Arctic P614 BT Operating and safety instructions

Welcome Guide
P614 BT
www.arctic.ac
Dear Customer,
Thank you for choosing the ARCTIC P614 BT.
Based on the P402 BT, these on-ear headphones
come with an even higher level of comfort and a far
improved sound clarity. High end drivers and the
most comfortable cushioning were incorporated to
make the P614 BT an everyday essential.
I hope you enjoy the P614 BT as much as I do and
we at ARCTIC look forward to further enriching
your life with our products. If you would like to
share how you use ARCTIC's products please do
so at https://www.facebook.com/ARCTIC.en
ARCTIC is a fully carbon neutral company and your
support helps us to compensate every kilogram of
CO we produce. Thank You.
2
Sincerely,
Magnus Huber
ARCTIC CEO
support.arctic.ac/p614bt
EN
DE
FR
ES ...

Packaging Contents
P614 BT x 1, Micro USB Cable x 1, Travel Pouch x 1
Welcome guide x 1
Switch on
Press the multifunction
button for 3 seconds until
the blue LED lights up
Switch off
Press the multifunction
button for 3 seconds until
the red LED lights up
Function Diagram
Getting Connected
The P614 BT allows you to pair with your mobile
device in 2 different ways:
Music Stutters
4
5
6
Switch On / Off
multifunction button
LED indicator
Micro-USB charging
Microphone
Previous track
Next track
1. Switch on the P614 BT by press the Multifunction
Button for 3 seconds.
2. The P614 BT automatically enters pairing mode
shown by the red and blue LED flash alternately.
3. Turn on Bluetooth on your phone and pair it with the
headphone.
A. Bluetooth Pairing
Switch the Headset On or Off
ButtonsButtons

Select
Bluetooth
Click Settings
Bluetooth
is On
Select
P614 BT
P614 BT
Switch On
Bluetooth
Now
Connected
P614 BT
Example: iOS
Press Settings > Bluetooth and switch Bluetooth on
> P614 BT > Pair
Example: Android 5.0
Press Menu > Settings > Switch on Bluetooth >
Bluetooth > Scan for devices > P614 BT > Pair
Click
Settings
Switch On
Bluetooth
Bluetooth
is On
Click Scan
for Devices
Select
ARCTIC
P614 BT
Now
Connected
ARCTIC P614 BT ARCTIC P614 BT

Notes:
- Pairing mode will last up to ten minutes or until a device is
found, two tones will sound to let you know when pairing has
stopped.
- If you exceed the effective range of approx. 10M (33ft) the
headphone will disconnect and will automatically reconnect if
the speaker re-enters the effective range within ten minutes.
1. Switch on the P614 BT by Press the Multifunction
Button for 3 seconds.
2. Enable NFC on your mobile device.
3. Slide your phone very slowly from top to bottom
across the shown area of the right side of the
headphone until you hear a beep and a confirmation
message comes up on your mobile device.
4. Play music!
B. NFC One Touch Pairing
(only for NFC enabled phones)
How to wear the headset
NFC antenna
The video shows how easy it is
to pair the P614 BT via NFC

Phone Operations
If the mobile device that is paired (via Bluetooth) with the
P614 BT headphone is a cellular phone you can:
LED Indicators
Status
Charging
Battery Full
On and Paired
Paring Mode
Low Battery
Indication
Red LED on
Blue LED on
Blue LED flashes
Red and Blue LED will flash alternately
Red LED flashes
Reconnection
Answer Call Press the once.
End Call Press the once.
Refuse Call Press and hold for 2 seconds.
Switch Call Press and hold for 2 seconds
while in a call.
Charging the headset
It is recommended to fully charge before initial use for
better battery life.
USB Chargers are available at
chargers.arctic.ac
The P614 BT can be charged while switched on or off.
1. Insert the micro USB cable into the P614 BT and
the USB side into a power source.
2. When the Blue light on constantly the P614 BT is
fully charged.
1. Turn on Bluetooth on phone.
2. Switch on the P614 BT by pressing the multifunction
button for 3 seconds.
3. If your device was the latest one to be paired with
the P614 BT it will connect automatically otherwise
please repeat pairing section.
Quick Charger 8000

Ÿ Wireless connections are affected by obstructions
such as walls, human body and other devices.
Ÿ Keep P614 BT dry, moisture may damage electronic
components.
Ÿ Exposure to high temperature will shorten the life and
damage electronic components.
Ÿ Opening / altering the P614 BT voids all product
warranty.
Ÿ Rough handling may damage inside electronic
components.
Ÿ Listening to music at high volume for long periods
can lead to hearing problems. We do not recommend
using these headphones at maximum volume,
particularly for long periods of time.
Cautions
Wearing Style Supra-aural, On-ear
Bluetooth Version V 4.0 Class 2
Frequency Response 20 Hz – 20 kHz
Battery Rechargeable 850mAh
Lithium Polymer battery
Specifications
Driver Size 40 mm
Impedance 32 Ω
Playback Time 30 hours
Weight 142 g
Microphone Sensitivity - 42 dB +/- 3 dB
Improve the Comfort of Your P614 BT
p614comfort.arctic.ac

© 2015 ARCTIC (HK) Ltd. All rights reserved.
No part of this manual including the products described in it,
may be reproduced, transmitted, stored in a retrieval system, or
translated into any language in any form or by any means,
except documentation kept by the purchaser for backup
purpose, without the express written permission of ARCTIC
(HK) Ltd. In no event shall ARCTIC, its directors or employees
be liable for any indirect damages, incidental or consequential
damages arising from any defect or error in this manual or
product.
Warranty
This ARCTIC product includes a two-year limited warranty.
For information please visit http://warranty.arctic.ac
Like us on facebook
www.facebook.com/ARCTIC.en
PKMNL00030C