AQUA DREAM REEF-450-SILVER User manual

Aquarium Assembly Instructions
Reef Tank Salt Water Aquarium Series
3125 Mercer Ave Ste 103 & 104 Bellingham, WA 98225 [phone] II [phone] >>24/7 Technical Assistance<<

Identify and prepare space for level aquarium placement with plenty of room
to open the crates. Floor protection is also recommended.
Using proper safety gear and tools (hammer, gloves, protective glasses),
uncrate the aquarium and cabinet.
Remove all parts from inside the glass tank.
Place the cabinet in desired location. Ensure the cabinet is level and there
is enough room behind it to feed and plug in cables.
Place the tank on top of the cabinet, and line up all four corners.
Set up cabinet plumbing and sump system (see sump system assembly)
Install water pump (sold separately).
Install Protein Skimmer (optional, sold separately).
Add desired aquascaping and substrate to aquarium.
Install LED Coral Lights (optional, sold separately).
Add prepared salt water to sump system and aquarium.
**Ensure tank water cycles and chemistry is tested safe and at temperature
for coral and livestock several times before adding aquatic life**
*REEF-450-SILVER *REEF-600-BK *REEF-450-WT * REEF-600-SILVER
*REEF-500-SILVER * REEF-800-SILVER *REEF-500-WT * REEF-800-WT
* REEF-900-BK * REEF-1000-SILVER * REEF-900-SILVER * REEF-1000-WT
* REEF-1200-BK * REEF-1500-WT * REEF-1800-BK * REEF-2000-BK
©2023 AquadreamUSA all rights reserved www.aquadreamusa.com Aquarium Assembly Overview
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Aquarium Assembly Instructions
Reef Tank Salt Water Aquarium Series

A
C
D
A
B
A - Sump System tank
B - Filter Sock Holders
C - Pipes (x3)
D - Auto Top O Chamber
E - Return Chamber
F - Protein Skimmer
(optional, sold separately)
A - Sump System Tank
B - Water Pump Bay
(Pump Sold Separately)
C - Pipes
D - Auto Top O Chamber
E - Sump System Covers
F - Protein Skimmer Bay
(Skimmer Sold Separately)
Diagram 2:
Diagram 1:
©2023 AquadreamUSA all rights reserved www.aquadreamusa.com Aquarium and Parts Diagrams
A
C
C
B
B
F
F
D
D
E
E
Sump System Assembly Instructions
Reef Tank Salt Water Aquarium Series
**Note: Sump systems vary by model. Water Pump and Protein Skimmer sold separately.
Contact us for 24/7 tech support [phone] II [phone]
C
C

1 - Place Sump System Tank into cabinet with
windows facing out. [Fig. 1] Ensure o-rings are
in the pipe connecting pieces. [Fig. 2]
2 - Separate the top piece of each of the three
connecting pipes. [Fig. 3]
3 - Connect the top pieces to the underside of the
tank, [Fig. 4] and Install the three pipes. Start
with the smallest pipe on the leftmost outflow
connector. [Fig. 5] Connect all pipes to the sump
system and underside of the tank. [Fig. 6]
4 - Install Sump System Coverings. [Fig. 7]
©2023 AquadreamUSA all rights reserved www.aquadreamusa.com Plumbing Assembly 1
ig. 1
ig. 2
ig. 3
ig. 4
ig. 5
ig. 6
ig. 7

6 - Locate the mini buoy and its connected tube
inside the return chamber. [Fig. 9]
5 - Place the auto top o chamber on top of the
sump system. [Fig. 8]
7 - Attach the tube to the outlet at the base of the
auto top-o chamber. [Fig. 10]
8 - Install Water Pump (sold separately). [Fig. 11
and Fig. 12]
9 - Install Protein Skimmer (Optional, sold separate-
ly). [Fig. 13 and Fig. 14]
ig. 8
ig. 9
ig. 10
ig. 11
ig. 12
ig.13
ig. 14
©2023 AquadreamUSA all rights reserved www.aquadreamusa.com Plumbing Assembly 2

10 - Add your own aquascaping and substrate
suitable for desired livestock. [Fig. 15]
11 - Add your own prepared or purchased salt
water to sump system and aquarium tank.
[Fig. 16]
12 - Install LED Coral Lights (Optional, sold
separately). [Fig. 17]
**Ensure aquarium salt water is cycled and chemistry and temperature are
tested to be safe several times before adding live coral or aquatic life**
ig. 15
ig. 16
ig. 17
©2023 AquadreamUSA all rights reserved www.aquadreamusa.com Plumbing Assembly 3
www.aquadreamusa.com
3125 Mercer Ave
Ste 103 & 104
Bellingham, WA 98225
[phone]
[phone]
[email protected]
Website:
Address:
Phone:
Email:
Aquadream Contact Information