Aquatec AquaPro All in One 2000 User manual

AQP All in One 2000 Instructions.indd 1 23/09/2015 6:35 am

Transformer Voltage Power
Consumption*
UV-Clarifier
Power
Max
Head
Water
Flow
IP Rating
Transformer
IP Rating
Pump & UVC
Outlet Thread
Size
240V ˜ 12V 12V 72W 9W 2M 2000 L/H IP44 IP68 1/2 INCH MALE
AQP All in One 2000 Instructions.indd 2 23/09/2015 6:35 am

AQP All in One 2000 Instructions.indd 3 23/09/2015 6:35 am

AQP All in One 2000 Instructions.indd 4 23/09/2015 6:35 am

AQP All in One 2000 Instructions.indd 5 23/09/2015 6:35 am

Problem Reason Solution
Water Pump Not
Working No Power Check that the plug is connected
and turned on
Sponges and filter media
blocked with sludge Clean the sponges and filters
Impellor is blocked with
sludge or limescale
Clean the Impellor as per
the instructions
Running without sucient water Submerse the equipment underwater
then plug in. Refill if necessary.
Blocked Impellor chamber or ceramic
shaft is broken
Clean the Impellor. Check for ware.
Replace if necessary.
Water Pump is noisy Blockage in pump Clear the blockage
Impellor & Shaft worn out Replace Impellor & Shaft
Impellor broken Replace Impellor
Water valve closed on the outlet Open the valve and allow
water to flow
Unit inlet is blocked or the water
pump inlet is blocked Clear all blockages
UVC Lamp not
working
UVC Globe blown or
Quartz Sleeve broken Replace as necessary
Connection of the UVC Globe
not sucient
Push UV Globe in firmly until you
hear a click sound
Description Product Code
Impellor & Shaft 11AQ111
Low Voltage UV Globe 9W 11AU177
Quartz Glass Sleeve 11AQ211
Sponge Filter 11AQ311
Complete Fountain Kit 11AQ411
12V Transformer 72VA 04ST072
AQP All in One 2000 Instructions.indd 6 23/09/2015 6:35 am

AQP All in One 2000 Instructions.indd 7 23/09/2015 6:35 am

AQP All in One 2000 Instructions.indd 8 23/09/2015 6:35 am