AQ-Tron BAT/32562 User manual
MANUAL
BAT/32562
TECHNICAL MANUAL
HC HOURS COUNTER
MAIN CHARACTERISTICS:
•Supply voltage range from 12V to 48V
•Separate input pin for enable the time-counting
•Flashing sandglass icon during the time-counting
•1/10 hour accuracy
•Maximum hours amount 99999.9
•Black ABS case
•Front side of the case : IP66 protection
•Working temperature range from -20°C to +60°C
•Mounting holes dimensions 36 x 24 mm
NOTE: The hours counter is designed to work properly with a supply voltage value inside
the indicated range, if voltage is out of range, it may be that the counter appears to work
correctly, but in this case right functioning is not ensured. Supply voltage that exceed the
maximum value can seriously, and permanently, damage the device.
MANUAL
BAT/32562
DIMENSIONS AND CONNECTING PIN DESCRIPTION
PIN DESCRIPTION
PIN
DESCRIPTION
1 Positive Input pin for enable the counting
2 Negative power supply
3 Positive power supply
4 Negative Input pin for enable the counting
MANUAL
BAT/32562
FUNCTION DESCRIPTION:
The circuit must be power feeded by pin 2 and 3, in this condition the amount of the
counted hours do not increase, because the counting is not enabled yet.
In order to start the counting and increase the amount of hours it is necessary to
enable the counter in one of the following way :
-Connecting to the positive voltage (positve of the battery) the pin 1 without
connecting-pin4
It is recommended to bring this Input to the connector through the start-key one, in
order to avoid that the counter remains always enabled, continuing the count of the
hours also when the machine is not working.
-Connecting to the negative voltage (negative of the battery) the pin 4 without
connecting the pin 1. It is recomended, also in this case, to connect the voltage only
when the machine is operating, (and so, through key’s pin) in order to avoid useless
time-counting.
Do not connect both the ways, the device may not work properly.
A sandglass icon flashing on the display indicates the time-counting activity.
WARRANTY:
grants the product for 12 months after the shipping date. The warranty is
valid only if all the rules described in this manual have been respected.
The warranty is limited to the duty to repair or replace without costs all the faulty parts
found during the validity of the warranty period. All costs linked to travelling expenses to
the customers are excluded.
Reparation/replacement of the faulty parts will be done in the shortest possible time in
compliance with the engagements of the building farm and without any obligation to any
kind of indemnity and/or compensation for direct or indirect damages.
Warranty will not be recognised on products showing some kind of tempering or external
applications that have been done on them.
The warranty period starts from the date of the shipping documents
MANUAL
BAT/32562
COMPLIANT STATEMENT
The device here descripted complianttothe following rules and europen normative.
EUROPEAN RULES:
Low voltage:
European : 2006/95/CEE
ELECTROMAGNETIC COMPATIBILITY
European: 2004/108/CEE
REFERENCE EUROPEAN NORMATIVE:
LOW VOLTAGE:
EN50178
EN60204
EN60335-1
EN60335-2-29
ELECTROMAGNETIC COMPATIBILITY:
EN55011
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
It is hereby stated that this product is eligible for CE marking.
Table of contents
