Watt,11.9Amp.
C.Cordsetconfiguration
1.Eachtoasterequippedwiththreewiregroundedcordsetandstandard3prongplug.
4.Net/ShippingWeight–49
2. ProductOpening-1.50”H
3. ElectricalRequirements(Singlephase):
A.208Volt,3340Watt,16.1Amp.
B.230/240Volt,3340Watt,14.0Amp.
C.Cordsetconfiguration
1.Eachtoasterequippedwiththreewiregroundedcordsetandstandard3prongplug.
4. Net/ShippingWeight–
Overall Dimensions w/Wire Feeder - 15.033”H (38.183cm) x 16.191”W (41.125cm) x
19.658”D(49.931cm) (3.810cm)x10.50”W(26.67cm)
lb.(22.26kg)/46lb.(20.865kg)
XTRM-3: 1. Overall Dimensions w/Wire Feeder - 15.033”H (38.183cm) x 19.191”W (48.745cm) x
19.658”D(49.931cm) (3.810cm)x13.50”W(34.29cm)
50lb.(22.8kg)/47lb.(21.319kg)

3. INSTALLATION INSTRUCTIONS
I.CheckContents:RefertoFigure1,accountforthefollowingparts:
A.Removefoampadandslidereflectortrayinwith
wirefeederinuprightpositionasshown.
B.Ensuretrayisproperlyengagedintrayslides.Todothis
simplyholdthefrontofthetrayhigherthantherearas
thebackofthetraymustslideundertheslideon
eitherside,Youwillknowifdonecorrectlybecause
traywillbesecure.Norockingorteeteringwilltakeplace.
C.ToastDrawer-shippedinplace
D.InstructionManual-shippedloose
2.ToasterPlacement:
A. Locate toaster near a grounded receptacle of the proper configuration (see below). Plug
thecordsetdirectlyintoreceptacle(DONOTUSEANEXTENSIONCORD).
1.IntheU.S.:208,230/240Vuses NEMA6-20R.
B.Placetoasteronflatsurfaceprovidingfollowingminimumclearances:
1.Base=oneinch(providedwithlegsinstalled).
2.Sideandbackwalls=twoinches
3.Overhead=Enoughspacetoallowadequateheatdisplacement.
C.Positiontoasterwherecustomerswillnotcontactanysurfacelabeled“CAUTIONHOT”.
4. OPERATION INSTRUCTIONS
1.Preparation
A.Cleantoasterthoroughlybeforefirstuse(Seecleaninginstructions).
B.ControlsFamiliarity
1. Main Power Switch (located on very bottom of control panel): There are two rocker
switches.Thebottomswitch powers theunit“ON”. It alsoturnson the bottomelement.
Thetopswitchisastandbyswitchthatrunsthetopelement.Whenthestandbyswitchis
in the “ON” position the unit is at full power. When the standby switch is in the “OFF”
positiontheunitisrunningat50%.
a)FullPower:Flipbothrockerswitchestotheright.
b)PowerOff:Flipbothrockerswitchestotheleft.
c)Warm-uptime:Allowfive(5)minutes.
2.NormalUse
A.LoadingProduct
1. Place product on Wire Feeder. The conveyor will automatically draw product through
thetoasterataspeeddeterminedbyconveyorspeedcontrol.
2.ConveyorSpeedControl:Setknobtothethree(3)positionforwarm-up.
B.ToastingDarkness:determinedbyconveyorspeed&thermostatcontrol.
1. Darkest toasting - set conveyor speed control to far left setting & thermostat controls to
highestsetting.
2.Lightesttoasting-setconveyorspeedcontroltofarrightsetting.
3.Otherfactorsaffectingtoastingdarkness.
3.ThermostatControls:
A.Thetopthermostatrunsthetopelement&thebottomthermostatrunsthebottomelement.
Figure 1
CB
A
5
!
WARNING:OperatingtoasterwithoutReflectorTrayreducestoastingcapabilities.
!

6
a) Productmoistness-moisterproductrequiresslowerspeeds
b) Sugar content in product - product with more sugar requires slower speeds
c) ProductTemperature-coolerproductrequiresslowerspeeds
4.Forbestresults,usedayoldbreadstoredroomtemperature.
5. CLEANING INSTRUCTIONS
1.DailyCleaning
A.Withtoasteroffandcool,turntoasteronandsetconveyorspeedtofour.
