Aqua PRO AP200LV User manual

AP200LV / AP210 / AP550 / AP750LV
WATER FEATURE PUMP
- INSTRUCTIONS -
DATE
SEP 2019 v1.0 WWW.AQUAPROONLINE.COM.AU
HOTLINE    PHONE +   
EMAIL [e-mail]
MODEL
02AS008 / 02AL106
02AS002 / 02AL017
AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 1AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 1 2/5/2022 11:32 am2/5/2022 11:32 am

HOTLINE [phone] PHONE [phone] EMAIL [e-mail] WEB WWW.AQUAPROONLINE.COM.AU
CONGRATULATIONS ON YOUR PURCHASE
OF THIS PRODUCT BY AQUAPRO.
TECHNICAL SPECIFICATIONS
• Your AQUAPRO pump has a single moving part (an impellor set) therefore enabling easy cleaning and
maintenance.
• The motor and electrical components are encapsulated in epoxy resin, ensuring safe operation under water.
• The pump has a robust bearing and shaft design so no oil/grease lubrication is required.
• The AQUAPRO pumps that have plastic encased impellor parts and ceramic shafts (no exposed metal) may be
used in salt water applications.
• The AQUAPRO No1 fountain kit suits most models of small AQUAPRO pumps.
DESCRIPTION AP200LV AP210 AP550 AP750LV
VOLTAGE* 12V 220-240V 220-240V 12V
POWER* 5W 2W 10W 18W
MAX HEAD HEIGHT 0.6M 0.6M 0.95M 1.5M
MAX FLOW 200L/H 210L/H 550L/H 750L/H
INLET / OUTLET 8MMØ 8MMØ 12MMØ 12MMØ
CABLE LENGTH 1.8M 2M 2M 5M
* SUBJECT TO VARIATION ACCORDING TO LOAD.
Please read these instructions and familiarise yourself with the equipment before placing it in service. Correct and safe use of the
system requires strict compliance with the safety instructions. For safety reasons persons less than 16 years of age or people that are
not familiar with these instructions should not use this equipment.
FEATURES
INSTALLATION
YOUR AQUAPRO WATER FEATURE PUMP HAS BEEN MANUFACTURED WITH ADVANCED
TECHNOLOGY TO PROVIDE YOU WITH THE BEST QUALITY PUMP FOR YOUR WATER FEATURE.
1. If required, have a qualified electrician install weatherproof power point near to the water feature, (within the cable
length of the pump).
2. Place the pump in desired location, ensure the pump is on a stable surface that is free of sludge, sand and other
debris, and connect tubing to the outlet or attach fountain kit.
3. Ensure pump is submerged, then plug in power cord and switch on.
AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 2AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 2 2/5/2022 11:32 am2/5/2022 11:32 am

HOTLINE [phone] PHONE [phone] EMAIL [e-mail] WEB WWW.AQUAPROONLINE.COM.AU
WATER FEATURE PUMP
INSTRUCTIONS
• Disconnect power cord from the power supply
before performing maintenance. Never lift the
pump by the power cord.
• The only serviceable item is the impellor set. The
motor unit of the pump is encapsulated with epoxy
resin and does not need lubrication.
• All AQUAPRO submersible pumps are water
cooled; if pump becomes restricted it will overheat
and could cause permanent damage. Ensure pump
does not become blocked or restricted.
• The power cord cannot be replaced. If the cord is
damaged, the pump must be discarded.
• The impellor set is a wearing consumable part.
Regular inspections, cleaning and maintenance of
impellor is necessary to ensure longer impellor life. If
the impellor set becomes worn or damaged it should
be replaced (available from your dealer or special
orders). Failure to do so may cause serious damage
to pump.
1. FRONT CAGE 2. IMPELLOR COVER 3. IMPELLOR
4. HOSE CONNECTOR 5. MOTOR
1. Disconnect the power cord from the power supply
before performing maintenance.
2. Remove from water, detach tubing/ fountain kit and
remove front cage from pump.
3. Remove the impellor cover by either turning anti-
clockwise and pulling out or pulling tab to unclip
(depending on model).
4. Gently remove the impellor and shaft, use long nose
pliers if needed. Take care not to break ceramic shaft
(if applicable) because they are brittle.
5. Clean impellor, checking for any signs of wear or
damage.
6. Reinstall the shaft, and then carefully slide the
impellor onto the shaft. The impellor will pull itself in
by magnetic force, this is normal (take care not to
pinch your fingers).
7. Replace the impellor cover making sure the shaft is
located properly on the impellor cover.
8. Replace the front cage.
9. Re-attach tubing/fountain kit, submerse in water,
connect to power supply and turn on.
MAINTENANCE
PART DESCRIPTION
DISCONNECT POWER CORD FROM THE POWER SUPPLY BEFORE PERFORMING
MAINTENANCE. NEVER LIFT THE PUMP BY THE POWER CORD.
4
1
3
52
NOTE:
PLEASE CONSULT YOUR RETAILER
FOR QUALITY ORIGINAL AQUAPRO
REPLACEMENT PARTS FOR YOUR
AQUAPRO PRODUCT.
VISIT WWW.AQUAPROONLINE.COM.AU FOR
NEAREST STOCKISTS.
AP550 IMAGE SHOWN FOR ILLUSTRATION PURPOSES ONLY
AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 3AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 3 2/5/2022 11:32 am2/5/2022 11:32 am

