Araknis Networks AN-ACC-INJ-POE-30W User manual

Features and Specifications
• Built-in mounting tabs with included screws and anchors.
• 802.3af/at compliant; automatically detects and provides the
required voltage and power for compliant devices.
• Gigabit Ethernet ports support full duplex 10/100/1000Mbps
• Power Input: 100-240V AC, 50-60Hz, 0.8A
• PoE Output: 54V 0.6A DC, 30W max
• Operating Temperature: -4 to 104° F (-20 to 40° C)
Installation
Mount injector and connect Ethernet cables, then connect power.
PWR LED = solid green when powered on.
1. PoE device output
2. LAN cable input
3. AC power inlet
4. Mounting screws and anchors
5. PWR LED
Quick Start Guide
AN-ACC-INJ-POE-30W
Gigabit PoE+ Injector
Page 1/2©2016 Araknis Networks®
1 2 3 4 5

FCC Warning
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates and
radiates radio frequency energy and, if not installed and used in
accordance with the user’s manual, it may cause interference in
which case users will be required to correct interference at their
own expenses.
CE Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user may
be required to take adequate measures.
Warranty
Araknis Networks® products have a 2-Year Limited Warranty.
This warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal
conditions of use. This warranty shall not apply to products
which have been abused, modified or disassembled. Products to
be repaired under this warranty must be returned to SnapAV or a
designated service center with prior notification and an assigned
return authorization number (RA).
Technical Support
Phone: [phone]
Email: [e-mail]
Page 2/2 160923-1011©2016 Araknis Networks®