B. Using a plastic abrasive pad, wipe the conveyor belt in a back and forth motion (side-to side)
motion to remove baked-on product. Wipe the conveyor belt in the same manner with a hot,
dampcloth.
C.Turnofftoaster.
D. Slide the reflector/crumb tray out of toaster by pulling forward. Dispose of crumbs and wash
trayinhot,soapywater.Drytrayandplacebackintoaster.
E. Remove toast drawer from toaster by sliding out and lifting up. Dispose of crumbs and wash
drawer in hot, soapy water. Wipe crumbs from inside the toaster with a hot, damp cloth. Dry
drawerandplacebackintoaster.
F.Wipetheexteriorsurfacesofthetoasterwithahot,dampcloth.
6. SPECIFICATIONS
XTRM-2
20.510
520.95mm
2.709
69mm
4.493
(114mm)
50°
2.820 (72mm)
6.654
(169mm)
19.482
(495mm)
CAUTION HOT
16.254
(413mm)
13.323
(338mm)
13.967
(355mm)
14.967
(380mm)

Rear Fan
Control Fan
Motor
Top Element
Bottom Element
Terminal
Block
Top
EGO
Bottom
EGO
Top
Switch
Bottom
Switch
Existing Wire
Rheostat
EGO
EGO
H2
H2
Top
Top
L1
L1
P1
P1
Pilot
Pilot
P2
P2
H1
H1
L2
L2
BLACK
BLUE
L1 L1
L1
L2 L2
G
L2
1
1
1
2
24
1
23
BLACK
BLUE
BLUE
77
7
66
66 7
8
88
8
12
12
13 13
14
14 14
12
L1
L2
L2
BLACK
2
33
3
3
4
44
5
5
5
5
5
9
9
9
10 10
10
10
11
11
11
11
15
15
L1
L2
16
16
16
XTRM-3
7. WIRING DIAGRAM
7
19.254
(489mm)
16.323
(415mm)
13.967
(355mm)
14.967
(380mm)
4.493
(114mm)
50°
2.820 (72mm)
6.654
(169mm)
2.647
(67mm)
20.782
(527.86mm)
19.420
(493mm)
s etrc VeI om i i w

63
64
58
4
59
46
38
28
22
34 7
17 20
33
19
44
50
51
8
12
13
30
5
14
36
37
42
11 60
9
10
16
41
1
15
40
3
25
26
32
43
53
6
24
29
2
31
47
57
56
55
39
23 27
21
35 48
49
62
52
61
XTRM-2 EXPLODED VIEW
8. PARTS LISTS & EXPLODED VIEWS
8

9
ITEM PART NUMBER DESCRIPTION (XTRM-2 PARTS LIST) QUANTITY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18*
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45*
46
47
48
49
50
51
52
53
54*
55
56
57
58
59
60
61
62
63
64
65*
66*
67*
93000040
93000158
93000159
93000116
93000115
93000225
93030181
38130
38125
38122
83248
83956
83868
83267
93000226
85149
85144
89184
85284
89076
89030
83261
93200061
70444800
93200066
69104-EGO
69103-EGO
83333
88705
93000206
93100065
93100197
93000233
93000302
75617
83821
89061
93000194
89073
88889
81600087
89111
83277
89145
93200064
89054
85287
89063
94000114
93200084
85281
93000196
85282
88940
93000232
89039
93200303
58081
93000230
93000231
93000199
93000229
93000227
93000186
54093
54094
88951
89056
69154
89182
1
1
1
1
1
2
1
2
2
1
2
1
2
4
2
1
1
1
1
4
4
1
1
2
1
2
2
1
2
1
1
1
1
1
1
2
10
4
10
14
2
1
1
1
1
2
1
9
12
1
1
1
1
9
2
2
1
1
2
2
1
8
2
2
2
2
8
1
1
1
XTRM 2, RIVIETASSEMBLY
XTRM-2&3 CONTROLPANEL EXTRUSION
EXTRUSION, XTRM 2&3
XTRM-2&3, PANEL, LEFT OUTER
XTRM-2&3, PANEL, RIGHT SIDE
END CAP, F/L & B/R
COVER, TOP, XTRM 2
ASSY, CLIP BEARING
BEARING FLANGED POLYMER
W'ASSY IDLER SHAFT
BEARING, SHAFT
DRIVE SHAFTASSYAT-10 SEGMENTED BELT
SPACER, CONVEYOR SHAFT
LEG 1" PLASTIC W/CHROME
END CAP, B/L & F/R
MOTOR,AT'S 208/240V 60HZ VARIABLE
MOTOR,AT'S 230V 60HZ VARIABLE
BUSHING, .875 HEYCO 2126
FAN, COOLING 4.5" 105CFM 208/230V
WASHER, LOCK 1/4 INTERNAL
SCREW, 10-32X3/4
SPROCKET, 12 TOOTH 1/4 PITCH 3/8 BORE
ASSY, PLATE, CONTROLS
SWITCH, ROCKER ON-OFF
PLATE, SPACE, CONTROLS
INFINITE SWITCH-EGO (208V)
INFINITE SWITCH-EGO (230/240V)
RHEOSTAT 208/240 V. PIGGY-BACK TERM
KNOB 039-266 8ABLACK
BELT, WIRE 27x.05 3 SEG.
