arcelik A35010 User manual

Elektrikli Scooter
Kullanma Kılavuzu
01M-9950191100-1522-01
EN - TR
A35010

Please read this user manual first!
Dear Valued Customer,
Thank you for preferring this Arçelik appliance. We hope that you get the best results
from your appliance which has been manufactured with high quality and state-of-
the-art technology. For this reason, please read this entire user manual and all other
accompanying documents carefully before using the appliance and keep it as a
reference for future use. If you handover the appliance to someone else, give the user
manual as well. Follow the instructions by paying attention to all the information and
warnings in the user manual.
Remember that this user manual may also apply to other models. Differences between
models are explicitly described in the manual.
Meanings of the Symbols
Following symbols are used in various sections of this user manual:
CImportant information and useful hints about
usage.
AWARNING: Warnings against dangerous situa-
tions concerning the security of life and property.
WARNING: Warning for danger of fire.
BWARNING: Warning for electric shock.
This appliance has been produced in environmentally friendly facilities without harming the nature.
Complies with the WEEE regulation. It does not contain PCB.

3 / EN
Electric Scooter / User Manual
CONTENTS
1 Important safety and
environmental instructions 4
1.1 General safety . . . . . . . . . . . . . . . . . . . . 4
1.2 Compliance with the WEEE Directive and
Disposing of the Waste Product:. . . . . . . . . . . 8
1.3 Compliance with RoHS Directive . . . . . . . 8
1.4 Package Information . . . . . . . . . . . . . . . . 8
1.5 Information on Waste Batteries . . . . . . . . 8
2 General appearance 9
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Technical data. . . . . . . . . . . . . . . . . . . . 10
3 Installation of appliance 12
3.1 Assembling the device. . . . . . . . . . . . . . 12
3.2 Unfolding and folding the scooter. . . . . . 12
3.2.1 Unfolding the scooter . . . . . . . . . . . . . 12
3.2.2 Folding the scooter . . . . . . . . . . . . . . 13
4 Preparation 14
5 Charging 15
5.1 Charging . . . . . . . . . . . . . . . . . . . . . . . 15
5.2 Regarding battery charging . . . . . . . . . . 16
5.3 Warnings . . . . . . . . . . . . . . . . . . . . . . . 16
6 Operation of the appliance 17
6.1 Intended use. . . . . . . . . . . . . . . . . . . . . 17
6.2 Vehicle operating instructions . . . . . . . . 17
6.2 Front and back LED light . . . . . . . . . . . . 17
6.3 Safe riding . . . . . . . . . . . . . . . . . . . . . . 17
6.4 Electric scooter safe parking . . . . . . . . . 19
6.5 Safe transportation . . . . . . . . . . . . . . . . 19
7 Cleaning and maintenance 20
7.1 Battery maintenance . . . . . . . . . . . . . . . 20
7.2 Bearings, screws, brakes and wheels. . . 20
7.3 Storage and cleaning . . . . . . . . . . . . . . 21
8 Troubleshooting 22

4 / EN Electric Scooter / User Manual
1 Important safety and environmental instructions
1.1 General safety
IMPORTANT: Read the user man-
ual carefully before using the ap-
pliance and keep it as a reference
for future use.
WARNING: First, learn safe riding
before you ride the Electric scoot-
er. We recommend always wear-
ing helmet and protective gear like
elbow, knee and wrist protectors
to ensure your personal safety.
Also make sure you have read the
user manual carefully, to ensure
you know how to ride it in a safe
way.
WARNING: Due to the laws of
some countries, there is a min-
imum age limit to use this prod-
uct and you must have a driver’s
license. In this type of situation
purchased. Make sure that you
meet the legal requirements of the
country you are in to use the vehi-
cle you are in.
•It is not a highway vehicle, do not
use it on highways.
•It is your responsibility to be
aware of and comply with all reg-
ulations in the country which you
aim to drive in. Please also check
which roads are allowed to drive
Electric scooter in the country. If
there are no regulations for this
Electric scooter in your country,
please take care of your own
safety and the safety of others.
•Also pay attention to other peo-
ple. Always ride safely and only
at a speed that allows you to
brake safely at any time. A com-
mon thing for such products is
that there is a risk that you may
fall off the product and injure
yourself. Always ride as safely as
possible.
•If lending the electric scooter to
friends and family, please make
sure they use proper protective
gear and know how to ride it.
•Before riding the electric scooter,
please check that all parts are
working as supposed to. If any
loose parts, abnormal noise,
reduced battery life etc. are
detected, please contact your
retailer for product service and
warranty. Do not repair the elec-
tric scooter yourself.
•Inspect the rear tire, rear brake,
and brake pad according to

