Aquatica Digital Lullaby Mini User manual

www.aquaticabath.com
E: [email protected]
Lullaby Mini
AquateX™Bathtub
(formerly Aquastone™)
Installation & Care Manual
USA & Canada

www.aquaticabath.com
E: [email protected]
Lullaby Mini
AquateX™ Bathtub
55.125”
Ø2.0”
Use Male Adapter Spg x MIPT
- ABS DWV for Aquatica®bath wastes
with Sch40 Waste Fitting
Thread 1½ NPSM ( 1½ IPS)
P-Trap
(not supplied)
Male Adapter Spg x MIPT - ABS DWV
for Aquatica®bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)
Male Adapter Spg x MIPT - ABS DWV
for Aquatica®bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)
Aquatica®Freestanding
Bath Installer™
(not supplied)
Sch40
Waste Fitting
1½“ flanged brass
tube for Aquatica®
cable-drive and
concealed bath
wastes.
PLEASE NOTE: Parts marked with are supplied as part of Aquatica®Freestanding Bath Installer™ Kit (NOT included with bathtub)
17.75”
0.375”
25.625”
17.50”
27.50”
2.00”
MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
A
A
A - A
3.125”
52.375”
41.50”
39.125”
18.875”
16.25”
23.75”
Slope: 0.25” - 0.50” per foot

MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
MaleAdapter Spg x MIPT - ABS DWV
forAquatica®bath wastes with
Sch40hub outlet.
Thread:1 ½ NPSM (1 ½ IPS)
12
HANDLE
WITH CARE
DO NOT
DROP
The Male Adapter Spg x MIPT - ABS DWV for Aquatica®bath wastes with Sch40 Waste Fitting
and Aquatica®Freestanding Bath Installer™ are not included with bathtub.
Male Adapter
Spg x MIPT
- ABS DWV
- available for
purchase separately
1 ½ " flanged
brass tube - available for
purchase separately
Sch40
Waste Fitting
Aquatica®
Freestanding
Bath Installer™
in the floor
- available for
purchase
separately
P-Trap - not
included
!
!
4
Installation is completed by applying
silicone at several points between
the bottom panel and floor.
3
Lullaby Mini
AquateX™ Bathtub

www.aquaticabath.com
E: [email protected]
TYPICAL FREESTANDING BATHTUB INSTALLATION PROCEDURE
Before you start:
• Ensure that the floor is even.
• The waste-overflow fitting is supplied with the product, however other accessories like the slip joint
and adaptors are not included and must be purchased separately.
• Because of the technical features of the product, it should be used only with the supplied waste-
overflow or specific 3rd party models that have been tested and approved by us.
• Place the bathtub by raising it up 4” with 4x4 pieces of lumber so you can have access from the
bottom of the bathtub.
INSTALLATION SEQUENCE
• The Lullaby Mini bathtub is equipped with factory pre-installed overflow system.
• The waste pipe/p-trap connection must be made directly to the waste/drain outlet located
at the bottom of the tub.
• Picture 1-2: the bathtub is leveled via a water level at the intended local installation area.
• Picture 3: place the bathtub by raising it up 4” with 4x4 peices of lumber so you can have access
from the bottom of the bathtub. Important note: during the installation, the bathtub should not be
turned on its side to prevent its weight from deflecting its monobloc sides. This is why it is important
to use supports to raise the bathtub above the floor. This will also provide you with easy access to the
internal plumbing parts.
Lullaby Mini
AquateX™ Bathtub
1 2 3

Lullaby Mini
AquateX™ Bathtub
INSTALLATION SEQUENCE continued
• Picture 4: the water outlet pipe should be connected.
• Picture 5: foot leveling lock nuts are adjusted.
• Picture 6: silicone is applied to the feet of the bathtub that stands on the floor.
• Picture 7: when the installation is completed, the bathtub is taken down from the supports
( ie 2 x 4x4's). If necessary, installation is completed by applying silicone at several points between
the bottom panel and floor.
Compatible adaptors for adapting a threaded male connection to a solvent weld connection:
• Mueller Industries: Part # 05913
Or
• Nibco: C4803
http://www.homedepot.com/p/NIBCO-1-1-2-in-PVC-DWV-Hub-x-FIPT-Female-Adapter-C4803HD112/100677994
The adaptor must have the appropriate thread type or it will keep slipping and you will not be able to get
a tight connection!
Male Adapter Spg x MIPT - ABS DWV
for Aquatica®bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)
45
76
Use Male Adapter
Spg x MIPT
- ABS DWV for Aquatica®
bath wastes with
Sch40 Waste Fitting
Thread 1½NPSM
(1½IPS)
Please refer to our
kit installation guide
on page 6

