Doohan iLark User manual

Please read this User's Guide carefully
and do not use the vehicle until you
have fully understood the performance
of the vehicle.。
Please keep the User's Guide in a safe
place.
User’s Manual

Dear electric scooter (iLark) users, for the safety of you and others, and
to ensure that the electric scooter (iLark) performance is excellent and
stable, please read the instruction manual of this product before use.
1. Instructions for use
⚫Do not use an electric scooter until you have read the instructions
carefully to understand the performance of the electric scooter; do
not lend to people who do not operate the electric scooter;
⚫Before using the electric scooter, check whether the fasteners of the

handlebar, saddle, saddle tube and wheel are tightened, and the
locking mechanism of the folding mechanism is locked. Pay
attention to the safety line of the saddle tube; check whether the
brake is effective;
⚫Please observe the city traffic regulations and do not bring people;
slow rain and snow and slippery roads should slow down and
increase the braking distance when braking to ensure safety.

⚫Do not disassemble and disassemble parts by yourself. The company
is not responsible for the losses caused. If you need to replace the
parts, our special maintenance department can provide spare parts
catalogue and spare parts. If you have any questions, please consult
the after-sales service.

2. The main technical parameters
Measurement
Length（mm）
1133
Width
（mm）
513
Height（mm）
1082
Wheelbase
（mm）
800
Front wheels
distance（mm）
405

Main performance
Net weight
（kg）
28 (Batteries not
included)
Capacity
（person）
1
Front and rear
axis assignment
（kg）
Front16/Rear12(Ba
tteries not
included)
Max Loading
capacity
（kg）
75
Max design speed
（km/h）
25
Rated voltage
（V）
48
Climbing ability
≤7º
Brake distance (Speed
Dry
≤15

25km/h)（m）
road
Brake distance (Speed16km/h)
（m）
Wet
road
≤19
Standard power consumption
（KWh/100km(25km/h)）
1.4/1.9
Frame
Rear shock
Sleeve, oil damping
Front tire
60/80-8
Rear Tire
75/65-8
Front Tire pressure
250±10

(Kpa)
Rear Tire Pressure (Kpa)
300±10
Front wheel (alloy)
MT1.50-8
Rear Motor
MT1.85-8
Front brake
/
Rear brake
Disk
Ground Clearance（mm）
83
Seat Height（mm）
585-807
Maximum roll angle （°）
≤31
Max Turning Angle（°）
≤33
Turning radius（m）
2.50

Maximum distance between
the front two wheels height
（mm）
170
Battery System
Battery type
18650 Ternary lithium battery
Voltage（V）
48
Capacity（AH）
15
10
Charging Input Voltage
（V）
AC 220 or 110(optional)

Charging Output Voltage
（V）
54.6
Rated Charging Current
（A）
3
Standard Charging Time
（H）
6
4
Max Range
（KM）
15AH
35
10AH
25
Battery W.t.
（Kg）
15AH
4.2±0.2
10AH
3.2±0.2
charge and discharge
500

（times）
Battery operating ambient
temperature range（℃）
-20 to 60
Battery storage ambient
temperature range （℃）
1 month
-20~60
3
months
-20~45
12
months
-20~20
The Charging ambient
temperature （℃）
0~45
Battery protection system
Undervoltage protection, short

circuit protection, temperature
protection, overcharge protection,
overcurrent protection, battery
balance protection
Others
Instrument
LCD instrument
Fuse specification（A)
3A、 20A
Front light
12V LED
Starting way
Remote/APP

3. Component description

Lock
在福
建宁
德做
人力
资源
文秘
4.Remotor and APP
1 Unlock button (remote control): Press
the unlock button twice in succession, the
whole vehicle is powered on, the
unlocking is successful, and the unlock
button is pressed again, the whole vehicle
is turned off.
2 unlock (APP): press the unlock. button,
voice prompt “The vehicle has been
unlocked”, the whole vehicle is powered
on and the unlocking is successful.
Unlock
在福
建宁
德做
人力
资源
文秘

1 Lock button (remote control): When you are driving, press the
unlock button to turn off the power of the vehicle, press the lock button
again, and the vehicle enters the anti-theft mode.
2 lock button (APP): When you are driving, press the Lock key, the
voice prompts "The vehicle is locked", the whole vehicle power is turned
off and enters the anti-theft mode.

5.Folding mechanism
Direction riser folding
Step 1: Move the 1 direction
riser folding wrench hoop up
in the figure.
Step 2: Pull the 2 direction
riser folding wrench down in
the figure.
It can be folded down as
shown in the picture.

Seat riser folding
Step 1: Rotate the seat
riser clamp hoop to the right
in the figure.
Step 2: Pull the 2 direction riser
folding wrench down in the figure.
It can be as shown in the picture
Figure 3 seat cushion riser hoop
assembly open the seat
to adjust up and down.

6. Dashboard and combination switch

Fault code definition：
Fault
code
Definition
cause of issue
In case of failure,
please contact our
after-sales service
department in
time
02
Under voltage
protection
Battery is too low
05
HALL
protection
Motor and controller Hall
plug loose or component
damage
07
Phase loss
protection
Controller MOSS tube is
broken
14
Turn fault
The switch is not returned
or the plug is loose