Arctic King MWDUL-10CRN1-BCJ4 User manual

information about this product, please call our toll-free number.
SAVE THIS MANUAL
Keep this manual and the original sales invoice in a safe, dry place for future reference.
Notre personnel du service à la clientèle est disponible pour vous aider. En cas de problème avec votre achat, ou pour
obtenir plus d’informations à propos de ce produit, veuillez composer notre numéro sans frais.
CONSERVEZ CE GUIDE
Conservez ce manuel avec la facture d’origine dans un endroit sûr et sec pour référence future.
Our customer service staff is available to help you. For any problem with your purchase, or to receive further
Customer Service / Service à la clientèle: 1 866 646 4332
WINDOW AIR CONDITIONER
Operator's manual
Model/Modèle :
87795050
MWDUL-10CRN1-BCJ4

18
19
20
25
1
2. OPERATING INSTRUCTIONS
REMOTE CONTROL OPERATING INSTRUCTIONS
3. 9
5
4.
5.
6.
7.

2
grounding.
grounding
A damaged applicance
place

any other
purpose than air cooling.
3

(Applicable to the unit adopts current detection device only)
Operation of Current Device
4

/64-109oF
/62-90oF
Operating Instructions
Normal Sounds
NOTE: All the illustrations in this manual are for explanation purposes only. Your air conditioner may be
slightly different, but its functions are the same.
5

Displays
Temperature/Time
/Error Codes
Mode
Selector
Operating Instructions
Unit Control Panel
ON/OFF button
UP/DOWN button
FAN button
Energy Saver button
SLEEP button
The unit will intiate automatically the Energy Saver function under Cool , Dry , Auto(only Auto-
Cooling and Auto-Fan) modes.
COOL, DRY
2ºF/1ºC
2ºF/1ºC
, AUTO(only AUTO-COOLING and AUTO-
FAN) mode The fan s.
6

MODE button
TIMER button
CHECK FILTER button
Operating Instructions
7
cannot be
illuminate

DISPLAYS:
Operating Instructions
Additional Things You Should Know
8

Installation Instructions
Meeting Electrical Requirements
9
Preparing for Installation
properly
build

Installation Instructions
10

Installation Instructions
Installing Unit in a Sliding Window
11
81116
1.Attach support brace to platform as shown.
center platform assembly
Property Damage Hazard-Failure to adhere to
the following precautions could result in
damage to window or air conditioner.
2.Measure,and lightly mark a line 8-11/16 inches
from window jamb.
3.

Installation Instructions
12
it is tilted 3~4°
3~4°
to the outside,
Peel off protective backing
4.
5.
6.
7.
8.
9.
Securely attach a siding-protection board
Place platform assembly,
Adjust platform assembly
Level platfrm assembly from side-to-side.
Measure height of window opening
on the right.

Installation Instructions
13
Clamp plastic window panel10.
11.
12.
13.
14.
15.
Fasten side channels
Slide plastic window panel into panel frame,
Cut side channel seal
To remove front
Place AC in window opening.

Installation Instructions
Alternate Window Jamb Applications
14
16.Slide inner window sash firmly
17.Hook the safety bracket over
18.Push the foam seal strip/sash seal
19.Use the window locking bracket
20.To replace the front

Installation Instructions
Installing the Unit in a Casement Window
15
1.Attach support brace to platform
2.Drill a 9/64-inch diameter pilot hole
3.Peel off the protective backing
4.Screw the paltform assembly to the window
aligns
jamb

Installation Instructions
16
5.Adjust the platform assembly
6.Securely attach a siding-protection board
7.Measure the height of the window opening
8.Clamp the plastic window panel
unit
frame
10.Slide the plastic window panel into the panel
9.Fasten the side channels to the sides of the

Installation Instructions
17
11.Cut side channel seal
12.To remove frone
13.Place the air conditioner in the window
opening as shown on the right.
14.Drill two 9/64-inch diameter pilot holes
15.Drill two screw-clearance holes
16.To replace the front
Do not

Care And Cleaning
Air Filter Cleaning
Cabinet Cleaning
Winter Storage
18

Troubleshooting Tips
19