www.aquaticabath.com
E: [email protected]
Aquatica®
Freestanding Bath Installer™
(Kit available separately - not included with bathtub)
178
"
48mm
9
3
8
"
238mm
2"
52mm
114
"
32mm
418
"
103mm
614
"
159mm
112
"
39mm
112
"
38mm
8"
203mm
8"
203mm
112
"
38mm
1 ½ " brass tube for female threaded
stone bath wastes.
1 ½ " flanged brass tube for Aquatica®
cable-drive and concealed bath wastes.
112
"
38mm
8"
203mm
8"
203mm
112
"
38mm
1 ½ " brass tube for female threaded
stone bath wastes.
1 ½ " flanged brass tube for Aquatica®
cable-drive and concealed bath wastes.
FEATURES
• 18 Gauge Epoxy coated Metal Deck Flange
• Designed to be installed in an 8” joist space
• Can be installed with Waterproofing Membrane
(*bronte™ NobleSeal TS Recommended)
• CSA Certified for Canadian and US markets
KIT INCLUDES
• 2 Brass tailpieces (Fine Thread and Flanged)
• Freestanding Bath Installer™ assembly
with 1-1/2” DWV ABS tailpiece
• Cutting template
INSTALLATION TIPS
• Use 6.5” hole saw to cut sub floor (not included).
Cutting template included
• Do not cut the brass tailpiece as this may cause a leak
• Secure Deck Flange with 6 screws (not included)
Male Adapter Spg x MIPT - ABS DWV
for Aquatica®bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)

INSTALLATION INSTRUCTIONS
Attaches to Freestanding Bath W/O
A. Cut 6½” (16.5 cm) hole into wood sub-floor
(use supplied Cutout Template).
B. Measure and cut ABS Tailpiece as necessary
to ensure a secure connection to P-Trap below.
C. Insert Freestanding Bath Installer™ assembly
into floor opening and connect to Pipe below.
D. Affix to sub-floor with 6 screws (not supplied)
A. Install flooring surface, leaving a 6½”
opening to access Drain.
B. Affix the appropriate brass Tailpiece to the Waste
& Overflow. NOTE: DO NOT CUT THE BRASS
TAILPIECE AS THIS MAY CAUSE
A LEAK.
Ensure the measurement between the base of
the Drain and P-Trap will accomodate the Tail-
piece.
A. Cut out the Installation Label with a utility knife and
remove to expose the Drain.
B. Apply lubricant (supplied) to the Tailpiece.
C. Position the Tub and brass Tailpiece in-line with the
Drain.
D. Carefully lower the tub with the installed brass Tail-
piece into the Red Collar in Drain assembly. Ensure
Tailpiece is fully engaged with Seal.
Aquatica®
Freestanding Bath Installer™
(Kit available separately - not included with bathtub)
1
2
3
IMPORTANT: Do not remove Installation Label until Step 3.
DO NOT CUT THE SUPPLIED BRASS TAILPIECE. Doing so may cause a leak.
Disassembling the drain or cutting the Tailpiece will void the warranty.

www.aquaticabath.com
E: [email protected]
www.aquaticaplumbing.com
E: [email protected]
Maintenance Instructions
The smooth surface of your Purescape®
AquateX™ Bathtub accumulates hardly any
dirt, and can be maintained by simply cleaning
with a soft cloth, using a mild detergent in
water, then wiping over with a dry cloth.
Avoid using abrasive cleansers or solvents,
which will cause damage to the surface.
Damage caused by use of these products, or
any other inappropriate treatment, is not
covered by our guarantee.
Инструкция по уходу
Поверхность легко чистится. За счет
гладкости грязь к ней не прилипает. Для
регулярного ухода используйте мягкую
ткань, мыльный раствор и воду. После
чистки вытирайте поверхность сухой тканью,
которая хорошо впитывает влагу.
Не используйте губки с абразивной
поверхностью и агрессивные растворители,
которые могут повредить ванну.
Повреждения, возникшие вследствие
неправильного ухода, не покрываются
гарантией.
Installation & Entretien
Cette surface est facile à entretenir et à nettoyer.
Sa surface particulièrement lisse, ne retiens que
très peu la saleté. Un entretien quotidien
nécessite simplement l’utilisation d’un chiffon
doux, de l’eau et un peu de savon. Essuyer avec
un chiffon sec. L’utilisation de détergents ou de
solvant endommageraient cette surface.
Les dommages resultants d’un traitement non
conforme effectué par l’utilisateur sont exclus de
la garantie que nous offrons.
Manuale per il corretto mantenimento
La superficie necessita di pulizia ed
accorgimenti per il corretto mantenimento.
Una superficie liscia non accumula lo sporco.
Usare una spugnetta con del detergente non
aggressivo per una pulizia regolare. Asciugare
con un panno. Evitare l’uso di solventi o
materiali abrasivi: potrebbero rovinare la
superficie.Un danno causato da trattamento
inappropriato non verra’ coperto dalla garanzia.
Instrucciones para la correcta manutención
La superficie debe de ser limpiada y
adecuadamente mantenida. Una superficie lisa
no acumula suciedad.
Utilice una esponja con un detergente suave
para la limpieza diaria. Seque con un paño.
No utilice disolventes o materiales abrasivos ya
que podrían dañar la superficie.
Los daños causados por el tratamiento
inadecuado no serán cubiertos por la garantía.
Lullaby Mini - Maintenance Instructions
Lullaby Mini - Инструкция по уходу
Lullaby Mini - Installation & Entretien
Lullaby Mini - Manuale per il corretto mantenimento
Lullaby Mini - Instrucciones para la correcta manutención