
10 / EN Tea Maker / User Manual
3.1 First operation
Place the product on a flat
and dry surface. Plug the
appliance. Remove the kettle
(5) from the base unit (7) af-
ter lifting the teapot (2).
Fill the kettle (5) with water
up to the max. line and place
it on the base unit (7). Move
the on / off switch (6) to the
ON (I) position by lifting it up
slightly.
Turn the boiling / keeping hot
switch (4) to the boiling ( )
position. After the water
boils, the boiling / keep-
ing hot switch automatically
switches to the keeping hot
() position. Pour the boil-
ing hot water and shake the
inside again with water.
3.2 Start Up
Remove the kettle (5) from
the base unit (7) after lifting
the teapot (2).
Fill the kettle (5) with water
up to the max. line and place
it on the base unit (7).
Open the teapot lid (1). Re-
move the tea filter (3) inside
the teapot (2).
3Utilisation