WWW.AQUAPROONLINE.COM.AU
HOTLINE    PHONE +   
EMAIL [e-mail]
IMPORTANT SAFEGUARDS WARRANTY
WARRANTY COVERS ONLY APPLIANCE
DEFECTS, FAULTY MATERIAL AND
WORKMANSHIP WITHIN A 2 YEAR PERIOD.
TO GUARD AGAINST INJURY, BASIC SAFETY
PRECAUTIONS SHOULD BE OBSERVED
INCLUDING:
• Faults arising due to; accidents, misuse, not
following manufacturer’s guidelines/instructions, or
power surges/spikes/brownouts will not be covered.
• The impellor set is a consumable item and is
therefore not covered under warranty.
• Warranty will be void if any tampering, removal of
warranty labels, or electrical circuitry is evident.
• Warranty will be void if the power cord is cut or
damaged in any way.
• Warranty will be void if any visible signs of
overheating are present.
• Loss of livestock, damage to property or personal
injury caused by this product will not be covered.
• Warranty claims caused by installation faults will not
be covered.
• It is the customer’s responsibility to return the faulty
appliance for any warranty claim to Aquatec.
• For any warranty to be valid, an original proof of
purchase must be provided.
• Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure
does not amount to a major failure.
FOR MORE INFORMATION AND THE
COMPLETE AQUAPRO RANGE
VISIT WWW.AQUAPROONLINE.COM.AU
• The pump should only be used in clean water. Do
not use the pump in any solvent or gasoline that is
flammable.
• Do not operate the pump without water at any time,
permanent damage may occur.
• Do not operate the pump if the pump or any of the
components of the pump, such as the power cable,
have been damaged.
• The drip loop method should be used to prevent
water from traveling down the cord onto the plug
or power point. If the plug does get wet, do not
unplug the cord. Disconnect the circuit breaker
that supplies power to the power point. Then unplug
and examine the plug and power point for presence
of water. If the power point has become wet, you
should consult an electrician before using the power
point again.
• Always use a properly grounded power supply
that is connected to an RCD with a rated residual
operating current not exceeding 30mA. As per AS/
NZS 3350.2.41:1997.
• Always unplug the pump from the power supply
when not in use or before performing any
maintenance on the pump. Never pull the cord to
disconnect the plug from the power supply. Grasp
the plug and pull to disconnect.
• Do not install or store the pump where it will be
exposed to extreme hot or cold temperatures.
• Do not cut the cord as this will result in voiding your
warranty.
• Care should be taken to arrange the power cord so
that it cannot be accidentally tripped over or pulled.
• Do not attempt to repair the pump yourself. Return
to an authorised service centre or place of purchase
if a fault occurs.
• Do not use in water above 35°C.
AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 4AQUAPRO AP200LV/AP210/AP550/AP750LV Instructions.indd 4 2/5/2022 11:32 am2/5/2022 11:32 am