Electric Scooter / User Manual 5 / EN
1 Important safety and environmental instructions
Section 7 of the maintenance
specification in this operation
instructions. The electric scooter
may become unstable if the rear
brake is deformed or loose. This
is because the distance between
the brake pad and the rear wheel
becomes too small, possibly
leading to a blocked rear wheel.
•Avoid applying too much force or
stepping on the rear fender per-
manently. This may cause the
fender to loosen or damage the
spring holding the fender. As a
result, the brake pad constantly
touches the wheel and the motor
temperature increases due to the
additional resistance.The rear tire
can also get loose if the brake is in
constant braking position.
•Avoid constant braking. As a re-
sult, the tires will not only wear
off, but also become hot.This will
soften the rubber and it will no
longer have the same grip on the
road as usual. Do not touch the
tire after braking.
•If the tire gets untight stop driv-
ing immediately and contact your
customer service.
•Tire should be changed by the
independent operator or service.
•Please change the tire at reg-
ular.
•If you hear unusual noises or
notice friction when switching
on the electric scooter, a bearing
may be damaged. A worn bear-
ing may even be indicated by
strong vibration of the handlebar.
In this case,
•Ride the electric scooter only on
a dry surface since otherwise
the riding safety and braking
performance may be impaired
and the motor or bearings may
be damaged.
•Please do not ride up or down
long and steep slopes.
•The scooter cannot use on the
steep road.
•The e-scooter has overheating
protection system and maybe it
is activated on long slopes rid-
ing. please wait a while to reac-
tivate the product by power on
again.
•Stop riding when you receive
the “Low Battery Warning”. The
electric scooter then moves only

6 / EN Electric Scooter / User Manual
1 Important safety and environmental instructions
slowly and does not have the
same traction as normal and the
electric brake does not work. In
this case, please use the rear
brake to stop the electric scooter.
Get off the Electric scooter as
soon as the speed allows to do
that safely.
•Do not use the electric brake and
the throttle at the same time.
•A normally working Electric scooter
operates safely and quietly. If you
hear noises or notice bumpy op-
eration, please check wheels,
bearings, and brakes. Contact your
customer service for repair and
maintenance, if necessary.
– The A-weighted emission
sound pressure level at work-
stations, where this exceeds
70 dB(A); where this level
does not exceed 70 dB(A)
– The peak C-weighted instan-
taneous sound pressure value
at workstations, where this
exceeds 63 Pa (130 dB in re-
lation to 20 μPa)
– The A-weighted sound power
level emitted by the machin-
ery, where the A-weighted
emission sound pressure level
at workstations exceeds 80
dB(A)
•Take the time to learn the basics
of the practice to avoid any seri-
ous accident that can take place
in the first months
•Avoid high traffic areas or over-
crowded areas.
•In any case, anticipate your tra-
jectory and your speed while
respecting the code of the road,
the code of the sidewalk and the
most vulnerable.
WARNING: It is recommended
to avoid obstacle jumping. Before
crossing these obstacles, it is very
important to predict and adjust
your trajectory and speed to suit
the trajectory and speed of pe-
destrians. When these obstacles
become dangerous due to their
shape, height or sliding, it is also
recommended that you get out of
e-scooter.
WARNING: Keep plastic covering
away from children to avoid suf-
focation.
WARNING: Notify your presence
when approaching a pedestrian or