ASSY, XTRM 2 FEEDER
DRAWER TOAST
SPROCKET, 32 TOOTH 1/4 PITCH
CHAIN, 1/4" DRIVE 67 PITCH
KNOB W/NO'S. 0 TO 9
BRACKET, BEARING
NUT, HEX 10-24
XTRM 2&3, SMALLELEMENT COVER
SCREW, #8 X 1/2 HEX TAPIT SHT MTLTYPE AB
SCREW #8 X 1/2AB SMS PHLTRUSS LGM NI PLT
SCREW, 8-32 x 3/8, PHILLIPS, PAN HEAD
BUSHING, STRAIN RELIEF SR-7W-2
CORDSET,ASSY 208/240V (CORD 85640)
TERMINALBLOCK 300V-30AMPS
LABEL, XTRM CONTROL
NUT, KEPS 6-32
FAN GUARD
NUT, HEX 8-32
SCREW, COUNTERSINK, 6-32X5/16,Z,BLK
XTRM-3, INSULATION CENTER PANEL
FAN,COOLING,3" DIA, 208/230V
XTRM-2 & 3AIR DEFLECTOR
Guard, 3.15 Sq. Fan
WASHER, 1-1/2 RD
XTRM-2&3, RIGHT SIDE INSULATION
SCREW, 8-32X5/16 PH PAN SS
LABEL, SPEED GUIDCAUTION HOT!
LABEL, CAUTION HOT!
XTRM-2&3, RIGHT EXTRUSION INSULATION
XTRM-2&3, LEFT EXTRUSION INSULATION
XTRM 2, BACK COVER
HEX MACHINE SCREW, #6-32 X 3/4
XTRM-2&3, CONTROLBOX INSULATION
XTRM-2, ELEMENT RACK
ELEMENT, 208V-1400W
ELEMENT, 230/240V-1400W
SCREW, 8-32x2" PHILLIPS PAN MS SS
WASHER #8 INTERNALLOCK, SS
THERMOSTAT, THERM-O-DISC W/MOUNT CLIP
BUSHING, .5 HEYCO 2058
*NOT SHOWN

XTRM-3 EXPLODED VIEW
10
64
5
6
7
8
9
4
1
13
14
15
16
22 23
24
25
26
27
28
29
30
31
32
34
37
38
39
40
42
43
44
47
48
57
58
56
59
60
50
41
51
53
2
3
21
33
52
54
63
1
11
17
19
35 36
20

11
ITEM PART NUMBER DESCRIPTION (XTRM-3 PARTS LIST) QUANTITY
1
2
3
4
5
6
7
8
9
10*
11
12*
13
14
15
16
17
18*
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45*
46*
47
48
49*
50
51
52
53
54
55*
56
57
58
59
60
61*
62*
63
64
65*
66*
67*
93200040
93000158
93000159
93000116
93000115
93000225
93230047
38130
38125
93200070
83248
83976
83868
83267
93000226
85149
85144
89184
85284
89076
89030
83261
93200061
70444800
93200066
69104-EGO
69103-EGO
83333
93200036
88705
83880
93200052
93200048
93000233
82902
75617
83821
89061
93000194
89073
88889
81600087
89111
83277
89145
93200064
89054
85287
89063
94000114
93200084
85281
93000196
85282
88940
93000232
89039
93200303
58081
54021
54032
93000230
93000231
93200199
93000229
93000227
88951
89056
69154
89182
1
1
1
1
1
2
1
2
2
1
2
1
2
4
2
1
1
1
1
4
4
1
1
2
1
2
2
1
2
2
1
1
1
1
1
1
2
10
4
10
14
2
1
1
1
1
2
1
9
12
1
1
1
1
9
2
2
1
1
2
2
2
2
1
8
2
8
1
1
1
XTRM 3, RIVIETASSEMBLY
XTRM-2&3 CONTROLPANEL EXTRUSION
EXTRUSION, XTRM 2&3
XTRM-2&3, PANEL, LEFT OUTER
XTRM-2&3, PANEL, RIGHT SIDE
END CAP, F/L & B/R
COVER, TOP, XTRM 3
ASSY, CLIP BEARING
BEARING FLANGED POLYMER
SHAFT, IDLER XTRM
BEARING, SHAFT
ASSEMBLY, DRIVE SHAFT
SPACER, CONVEYOR SHAFT
LEG 1" PLASTIC W/CHROME
