aRacer bLink2 User manual

bLink2 User Manual
Speed Tuning Super
& RCmini5 Flash Tool
aRacer APP
1. System Descriptions
2. Connect to RC Super ECU by blink2
2.1 Open SpeedTuning Super and Click to search
bLink module
Note：
•Suggest the connection distance between bLink and
ECU < 5M
•Minimum voltage of vehicle >11.5V
•Special ECU model need to wait 5 sec to link.
•Use bLink to flash ECU, the process will take much time.
•bLink and iLink can not link with ECU at the same time.

2.2 Double click bLink module to link.
Default paired number：0000
2.3 SpeedTuning Super linked with RC super ECU
3. Connect to RCmini5 ECU by blink2
3.1 Open RCmini5 Flash Tool and Click to
search bLink module
3.2 Double click bLink module to link.
Default paired number：0000

3.3 RCmini5 Flash Tool linked with RCmini5 ECU
4. aRacer Smart
4.1 Download aRacer Smart from Google Play
Store or Apple APP Store and install aRacer Smart.
4.2 Open ①the main menu and click ②Settings
4.3 Click ③the Scan of devices button. Select ④the
bLink module and ⑤Fill in the default pair number
(0000) and ⑥click OK .
①
②
③
④
⑥
⑤

5.1 Bluetooth status indicator ：
Flash：Unlink
Double flash：Link
5.2 ECU link status indicator：
Red light on：ECU and bLink2 link
Red Light flash quickly(5Hz)：ECU (RC Super、RCmini
Plus2、RCmini5) and bLink2 unlink
Red Light flash slowly(2Hz)：ECU (RC1、RCmini Plus、
RCmini 4C) and bLink2 unlink
5. bLink Indicator Light Descriptions
Bluetooth status indicator
(Blue)
ECU link status indicator
(Red)
⑧
⑦
⑦click the back button then ⑧aRacer Smart
linked with RCmini5.

6. bLink Firmware Update
6.1 Download the bLink Flash Tool from aRacer
Speedtek website. (http://www.aracer-speedtek.com)
And install the bLink Flash Tool.
6.2 Open bLink Flash tool. Click ①download the
firmware and click ②to search bLink module
6.3 Select the ③bLink module
6.4 Check the ④Device Name and put new PIN Code
(XXXX) of bLink module. Select ⑤Target ECU and
click ⑥
6.5 Click ⑦to flash bLink module
②
①
③
④
⑤
⑥
⑦