Electric Scooter / User Manual 7 / EN
1 Important safety and environmental instructions
cyclist when you are not seen or
heard.
WARNING: Cross the protected
passages while walking.
WARNING: In all cases, take care
of yourself and others.
WARNING: Do not divert the use
of the vehicle.
WARNING: This vehicle is not in-
tended for acrobatic use.
WARNING: Caution, the brake
may become hot in use. Do not
touch after use.
WARNING: Regularly check the
tightening of the various bolted el-
ements, in particular the wheel ax-
les, the folding system, the steer-
ing system and the brake shaft.
WARNING: Eliminate any sharp
edges caused by use.
WARNING: Do not modify or trans-
form the vehicle, including the
steering tube and sleeve, stem,
folding mechanism and rear brake.
WARNINGS:
•Failure to observe, loss of con-
trol, falls, and violations of the
rules can cause injuries.
•Speed and range depend on the
rider’s weight, terrain, tempera-
ture, and riding style.
•Wear a helmet and protective
clothing when riding the Electric
scooter.
•Read the operating instructions
carefully before riding the Elec-
tric scooter.
•For use only in a dry environ-
ment.
•Make sure that this product com-
plies with local regulations.
WARNING: It should not be used
on roads prohibited by local gov-
ernments.
•It should not be driven by hanging
or holding on to another vehicle.
•It should not be driven with one
hand.
•Dangerous behaviors should not
be done while driving.
•Do not disassemble or change
any part of the vehicle without
the approval of the authorized
service or do not modify. Opera-
tions made without the approval
of the authorized service will spoil
the originality of the vehicle and
the vehicle will be out of war-
ranty. Please make all changes
at authorized service points.

8 / EN Electric Scooter / User Manual
WARNING: Never use the product
close to a water source.
WARNING: Stop using the prod-
uct when damaged.
•Do not attach anything on the
handlebar. It can affect the sta-
bility of the e-scooter.
•Accessories and any additional
items which are not approved
by the manufacturer shall not be
used.
•Please check the limits of use in
accordance with the local reg-
ulations (e.g. use in pedestrian
areas, on-road).
•Do not touch the brake disc.
1.2 Compliance with the WEEE
Directive and Disposing of the Waste
Product:
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equip-
ment (WEEE).
This symbol indicates that this product
shall not be disposed with other
household wastes at the end of its ser-
vice life. Used device must be returned
to official collection point for recycling
of electrical and electronic devices. To find these
collection systems please contact to your local au-
thorities or retailer where the product was
purchased. Each household performs important
role in recovering and recycling of old appliance.
Appropriate disposal of used appliance helps pre-
vent potential negative consequences for the envi-
ronment and human health.
1.3 Compliance with RoHS Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
1.4 Package Information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by the
local authorities.
1.5 Information on Waste Batteries
Li-ion
This symbol on rechargeable batteries/
batteries or on the packaging indicates
that the rechargeable battery/battery
may not be disposed of with regular
household waste.
Always dispose of used rechargeable batteries/
batteries in accordance with local environmental
regulations. Make enquiries about the applicable
disposal regulations where you live.
1 Important safety and environmental instructions

Electric Scooter / User Manual 9 / EN
2 General appearance
2.1 Overview
1
2
3
5
6
7
8
9
12
4
11
10

10 / EN Electric Scooter / User Manual
Control and parts
1. Brake lever
2. Bell
3. LED display
4. Power / Front Headlight on/off button
5. Front headlight
6. Unfolding and folding lever
7. Front shock suspension
8. Foot support
9. Disc brake
10.Warning lights
11.Rear headlight
12.Accelerator button
13.Charger
14.6x Screw for handle bar
15.Allen key
16.Air pump nozzle
2.2 Technical data
Input 100V-240V~, 50/60Hz, 2.5A(Max)
Output 42V, 2A
Battery 36V 7.5Ah
Max speed 25 km/h
Distance up to 25 km
Weight 16 kg
Max load 120 kg
Power consumption ≤ 350W
Emission sound pressure level Emissions < 70 db (A).
Max. Slope ∼15°
Folding size (L*D*H) 1140*435*490 mm
2 General appearance
13 14 15 16

