Arcus-EDS Touch_IT C3 Series User guide

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 1
1 Product Page / Application Description
The following section describes the installation, the existing connections, the specifications and the commissioning and
parameterisation by the ETS.
1.1 Product Page
3,5" Display for visualisation and control in KNX systems.
The Touch_IT C3-AE-IP65 ( on-wall, outdoor / damp room, IP65 ) is mounted
with 2 skrews onto the wall.
Installation Touch_IT C3-xxx is carried out using a mounting ring. Magnetic
elements and the locking screw are used for fixation in a standard 60 mm in-
wall socket.
The Touch_IT features an integrated KNX bus coupler and requires additional
voltage 9 .. 32VDC / 1,5W.
Different control elements are available for the application software.
The Touch_IT must be projected using the ETS ( EIB Tool Software ) and the
application program. Control elements and page layout can be parametrized
using the ETS.
Areas of Application
• Switching and dimming of lights
• Adjustment of color and brightness in RGB lights
• Displaying switching states in a building
• Switching various devices on and off
• Operating blinds
• Alarm functions, acoustic and optical
• Alarm display of motion sensors with clear text
• Displaying and setting heating adjustments
• Displaying indoor and outdoor temperature
• Weekly time switch
Touch_IT C3
-AE-IP65
On wall mounting
Aluminium anodized
22310265
Touch_IT C3
-AE
Metal housing with bevel
Aluminium sandblasted anodized
22310200
Touch_IT C3
-AW
Metal housing with bevel
Aluminium sandblasted white
powder-coated
22310201
Touch_IT C3
-SAE
Metal housing square-edged
Aluminium sandblasted anodized
22310300
Touch_IT C3
-SAS
Metal housing square-edged
Aluminium sanded anodized
22310303
Touch_IT C3
-SAB
Metal housing square-edged
Aluminium sanded black anodized
22310304
Touch_IT C3
-SAG
Metal housing square-edged
Aluminium sanded steel grey anodized
22310305
Touch_IT C3
-SMB
Metal housing square-edged
Brass sanded bronzed
22310400
Touch_IT C3
-SMG
Metal housing square-edged
Brass polished gold plated
22310407
Article-No.: 22310xxx
3,5“ Color Touch Display
Touch_IT C3-AE-IP65 On-Wall
Touch_IT C3-xxx In-Wall
›
S
e
it
e
1
»

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 2
Commisioning and Connector Description
Commissioning the KNX display is carried out using the ETS (EIB Tool Software) and the corresponding application software. At
delivery, the device is unprogrammed. All functions must be parameterized and programmed using the ETS. Please review the
documentations belonging to the ETS.
The touch screen is designed for in-wall installation. The degree of protection is IP20. Installation is carried out using the support
ring and the magnetic fixing. A locking screw type Torx-6 serves for fixation.
The connections of the Touch_IT C3-AE-IP65 are identical.
Das Touch_IT C3 AE-IP65 wird mittels zwei Schrauben an der Wand o.ä. befestigt.
Please make sure that electronic parts do not get damaged by tools or cable ends during installation.
Display: 3,5“ TFT Touchscreen
Processor: 200MHz 32-Bit ARM
Operating System: Linux
Additional Voltage: 9 .. 32VDC / ca. 1,5W
Ambient Temperature Operation: -5 .. +55 °C
Ambient Temperature Storage: -5 .. +60 °C
Optional Temperature-Probe: 1-Wire bus
Ambient temperature according to manufacturer’s specifications.
Protection Touch_IT C3-AE-IP65: IP65
Protection Touch_IT C3-xxx: IP20
Touch_IT C3 Assembly View
Additional Power Supply
9 .. 32VDC / 1,5W
Mounting Link
( up )
KNX Terminalblock
1-Wire Probe Connector
Temperature
MicroSD Slot
Mini-USB-Plug
Programming Button
LED
‹
›
S
e
it
e
2
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 3
In Wall Mounting
Fix the frame on the flush-mounted box.
The nose has to be pointing upwards.
Connect the Touch_IT with the KNX-Bus ( black / red )
and the auxiliary voltage ( white - / yellow + ).
Insert the Touch_IT carefully in the box,
( Attention, do not the electronic parts damage! )
tip it slightly and hook it in at the nose.
For fixture use the screw on the under-neath.
( Allen Key 1,5mm / or Torx 6 )
‹
›
S
e
it
e
3
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 4
Technical Data
Behaviour at Bus Voltage Recovery
All settings carried out using the ETS will be preserved.
Discharging Program and Resetting Device
If the visualization does not react due to a malfunction or incorrect configuration of the programming, the entire project work can
be deleted by pressing the programming button. The device will be reset to delivery status. Please hold the programming button
while connecting power supply and wait until the application for touch screen calibration appears. Normally, this takes 40-60
seconds. After entering the 5 calibration points, you can transmit your application once again.
