For applications where normal digital media locker operation requires an
independent 12v battery (Boat, RV), power down the AQ-DM-1R via the
RF Remote. This will insure against independent battery drain. Other
applications using 12V power converters are no problem.
RF Wireless Remote Synchronizing
Each digital media Locker comes with a matching RF Wireless LCD Remote to
maximize wireless performance. The AQ-DM-R1 has the ability to be
controlled by more than one RF wireless remote. To take advantage of this
feature, you will need to purchase one additional RF Remote and use the
following steps to activate/Synchronize the new remote to the AQ-DM-1R.
1. Turn on the Digital Media Locker and the Wireless RF Remote
2. Press and hold the “synchronizing” button for 2 seconds.
3. The LCD will show “----“ (Bob needs to confirm)
4. When the “synchronizing” is complete, the LCD will return to the
original screen setting.
5. The Digital Media Locker can host unlimited Aquatic AV RF Wireless
LCD’s Remotes as long as all are properly syncorized.
To Replace Remote Battery