Electric Scooter / User Manual 11 / EN
2 General appearance
Unfolded size (L*D*H) 1140*435*1165 mm
Charging time 5 h
Battery Nominal voltage 36 V
Input voltage 42 V
Type: Li-ion battery Battery capacity 7500 mAH
Always charge the electric scooter with the
supplied power adapter
XHK-800B-4220
LED display
88 Driving speed Real-time driving speed
km/h Speed unit Speed unit, press the on/off key three times to change
to km/h or mph.
mph
ECO mode
Speed mode
Low-speed gear light, 0-6km/h.
D - Drive mode Medium-speed gear light, 0-15 km/h
S - Sport mode High-speed gear light, 0-25km/h
Headlight icon When the headlight icon light on, the front light is on.
Press the on/off button twice to switch the headlights.
Overheating
warning icon
When the scooter temperature is getting too high, this
icon will light up to remind the user to stop riding.
Fault icon If the Fault icon light is on, do not drive, and check the
scooter by a professional person.
----- Battery icon
Real-time remaining battery power display. Five bars
are fully charged, 1 bar and blinking is low battery,
please charge in time.

12 / EN Electric Scooter / User Manual
3.1 Assembling the device
Before using the scooter it is necessary to install
the handlebar on the frame main vehicle.
1. Insert the handlebar into the vehicle frame.
2. After matching the holes in the handlebar with
those of the frame, insert the screws and tight-
en them well; repeat the operation also in the
side opposite of the handlebar inserting a total
of 4 screws.
3.2 Unfolding and folding the scooter
3.2.1 Unfolding the scooter
1. Place the electric scooter on its wheels like
below.
2. Unlock the hook on the handlebar.
3. Pull up the handle in a gentle way. Raise the
handle slowly. Close the lock lever located on
the lower part of the handlebar support tube.
1
2
3 Installation of appliance

Electric Scooter / User Manual 13 / EN
4. The electric scooter is unfolded as soon as you
hear the rod clicks into place.
3.2.2 Folding the scooter
1. Release the release lever located on the lower
part of the support tube of the handlebars. Fully
open the release lever.
2
1
2. Open the scooter by accompanying the handle-
bar tube downwards.
3. Hook the folded tube onto the appropriate sup-
port.
3 Installation of appliance

14 / EN Electric Scooter / User Manual
4 Preparation
•Please make sure to check that the steering sys-
tem is correctly adjusted and that all connection
components are firmly secured and not broken
before riding, and that the brakes and wheels
are in good condition. Refer to handle assembly
and safety instruction.
•Please read operation guide and warnings of
correct techniques for use and braking
•Must wear shoes
•First, charge the battery completely
•Do not wear loose clothing or open laces that
can get caught in the Electric scooter wheels
•We highly recommend to always wear helmet/
pads for your own protection
•Self-locking nuts and other self- locking fixings
may lose their effectiveness
•All parts and materials of electric scooter cannot
be changed, modifications of the scooter are not
allowed. If done, then warranty is void
•Please turn on the lights when driving at night
•Maximum capacity: 120kg.

Electric Scooter / User Manual 15 / EN
5 Charging
5.1 Charging
Connect the supplied power adapter to the charg-
ing port of the electric scooter. Lithium battery
inside.
•Make sure that the Electric scooter, charger, and
DC power input of the device are always dry.
CTo charge this Electric scooter,
use SOLELY the supplied XHK-
800B-4220 charger with the follow-
ing output: 42 V -2 A.
•Use the mains adapter to plug the DC input of
the device into a conventional socket.
•There will be no light on the charger before
charging, when connected to e-scooter the
adapter will light red, and charging has started.
•The red indicator lights up when properly
charged; if this is not the case, please check
the connections.
•Now you can stop the charging cycle. Over-
charge shortens the battery life.
•The charging process takes up to 4 hours. Do
not charge the battery for more than 3 hours.
After 3 hours, disconnect the charger from the
device and the power supply. Overcharge re-
duces the battery service life.
•Do not remove the device from its package to
fully charge it and then put it back in the pack-
age.
•Allow the Electric scooter to cool down for at
least 1 hour before it can be put in the package.
•Do not leave the device exposed to sunlight in
a car.
A
WARNING: When charging, the ma-
chine will automatically shut down
and cannot be turned on. It can
be turned on after unplugging the
charger.
ACAUTION: The Electric scooter must
not be used during the charging cy-
cle
•The LED indicator on the battery charger lights
red during the charging process.
•The LED indicator on the charger will light green
when the charging process is complete.
•After charging, disconnect the charger from the
mains and the Electric scooter.
ACAUTION: Connect the DC cable
supplied with the Electric scooter
only to the DC input!
•Do not insert foreign objects into the DC input.
A
CAUTION
•Do not remove the protective cap
from the DC input!
•Remove the cap only when charg-
ing the Electric scooter!
•After charging, disconnect the DC
plug and close the DC input again
with the cap!
A
WARNING: Make sure that neither
water nor other liquids penetrate
into the inner components of the
Electric scooter; otherwise, the elec-
tronics/batteries of the device could
be permanently damaged. There is a
risk of injury.

