Arctic VR005 User manual

nVIDIA GeForce GTX 460
RAM
60mins
Compatibility
Installation of main cooler
Please follow the installation instructions provided with the main cooler.
Installation of RAM and voltage regulator heatsinks
Tips for applying thermal adhesive
Caution: Please make sure the heatsinks are not touching any circuit components as it
may cause a short circuit to your VGA card.
Installation of mounting plate
How to squeeze out all the glue?
Cure time
Accessories
Heatsinks x 5
Heatsinks x 4
Screws (M3) x 2
Mounting plate x 1
*Thermal adhesive x 1
*Be aware that the thermal adhesive comes with a very
short shelf life and shall be used within 1 week. We
recommend storing the thermal adhesive in a cool area to
avoid solidification. Refrigerate after opening. Additional
heatsinks and thermal adhesive are available for purchase
at vga.arctic.ac
2. Install replacement mounting plate
comes with the accessories set
1. Uninstall default mounting plate
Heatsinks align to the bottomHeatsinks align to the bottom
Heatsinks align to the leftHeatsinks align to the left
Heatsinks align to the rightHeatsinks align to the right
Apply pressure
(10 sec)
Apply pressure
(10 sec)
Heatsinks x 1 Heatsinks x 11
Voltage regulatorVoltage regulator
1
2
Accessories Set VR005
Installation Manual
For further information, please consult www.arctic.ac
Copyright
2010 ARCTIC Switzerland. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced,transmitted,stored in a retrieval system,or translated into any languagein any form or by any means, except documentationkeptby the purchaser for backup purposes,without the expresswritten permissionofARCTIC
Switzerland.InnoeventshallARCTICitsdirectorsoremployeesbeliableforanyindirectdamages,incidentalor consequentialdamagesarisingfromanydefectorerrorinthis manualorproduct.
ARCTIC Switzerland
Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac