ARC Lighting Tiny Monster Xtreme Series User manual

SKU# 61022 INSTALL MANUAL WWW.ARC.LIGHTING
1
WHAT’S INCLUDED:
§ 2 X Light Bars
§ Side and Bottom Mount Brackets & Hardware
§ 1 X Wiring Harness w/ Toggle Switch
(SKU# 84002)
61022
XTREME SERIES BAR
10” STREET LEGAL DRIVING LIGHT BAR
FEATURES & SPECIFICATIONS:
§ LIGHT OUTPUT: 4600 Lumens (Per Light)
§ POWER: 80W @ 13.6V DC
§ VOLTAGE: 10 - 36V DC
§ DIMENSION: 10.1 x 2.3 x 1.6"
§ BEAM PATTERN:
Driving Beam (Auxiliary High Beam)
§ COMPLIANCE: SAE J581
MOUNTING INSTALL INSTRUCTION

SKU# 61022 INSTALL MANUAL WWW.ARC.LIGHTING
2
HARNESS INSTALL INSTRUCTION
1. Determine suitable mounting locations to install the LED light bars, wiring harness and switch. Once
all mounting locations are confirmed, connect the wires as shown above. Proper insulation at
connections is required.
2. Connect positive and negative wire properly. Press the switch button to test if the lights are
functioning properly.
3. Adjust the light to the desired angle and then secure by tightening all mounting screws.