16 / EN Electric Scooter / User Manual
5.2 Regarding battery charging
The battery built in the Electric scooter is not fully
charged from production line and when left un-
used the battery can slowly discharge by itself.
This can lead to slow charge if the battery is fully
discharged, but this is done to avoid damage to
the battery.
If you experience that you cannot turn on your
E-scooter, and it doesn’t seem to charge (the
charger lights up green instantly), then please do
the following.
1. Leave the charger in for 6-7 hours. This will
make sure the battery will be fully charged
again (it can take 3-4 hours before it starts
normal charging).
2. If this does not solve your problem, please ride
the Electric scooter manually without turning it
on. Use your legs to give speed, for around 100
m, and then connect the charger. The engine in
the front wheel will this way help to activate the
charging function and it will charge normally.
(fully charge takes 3 hours if using this way)
5.3 Warnings
•Using another charger may damage the product
or create other potential risks.
•Never charge the product without supervision.
•The charging period of the product should not
exceed four hours. Stop charging after four
hours.
•The product should only be charged in temper-
atures between 0°C and 45°C.
•If charging at lower or higher temperatures,
there is a risk that the performance of the bat-
tery will be reduced and a potential risk of dam-
age to the product and personal injury.
•The product should only be used in tempera-
tures between -10°C and +45°C.
•If used at lower or higher temperatures, there is
a risk that the performance of the battery will be
5 Charging
reduced and a potential risk of damage to the
product and personal injury
•Store the product at temperatures between 0°C
and 35°C. (optimum storage temperature is
25°C)
•Charge and store the product in an open, dry
area and away from flammable materials (i.e.
materials that may burst into flames).
•Do not charge the device in direct sunlight or in
the vicinity of open flames.
•Do not charge the product immediately after
use. Let the product cool down for one hour be-
fore charging.
•If the product is left with other persons for exam-
ple during a holiday period, it should be partially
charged (20-50% charged). Not fully charged.
•When shipped from the factory, the product has
often been partially charged. Keep the product
in a partially charged state, until it is going to
be use.