Display 3,5" TFT color display ( 320x240 RGB ) ( 256k color ) touchscreen
Processor 200MHz 32-Bit ARM
Operating system Linux
Background Adjustable LED background light
Parameterization ETS
Max. number of elements / Max. number of pages 8 / ( 5 control pages + 1 alarm page or 6 control pages )
Ambient temperature, storage -5 .. +60 °C
Ambient temperature in operation -5 .. +55 °C
Operational voltage EIB/KNX bus voltage 21 .. 32VDC
Approx. power consumption 10 mA ( at 24V DC )
Additional voltage 9 .. 32VDC / approx. 1.5 W
Bus coupler Integrated
Commissioning via ETS Touch_IT_xxx.pr5
Connections EIB-2-polar terminal ( red / black )
AUX-2-polar terminal ( yellow / white )
Optional Temperature Probe ( 1-Wire ) Yes
On-Wall
Degree of protection IP65
Installation type On wall mounting
Casing Aluminium anodized
Casing measurements 120 x 80 x 48 mm ( W x H x D )
Articlenumber 22310265
In-Wall
Degree of protection IP20
Installation type Installation with a mounting ring
Casing Various
Casing measurements with bevel
Casing measurements square-edged
82 x 82 x 8 mm ( W x H x D )
80,5 x 80,5 x 8 mm ( W x H x D )
Articlenumber 22310xxx
‹
›
S
e
it
e
4
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 5
1.2 Application Description
The following are the main settings for the Touch_IT in the ETS software are described.
A detailed description follows in Chapter 2, Description Widgets.
1.2.1 Main Setting in the ETS
A) Master Password
A 4-digit password can be assigned to protect the different pages or object functions. In case that the value is “0“, this function is
inactive.
e.g.
In case that the password is “1“, “0001“ must be entered on the Touch_IT in order to access the protected page or to execute a
function of the protected element.
‹
›
S
e
it
e
5
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 6
B) Main Format String and Additional Parameters
These fields are used for global parameter setting. The following parameters can be used:
Two more parameters can be set in order to control standby object 194.
OBJ194OUT
This parameter determines how the output object reacts when the screen saver mode is changed. Values can be sent when
activating and leaving the screen saver. The following scheme demonstrates the settings in dependancy on the desired actions.
Standby mode will be interpreted as an extended screen saver mode.
OBJ194IN
Incoming telegrams on the system standby object can change the current status of the screen saver. The changes can be
defined for the values 0/1, as demonstrated in the following scheme.
C) Pages
There are two possible options:
• 5 control pages + 1 alarm page
• 6 control pages
TDSEND No default value assigned. Date and time will not be sent.
TDSEND=xx Time allowance for sending time and date. Specified in solid hours.
e.g. TDSEND=17 (Time and date will be sent every day at 5 pm)
STDLONG Interpretation of a manual input as LONG (Default 500ms)
STDLONG=xx Determines the time (in ms) from which the manual input will be taken as LONG.
STDREP Default use of the general repetition rate. (Default 300ms)
STDREP=xx Sets the repetition rate (in ms)
LAYOUT Disables user‘s choice. Forces registered layout.
PGH Defines the maximum display height for the widgets.
The menu bar adapts to fill the display.
Screensaver inaktiv
Screensaver
aktiv (oder
Standby )
01x
0-- SW Sx
1WS -- xS
xWx xW --
Possible settings
Input
xx Ox Sx Wx
0-- Standby Screensaver Wake-Up
1-- -- -- --
xO OO SO WO
0-- Standby Screensaver Wake-Up
1Standby Standby Standby Standby
xS OS SS WS
0-- Standby Screensaver Wake-Up
1Screensaver Screensaver Screensaver Screensaver
xW OW SW WW
0-- Standby Screensaver Wake-Up
1Wake-Up Wake-Up Wake-Up Wake-Up
Demonstration:
Standby object parameters are to be set as follows: „Send a 1 when activating
and a 0 when leaving the screen saver mode“. The outcome of this is:
OBJ194OUT=WS;
Demonstration:
The interpretation of an incoming
telegram is to be carried out as
follows:
Change into standby mode at 0,
and into wake-up mode at 1
OBJ194IN=OW;
‹
›
S
e
it
e
6
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Product Page
Application Description
Touch_IT C3
Page 7
D) Use Password for Settings Dialog
Protect system page with a 4-digit password.
E) Page 1-5 Name; Format
The names of the control pages that appear in the layout menu can be assigned here.
The breakdown of widgets per page is homogeneous. By using of the parameter INHOM the page distribution will be set
inhomogeneous. The advantages of inhomogeneous distribution is when different sized images are used on the page.
Use Password for Page 2-5
Except for control page 1, all service pages can be protected/locked with a password.
( Exception: When 6 control pages are defined, page 6 also can be protected with a password. )
F) Page 6 ( Alarm ) Name; Format
The name of the control or alarm page that appears in the layout menu can be assigned here.
