Arctic VR003 User manual

nVIDIA GeForce GTX 470, 465
RAM
60mins
Compatibility
Installation of main cooler
Please follow the installation instructions provided with the main cooler.
Installation of RAM and voltage regulator heatsinks
Tips for applying thermal adhesive and thermal pad
Caution: Please make sure the heatsinks are not touching any circuit components as it
may cause a short circuit to your VGA card.
Installation of mounting plate
How to squeeze out all the glue?
Cure time
Accessories
Heatsink x 1
Washers x 3
*Thermal adhesive x 1
*Be aware that the thermal adhesive comes with a very
short shelf life and shall be used within 1 week. We
recommend storing the thermal adhesive in a cool area to
avoid solidification. Refrigerate after opening. Additional
heatsinks and thermal adhesive are available for purchase
at vga.arctic.ac
2. Install replacement mounting plate
comes with the accessories set
1. Uninstall default mounting plate
Apply pressure
(10 sec)
Apply pressure
(10 sec)
Thermal pad
Voltage regulatorVoltage regulator
Heatsinks align to the rightHeatsinks align to the right
Heatsinks align to the bottomHeatsinks align to the bottom
Heatsinks align to the leftHeatsinks align to the left
Thermal pad x 1Thermal pad x 1
Mounting plate x 1Heatsinks x 10
Screws (M2.5) x 3 Screws (M3) x 2
Screws (M2.5)
Washers
Accessories Set VR003
Installation Manual
For further information, please consult www.arctic.ac
1
2
Copyright
2010 ARCTIC Switzerland. All Rights Reserved.
No part of this manual including the products described in it, may be reproduced,transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentationkept by the purchaser for backup purposes, without the express written permission ofARCTIC
Switzerland.Inno eventshallARCTICitsdirectorsoremployeesbe liableforany indirectdamages,incidentalor consequentialdamagesarisingfromanydefectorerrorinthismanualorproduct.
ARCTIC Switzerland
Huobstrasse 4
8808, Pfäffikon, Switzerland
www.arctic.ac