END CAP, B/L & F/R
MOTOR,AT'S 208/240V 60HZ VARIABLE
MOTOR,AT'S 230V 60HZ VARIABLE
BUSHING, .875 HEYCO 2126
FAN, COOLING 4.5" 105CFM 208/230V
WASHER, LOCK 1/4 INTERNAL
SCREW, 10-32X3/4
SPROCKET, 12 TOOTH 1/4 PITCH 3/8 BORE
ASSY, PLATE, CONTROLS
SWITCH, ROCKER ON-OFF
PLATE, SPACE, CONTROLS
INFINITE SWITCH-EGO (208V)
INFINITE SWITCH-EGO (230/240V)
RHEOSTAT 208/240 V. PIGGY-BACK TERM
XTRM 3, ELEMENT RACK
KNOB 039-266 8ABLACK
CONVEYOR BELT 79 LINKS
ASSY, XTRM 3 FEEDER
XTRM-3, TOASTER DRAWER
SPROCKET, 32 TOOTH 1/4 PITCH
CHAIN, 1/4" DRIVE 67 PITCH
KNOB W/NO'S. 0 TO 9
BRACKET, BEARING
NUT, HEX 10-24
XTRM 2&3, SMALLELEMENT COVER
SCREW, #8 X 1/2 HEX TAPIT SHT MTLTYPE AB
SCREW #8 X 1/2AB SMS PHLTRUSS LGM NI PLT
SCREW, 8-32 x 3/8, PHILLIPS, PAN HEAD
BUSHING, STRAIN RELIEF SR-7W-2
CORDSET,ASSY 208/240V (CORD 85640)
TERMINALBLOCK 300V-30AMPS
LABEL, XTRM CONTROL
NUT, KEPS 6-32
FAN GUARD
NUT, HEX 8-32
SCREW, COUNTERSINK, 6-32X5/16,Z,BLK
XTRM-3, INSULATION CENTER PANEL
FAN,COOLING,3" DIA, 208/230V
XTRM-2 & 3AIR DEFLECTOR
Guard, 3.15 Sq. Fan
WASHER, 1-1/2 RD
XTRM-2&3, RIGHT SIDE INSULATION
SCREW, 8-32X5/16 PH PAN SS
LABEL, SPEED GUIDCAUTION HOT!
LABEL, CAUTION HOT!
ELEMENT, 208V-1650W
ELEMENT, 230/240V-1650W
XTRM-2&3, RIGHT EXTRUSION INSULATION
XTRM-2&3, LEFT EXTRUSION INSULATION
XTRM 3, BACK COVER
HEX MACHINE SCREW, #6-32 X 3/4
XTRM-2&3, CONTROLBOX INSULATION
SCREW, 8-32x2" PHILLIPS PAN MS SS
WASHER #8 INTERNALLOCK, SS
THERMOSTAT, THERM-O-DISC W/MOUNT CLIP
BUSHING, .5 HEYCO 2058
*NOT SHOWN

12
9. APW WYOTT EQUIPMENT LIMITED WARRANTY
APW Wyott Foodservice Equipment Company warrants it's equipment against defects in materials and workmanship, subject to the
followingconditions:
Thiswarrantyappliestotheoriginalowneronlyandisnotassignable.
Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the option of
APW Wyott such product will be repaired or replaced by APW Wyott or its Authorized Service Agency. APW Wyott will only be
responsible for charges incurred or service performed by its Authorized Service Agencies. The use of other than APW Wyott
Authorized ServiceAgencies will void this warranty andAPW Wyott will not be responsible for such work or any charges associated
withsame.TheclosestAPWWyottAuthorizedServiceAgentmustbeused.
This warranty covers products shipped into the 48 contiguous United States, Hawaii, metropolitan areas ofAlaska and Canada. There
willbenolaborcoverageforequipmentlocatedonanyislandnotconnectedbyroadwaytothemainland.
