ARAG Visio User manual
Software rel. 2.3.x
VOLUME COUNTER VERSION
2
CONTENTS
3
INTRODUCTION ............................................................................................................ 4
4
INTENDED USE.............................................................................................................4
CONTENT OF THE PACKAGE ..................................................................................... 4
PRECAUTIONS .............................................................................................................4
RISKS AND PROTECTIONS BEFORE ASSEMBLY .................................................... 5
5
5
ASSEMBLY DIAGRAMS ............................................................................................... 6
CONTROLS IN THE MENU ........................................................................................... 7
7
8
9
MENU STRUCTURE.................................................................................................... 10
PRELIMINARY SETUP FOR USE ............................................................................... 11
11
12
13
15
16
17
18
18
19
20
21
23
USE ..............................................................................................................................25
25
MAINTENANCE / DIAGNOSTICS / REPAIRS ............................................................ 26
26
END OF LIFE DISPOSAL............................................................................................ 26
TECHNICAL DATA ...................................................................................................... 27
27
28
GUARANTEE TERMS ................................................................................................. 29
3
=
=
This manual is an integral part of the equipment to which it refers and must accompany
the equipment in case of sale or change of ownership. Keep it for any future reference;
ARAG reserves the right to modify product specications and instructions at any moment
and without notice.
4
INTRODUCTION
INTENDED USE
CONTENT OF THE PACKAGE
1
2
3
4
PRECAUTIONS
5
RISKS AND PROTECTIONS BEFORE ASSEMBLY
1) Set mounting rail in cabin and fasten it
with the relevant screws (1), in a position
where VISIO can be easily seen and at
hands' reach, but away from any moving
organs.
2) Secure VISIO to rail and push down
until locked in place.
3) Fasten wiring so that it does not
interfere with any moving parts.
POWER IS SWITCHED OFF; DISCONNECT POWER CABLES IF NEEDED.
power supply
sensors
6
ASSEMBLY DIAGRAMS
Counting abort
Ground
connection
(green wire)
Counting abort
Connection
+12VDC
(yellow wire)
3
+12Vdc
GND
7
CONTROLS IN THE MENU
OKESC
8
SWITCHING ON
A
B
SWITCHING OFF
A
ACCESS TO SETUP MENU
SELECTION AND ACCESS
TO MENU ITEMS
A
B
9
EDITING A VALUE
A
B
C
D
l
2
1
0.0
l
0.00
0.00
l/min
10
MENU STRUCTURE
11
PRELIMINARY SETUP FOR USE
OK
OFF
12
OK
13
Automatic calibration
OK
Stabilization
1
2
14
OK
OK
Stop flow!
Manual calibration
OK
[quantity measured by equipment]
[actually sprayed quantity]
x [constant indicated on flowmeter body]
15
.
Options
Language
English
Units of measurem.
Display contrast
.
OK .
21
2
Language
English
Česk
Deutsch
Español
.
OK ESC
16
Flowrate units of measurement
OK
OK ESC
Volume units of measurement
OK
OK ESC
17
OK
OK ESC
18
OK
OK ESC
OK
OK ESC
19
1
2
OK
OKESC
OKESC
20
OK
OK ESC
OK
OK
THE SET OPERATING MODE.
Other manuals for Visio
3
This manual suits for next models
2
Table of contents