Electric Scooter / User Manual 17 / EN
6 Operation of the appliance
6.1 Intended use
The Electric scooter is neither a means of transport
nor sports equipment, but a device for personal
entertainment. The Electric scooter is for only by a
person aged at least 16 with a maximum weight
of 120 kg. The technical data for the permissible
operation of the Electric scooter is defined in the
section. Importantly, the Electric scooter may only
be operated in good visibility conditions and only if
the physical conditions for stability on the Electric
scooter are met (for example, it can not one leg
drive, or do not drive under the influence of drugs
or alcohol). When operating the electric scooter,
the Important safety and environmental instruc-
tions must wear personal protective equipment
specified in the section.
6.2 Vehicle operating instructions
1. Press the power button (4) to change gears, low
gear (ECO), medium gear (D), high gear (S).
2. You have to manually kick the Electric scooter
with your foot before accelerating to drive.
3. Vehicle start mode: The scooter is a power-
assisted start mode, and the accelerator button
(12) will only work when the speed of the scoot-
er reaches 3km/h. Press the accelerator button
(12) to accelerate and you can start. Press the
brake lever (1) to brake.
4. When you press the accelerator (12) and brake
lever (1) at the same time, the Electric scooter
will automatically brake.
CFor safety, the rear wheel brake sys-
tem must be used when driving at
high speed.
5. When driving at night, press the power button
(4) twice to turn on /off the front LED light.
6. After booting, the rear lights will automatically
flash when the current speed is 0-6 KM/H in
ECO mod.
7. Press the brake lever (1), the scooter will stop
running.
8. Factors affecting cruising range. It depends on
several factors:
– Terrain: There is a larger range on a flat road
than on an uneven ground.
– Weight: The range depends on the weight of
the rider.
– Temperature: Extreme temperature will
reduce the range.
– Maintenance: If the electric scooter is charged
correctly and the battery is in good condition,
the cruising range will be extended.
– Speed and riding style: The range at constant
speed is larger than the range of frequent
stops and starts, accelerations and braking.
9. For pneumatic tires, the maximum pressure is
marked on the tire.
6.2 Front and back LED light
1. This Electric scooter is equipped with the front
and back LED lights. Press the power button
(4) twice to turn on/off the front and back LED
lights.
2. Press the brake lever (1) to make the rear LED
lights flash.
6.3 Safe riding
This chapter focuses on safety, experience, and
warnings. Before operating the vehicle, please
read all installation and operating instructions
carefully.
AWARNING: Familiarize yourself with
the vehicle before you use it so that
you can keep the Electric scooter in
sound condition.
•Observe all safety instructions when riding the
Electric scooter.
•Children, elderly people, and pregnant women
are not allowed to ride the vehicle.

18 / EN Electric Scooter / User Manual
6 Operation of the appliance
•People with limited sense of balance are not al-
lowed to ride the Electric scooter.
•Avoid riding the Electric scooter under the influ-
ence of alcohol or other substances.
•Do not carry any objects while riding.
•Make sure you have a clear vision in front of you
to ride the Electric scooter safely.
•While riding, your feet must always be on the
foot support (8).
•The Electric scooter can accommodate only one
person.
•Do not start or stop abruptly.
•Avoid riding on steep slopes.
•Stop riding the Electric scooter if you hit a solid
object (such as a wall or other structure) with it.
•Do not ride in dimly lit or dark places.
•Ride the Electric scooter at your own risk, we
assume no liability for accidents or damage.
•Users are obliged to comply with the rules
specified in the Electric Scooter Regulation No.
31454, the Highway Traffic Law No. 2918 and
other relevant legislation. No liability is accepted
for any financial loss, physical injury, accident,
legal dispute and other disputes arising from
non-compliance with these regulations and/or
actions that violate user instructions.
•Ride at a safe speed that allows you to stop at
any time.
•Keep the electric scooter at a sufficient distance
from pedestrians and vehicles to avoid colli-
sions.
•Steer through balance shifting, fast movement
can result in falls.
•Do not ride in rain or under other wet conditions.
Ride only in dry weather.
•Avoid riding over obstacles, if possible, and
avoid snow, ice, and slippery surfaces.
•Avoid riding over textiles, small branches, and
stones, if possible.
•Avoid riding in narrow places or in places with
obstacles, if possible.
•Jumping on and off the Electric scooter will
cause damage that is not covered by the war-
ranty. There is a risk of injury. Injuries and dam-
age due to “trick riding” are not covered by the
warranty.
CTo charge this Electric scooter,
use SOLELY the supplied XHK-
800B-4220 charger with the follow-
ing output: 42 V -2 A.
•Do not modify or transform the vehicle, includ-
ing the steering tube and sleeve, stem, folding
mechanism and rear brake.
•The height of the user: 140-200 CM
•The age of the user: 16-50 Years
•Ensuring the rider’s safety.
•Avoiding damage due to overload.
A
WARNING: Make sure that neither
water nor other liquids penetrate
into the inner components of the
Electric scooter; otherwise, the elec-
tronics/batteries of the device could
be permanently damaged. There is a
risk of injury.
ACAUTION: Do not open the electric
scooter casing, otherwise the war-
ranty is invalidated.
•Make sure to wear helmet and protective cloth-
ing before using the Electric scooter.
•Make sure to read manual carefully before using
the Electric scooter.
•The Electric scooter must only be used on dry
and level ground
•The Electric scooter may not be used by anyone
under age of 16 years