Warranty coverage on products used outside the 48 contiguous United States, Hawaii, and metropolitan areas of Alaska and Canada
mayvary.ContacttheinternationalAPWWyottdistributor,dealer,orserviceagencyfordetails.
TimePeriod
One year for parts and one year for labor, effective from the date of purchase by the original owner. TheAuthorized ServiceAgency
may, at their option, require proof of purchase. Parts replaced under this warranty are warranted for the un-expired portion of the
originalproductwarrantyonly.
Exceptions*Gas/Electric Cookline: Models GCB, GCRB, GF, GGM, GGT, CHP-H, EF, EG, EHP. Three (3) Year Warranty on all
componentparts,exceptswitchesandthermostats.(2additionalyearsonpartsonly.Nolaboronsecondorthirdyear.)
*BroilerBriquettes,
*HeatStrips: ModelsFD,FDL,FDD,FDDL. Two(2)YearWarrantyonelementonly. Nolaborsecondyear.
*GlassWindows,Doors,Seals,RubberSeals,LightBulbs:
Inallcases,partscoveredbyextendedwarrantywillbeshippedFOBthefactoryafterthefirstyear.
PortableCarryInProducts
Equipment weighing over 70 pounds or permanently installed will be serviced on-site as per the terms of this warranty. Equipment
weighing 70 pounds or under, and which is not permanently installed, i.e. with cord and plug, is considered portable and is subject to
the following warranty handling limitations. If portable equipment fails to operate in its intended manner on the first day of
connection,oruse,atAPWWyott'soptionoritsAuthorizedServiceAgency,itwillbeservicedonsiteorreplaced.
From day two through the conclusion of this warranty period, portable units must be taken to or sent prepaid to the APW Wyott
AuthorizedServiceAgencyforin-warrantyrepairs.Nomileageortravelchargesareallowedonportableunitsafterthefirstdayofuse.
If the customer wants on-site service, they may receive same by paying the travel and mileage charges. Exceptions to this rule: (1)
countertopwarmersandcookers,whicharecovered under the EnhancedWarrantyProgram,and(2)toasters or rollergrillswhichhave
instoreservice.
Exclusions
Thefollowingconditionsarenotcoveredbywarranty:
*Equipment failure relating to improper installation, improper utility connection or supply and problems due to
ventilation.
*Equipment that has not been properly maintained, calibration of controls, adjustments, damage from improper cleaning
andwaterdamagetocontrols.
*Equipment that has not been used in an appropriate manner, or has been subject to misuse or misapplication, neglect,
abuse,accident,alteration,negligence,damageduringtransit,deliveryorinstallation,fire,flood,riotoractofgod.
*Equipmentthathasthemodelnumberorserialnumberremovedoraltered.
If the equipment has been changed, altered, modified or repaired by other than an Authorized Service Agency during or after the
warrantyperiod, then themanufacturer shall notbe liable for any damagesto any personor to anyproperty, whichmay result from the
useoftheequipmentthereafter.
This warranty does not cover services performed at overtime or premium labor rates. Should service be required at times which
normallyinvolve overtimeorpremiumlaborrates,theownershallbechargedforthedifferencebetween normalserviceratesandsuch
premiumrates.APWWyottdoesnotassumeanyliabilityforextendeddelaysinreplacingorrepairinganyitemsbeyonditscontrol.
Inallcases,theuseofotherthanAPWWyottAuthorizedOEMReplacementPartswillvoidthiswarranty.
Thisequipmentisintendedforcommercialuseonly.Warrantyisvoidifequipmentisinstalledinotherthancommercialapplication.
WaterQualityRequirements
Water supply intended for a unit that has in excess of 3.0 grains of hardness per gallon (GPG) must be treated or softened before
being used. Water containing over 3.0 GPG will decrease the efficiency and reduce the operation life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered under warranty.
“THE FOREGOING WARRANTY IS IN LIEU OFANYANDALL OTHER WARRANTIES EXPRESSED OR IMPLIED
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSES
AND CONSTITUTES THE ENTIRE LIABILITYOFAPW WYOTT. IN NO EVENT DOES THE LIMITED WARRANTY
EXTENDBEYONDTHETERMSSTATEDHEREIN.”
9/05
RockGrates,CookingGrates,BurnerShields,Fireboxes:90DayMaterialOnly.NoLabor.
90DayMaterialOnly. NoLabor.