Aquatica Digital Purescape 503 User manual

www.aquaticaplumbing.com
E: [email protected]
Purescape™503
Freestanding Stone Bathtub
Installation & Care Manual
USA and CANADA

www.aquaticaplumbing.com
E: [email protected]
Use Male Adapter Spg x MIPT
- ABS DWV for Aquatica bath wastes
with Sch40 Waste Ftting
Thread 1¹
/₂ NPSM (1¹ /₂ IPS)
P-Trap
(not supplied)
Purescape 503™
Freestanding Stone Bathtub
Male Adapter Spg x MIPT - ABS DWV
for Aquatica bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)
Male Adapter Spg x MIPT - ABS DWV
for Aquatica bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)
Aquatica® Freestanding
Bath Installer™
(not supplied)
Sch40
Waste Fitting
16.62”
3.38”
5.38”
38.62”
25.62”
35.38”
19.62”
4.38”
14.12”
Ø 2”
Ø 3.38”
21.25”
15.75”
Ø 2”
35.38”70.88”
1¹/₂“ flanged brass
tube for Aquatica
cable-drive and
concealed bath
wastes.
PLEASE NOTE: Parts marked with are supplied as part of Aquatica® Freestanding Bath Installer™ Kit (NOT included with bathtub)

1
2
3 USA & CANADA INSTALL
HANDLE
WITH CARE
DO NOT
DROP
Male Adapter
Spg x MIPT
- ABS DWV
- available for
purchase separately
1 ½ " flanged
brass tube - available for
purchase separately
The Male Adapter Spg x MIPT - ABS DWV for Aquatica bath wastes with Sch40 Waste Fitting
and Aquatica® Freestanding Bath Installer™ are ot included with bathtub.
!
!
Sch40
Waste Fitting
Aquatica®
Freestanding
Bath Installer™
in the floor
- available for
purchase
separately
P-Trap - not
included
4
Installation is completd by applying silicone
at several points between the bottom
panel and floor.
3.38”
14.12”
Ø 2”
Ø 3.38”
Purescape 503™
Freestanding Stone Bathtub

Aquatica®
Freestanding Bath Installer™
(Kit available separately - not include with bathtub)
178
"
48mm
9
3
8
"
238mm
2"
52mm
114
"
32mm
418
"
103mm
614
"
159mm
112
"
39mm
112
"
38mm
8"
203mm
8"
203mm
112
"
38mm
1 ½ " brass tube for female threaded
stone bath wastes.
1 ½ " flanged brass tube for Aquatica
cable-drive and concealed bath wastes.
112
"
38mm
8"
203mm
8"
203mm
112
"
38mm
1 ½ " brass tube for female threaded
stone bath wastes.
1 ½ " flanged brass tube for Aquatica
cable-drive and concealed bath wastes.
FEATURES
• 18 Gauge Epoxy coated Metal Deck Flange
• Designed to be installed in an 8” joist space
• Can be installed with Waterproofing Membrane
(*bronte™ NobleSeal TS Recommended)
• CSA Certified for Canadian and US markets
KIT INCLUDES
• 2 Brass Tailpieces (Fine Thread and Flanged)
• Freestanding Bath Installer™ assembly with 1-1/2” DWV
ABS tailpiece
• Cutting template
INSTALLATION TIPS
• Use 6.5” hole saw to cut sub floor (not included). Cutting template
included
• Do not cut the brass Tailpiece as this may cause a leak
• Secure Deck Flange with 6 screws (not included)
Male Adapter Spg x MIPT - ABS DWV
for Aquatica bath wastes with
Sch40 hub outlet.
Thread: 1 ½ NPSM (1 ½ IPS)