Electric Scooter / User Manual 19 / EN
A
WARNING: As with any mechanical
component, a vehicle is subject to
high stresses and wear. The various
materials and components may re-
act differently to wear or fatigue. If
the expected service life for a com-
ponent has been exceeded, it may
break suddenly, therefore risking
causing injuries to the user. Cracks,
the scratches and discoloration in
the areas subject to high stresses
indicate that the component has ex-
ceeded its service life and should be
replaced.
6.4 Electric scooter safe parking
Once you have stopped the Electric scooter, get off
it and press the side stand down with your right
foot to support the Electric scooter. The side stand
is located on the left-hand side of the Electric
scooter below the foot support (8).
Before you ride again, push the side stand back up
so that it is parallel to the foot support (8).
6 Operation of the appliance
When the vehicle is parked outdoors, please use
a mechanical lock to lock the vehicle to prevent
theft.
•It should be parked in such a way that it does
not hinder the movement of pedestrians and the
disabled.
•It should be parked in a way that does not hinder
pedestrian and vehicle traffic.
•It should not be parked in a way that violates
public order or violates private property.
6.5 Safe transportation
Pack the Electric scooter flat, don’t drop the
Electric scooter during the transportation, don’t
to put the Electric scooter near fire or explosive
materials.

20 / EN Electric Scooter / User Manual
7 Cleaning and maintenance
•To ensure you get the best possible performance
and experience from your electric scooter, it is
important to do regular maintenance for impor-
tant parts of the product.
•Battery maintenance
•Bearings, Screws, Brakes and Wheels
•Storage and Cleaning
Your electric scooter will require some mainte-
nance so please read and familiarize yourself with
this guide.
7.1 Battery maintenance
•All batteries have a life cycle, and performance
will decrease over time, however here are some
advice to maximize the life span of the battery.
•Make sure that the battery is charged at regu-
lar intervals, even if you do not use the electric
scooter for a long time. This is to prevent dam-
age to the battery, caused by low voltage over
an extended period.
•Avoid draining the battery completely. It is best
to charge while there is still power on it.This will
extend battery life. If the battery is constantly
depleted, it will damage the battery (damaged
battery caused by wrong handling are not cov-
ered by the warranty).
•If riding the electric scooter in cold or very hot
areas, the battery time can be lower than when
riding in temperatures from 15-25° Celsius.
This is not a failure on the batteries, but normal
behavior.
A
WARNING: Even a fully charged
battery will run out of power if the
electric scooter is not used for a pe-
riod. Expect a fully charged battery
to keep power between 90 and 120
days in off mode, before it is fully
discharged. If only partially charged,
this period is lower
•Please make sure the battery does not get
above 50° Celsius, or below minus 10° Celsius
for a longer period. (e.g. don’t leave the electric
scooter in a hot car in summer, do not put bat-
tery into fire etc.) Low temperature (e.g. subzero
temperature) can damage the battery cells.
•Keep the Electric scooter away from open flame
or other sources of heat to prevent the battery
from getting too hot.Also make sure not to leave
the electric scooter at freezing temperatures.
Both heat and excessive cold can cause the
battery to discharge.
•Only use original charger or an official replace-
ment, as different batteries may require specific
charger, and if using other chargers, this could
cause damage to the product.
•Do not overcharge and discharge the battery.
•Please make sure to charge the battery before
it is completely out of power, to avoid damaging
the battery cells.
CDamaged battery caused by wrong
handling are not covered by the war-
ranty.
•It is forbidden to disassemble battery package.
This is only to be handled by official service re-
pair centers and professionals.
7.2 Bearings, screws, brakes and
wheels
Your electric scooter is made up of moving parts,
which in time, will be susceptible to wear and tear.
Bearings and screws: The electric scooter has
sealed and dustproof bearings so that no lubrica-
tion is required. Check the bearings for wear at
regular intervals to avoid unsafe riding. Do not
jump on and off and do not apply excessive force
otherwise to avoid damage to the bearings. This is
not a sports electric scooter.