Tips for applying thermal adhesive
Cure time
RAM Voltage regulator
Installation of main cooler
Please follow the installation instructions provided with the main cooler.
Installation of RAM and voltage regulator heatsinks
Caution: Please make sure the heatsinks are not touching any circuit components as it may cause a short circuit to your VGA card.
Installation of mounting plate
60mins
How to squeeze out all the glue?
Apply pressure (10 sec)
Heatsinks align to the right Heatsinks align to the left
Heatsinks align to the BottomHeatsinks align to the Bottom
2. Install replacement mounting plate
comes with the accessories set
1. Uninstall default mounting plate
Copyright
2010 ARCTIC Switzerland. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced,transmitted,stored in a retrieval system,or translated into any languagein any form or by any means, except documentationkept by the purchaserfor backup purposes,without the expresswritten permissionofARCTIC
Switzerland.InnoeventshallARCTICitsdirectorsoremployeesbeliableforanyindirectdamages,incidentalorconsequentialdamagesarisingfromanydefectorerror in thismanualorproduct.
ARCTIC Switzerland
Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac
1
2