INSTALLATION INSTRUCTIONS
Attaches to Freestanding Bath W/O
A. Cut 6-1/2” (16.5 cm) hole into wood sub-floor
(use supplied Cutout Template).
B. Measure and cut ABS Tailpiece as necessary
to ensure a secure connection to P-Trap below.
C. Insert Freestanding Bath Installer™ assembly into floor
opening and connect to Pipe below.
D. Affix to sub-floor with 6 screws (not supplied)
A. Install flooring surface, leaving a 6-1/2” opening to
access Drain.
B. Affix the appropriate brass Tailpiece to the Waste &
Overflow. NOTE: DO NOT CUT THE BRASS TAILPIECE
AS THIS MAY CAUSE A LEAK.
Ensure the measurement between the base of the
Drain and P-Trap will accomodate the Tailpiece.
Other lengths available from ???????????.
A. Cut out the Installation Label with a utility knife and
remove to expose the Drain.
B. Apply lubricant (supplied) to the Tailpiece.
C. Position the Tub and brass Tailpiece in-line with the Drain.
D. Carefully lower the tub with the installed brass Tailpiece
into the Red Collar in Drain assembly. Ensure Tailpiece is
fully engaged with Seal.
Aquatica®
Freestanding Bath Installer™
(Kit available separately - not include with bathtub
1
2
3
IMPORTANT: Do not remove Installation Label until Step 3.
DO NOT CUT THE SUPPLIED BRASS TAILPIECE. Doing so may cause a leak.
Disassembling the drain or cutting the Tailpiece will void the warranty.

www.aquaticaplumbing.com
E: [email protected]
LV
Pind vajab puhastamist ja hooldust. Siledale pinnale ei kogune
mustus kergelt.
Kasuta pehmet kangast, pesuvahendit ja vett regulaarseks
hoolduseks. Puhasta kuiva kangaga.
Väldi abrasiive või lahusteid, mis võiks pinda kahjustada.
Mitte korrektes hoolduse käigus tekitatud vigastused
ei kuulu garantii alla.
EST
Hooldus juhend
Hooldus juhend
LV/LT/RU/PL/EST/EN/DE/FR/IT
max. 60°C
PAA Ltd.,
Unijas street 12A, Riga, Latvia
13
EN 14516
CL1
CA-DA
PAA-BT-SILKS-19/2013
Maintenance Instructions
The smooth surface of your Aquatica® Aquastone™
Bathtub accumulates hardly any dirt, and can be
maintained by simply cleaning with a soft cloth,
using a mild detergent in water, then wiping over
with a dry cloth.
Avoid using abrasive cleansers or solvents, which
will cause damage to the surface. Damage caused
by use of these products, or any other
inappropriate treatment, is not covered by our
guarantee.
Инструкция по уходу
Поверхность легко чистится. За счет гладкости
грязь к ней не прилипает. Для регулярного
ухода используйте мягкую ткань, мыльный
раствор и воду. После чистки вытирайте
поверхность сухой тканью, которая хорошо
впитывает влагу.
Не используйте губки с абразивной
поверхностью и агрессивные растворители,
которые могут повредить ванну.
Повреждения, возникшие вследствие
неправильного ухода, не покрываются
гарантией.
Installation & Entretien
Cette surface est facile à entretenir et à nettoyer.
Sa surface particulièrement lisse, ne retiens que
très peu la saleté. Un entretien quotidien nécessite
simplement l’utilisation d’un chiffon doux, de l’eau
et un peu de savon. Essuyer avec un chiffon sec.
L’utilisation de détergents ou de solvants
endommageraient cette surface.
Les dommages resultants d’un traitement non
conforme effectué par l’utilisateur sont exclus de
la garantie que nous offrons.
Manuale per il corretto mantenimento
La superficie necessita di pulizia ed accorgimenti
per il corretto mantenimento. Una superficie liscia
non accumula lo sporco. Usare una spugnetta con
del detergente non aggressivo per una pulizia
regolare. Asciugare con un panno. Evitare l’uso di
solventi o materiali abrasivi: potrebbero rovinare la
superficie.
Un danno causato da trattamento inappropriato
non verra’ coperto dalla garanzia.
Instrucciones para la correcta manutención
La superficie debe de ser limpiada y
adecuadamente mantenida. Una superficie lisa no
acumula suciedad.
Utilice una esponja con un detergente suave para la
limpieza diaria. Seque con un paño.
No utilice disolventes o materiales abrasivos ya que
podrían dañar la superficie.
Los daños causados por el tratamiento inadecuado
no serán cubiertos por la garantía.
Purescape 503™- Maintenance Instructions
Purescape 503™ - Инструкция по уходу
Purescape 503™- Installation & Entretien
Purescape 503™- Manuale per il corretto mantenimento
Purescape 503™- Instrucciones para la correcta manutención