In addition, global alarm settings can be set here.
• RESCAN : Defines the time (in s) when alarm object is rescanned.
• BEEPOFF : Number of acoustic alarm signals
• AUTOHIDE : Leave alarm page if alarm condition is changed or confirmed in a different point.
G) Using Logic Functions
Further information on the logic functions is given in chapter 6, Logic.
H) Using Temperature Control
Further information on the regulation of the room temperature is given in chapter 5, RTR.
1.2.2 ETS Objects
Up to 196 group addressed can be adminstered. If no elements are activated yet, only the system objects within topology are
displayed.
e.g. Element 1A ist active on page 1 and defined as a 1-bit object. Topology will change as follows:
Every element includes function-specific objects that can be linked ( Cf. chapter 2, Elements ). The exact analogy between
parameter view and object view within topology will be displayed as follows:
e.g. Page 3,element 2B equals 3.2-B within topology.
‹
›
S
e
it
e
7
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Description Widgets
Touch_IT C3
Page 8
The following matrix will lead to an overview of the implemented elements and their possibilities for parameterization.
( For advanced users ! )
*The detailed description of the widgets, please refer to the Touch_IT documentation.
File: 1100_ex_Touch_IT C3.pdf
Download under: www.arcus-eds.de
‹
›
S
e
it
e
8
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Description Widgets
Touch_IT C3
Page 9
›
›
›
›
›
›
›
›
›
›
›
›
2.4 Overview 1-bit Elements
Image
Element
Number Element Type Details
Page
Range of
Values Format
11-bit-ON/OFF-Toggle-Text
*
0/1 B0,B1,AL,AH,NOBG,LOGIC,BSWAP,
RDRQ,PIN
21-bit-ON/OFF-Toggle-Picture
*
0/1 IMGSET,AL,AH,NOBG,LOGIC,BSWAP,
RDRQ,PIN
31-bit-ON/OFF-Toggle-Text with Value
*
0/1 W,L0,L1,B0,B1,AL,AH,NOBG,LOGIC,BSWAP,
LSWAP,RDRQ,PIN
41-bit-ON/OFF-Toggle-Picture with Value
*
0/1 W,IMGSET,L0,L1,B0,B1,AL,AH,NOBG,LOGIC,
BSWAP,LSWAP,RDRQ,PIN
51-bit-ON/OFF-Text with Value
*
0/1 W,L0,L1,B0,B1,AL,AH,NOBG,LOGIC,BSWAP,
LSWAP,RDRQ,PIN
61-bit-ON/OFF-Picture with Value
*
0/1 W,L0,L1,B0,B1,IMGSET,AL,AH,NOBG,LOGIC,
BSWAP,LSWAP,RDRQ,PIN
40 1-Bit-Value-Pushbutton
*
0/1 IMG,PRESS,RELEASE,LABEL,NOBG,JUMP,
LOGIC,LOGICR,PIN
62 1-Bit-Timer-Profile
*
0/1 W,L0,L1,OVRTO,NOBG,IMG,
RDRQ,PIN,PPIN
85 1-bit-Quad-ON/OFF-Status/Toggle-Text
*
4x 0/1 LABELS,N,W,NOBG,ALARM,RDRQ,PIN
86 1-bit-Quad-ON/OFF-Status/Toggle-
Picture *
4x 0/1 IMGSETS,N,W,NOBG,ALARM,RDRQ,PIN
87 1-bit-Quad-Value-Pushbutton-Text
*
4x 1 LABELS,N,W,NOBG,PRESS,PIN
88 1-bit-Quad-Value-Pushbutton-Picture
*
4x 1 IMGSETS,N,W,NOBG,PRESS,PIN
‹
›
A
S
e
it
e
9
»
«

Arcus-EDS GmbH Rigaer Str. 88 , 10247 Berlin Tel.: +49 / (0)30 / 2593 3914
www.arcus-eds.de x[email protected] Fax.: +49 / (0)30 / 2593 3915 e4
Subject to change
arcus-eds I KNX
VISU
C3
3,5“ TFT Color Touch Display
Description Widgets
Touch_IT C3
Page 10
›
›
›
›
›
›
›
›
›
›
›
›
2.5 Overview 1-Byte Elements
Image
Element
Number Element Type Details
Page
Range of
Values Format
10 1-Byte-Value-Text-Button 0 .. 255
*
0 .. 255 W,B-,B+,PF,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
11 1-Byte-Value-Picture-Button 0 .. 255
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,IMGVAL,RDRQ,PIN
12 1-Byte-Value-Slider 0 .. 255
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
13 1-Byte-Value-Text-Button -128 .. 127
*
-128 .. 127 W,B-,B+,PF,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
14 1-Byte-Value-Picture-Button -128 .. 127
*
-128 .. 127 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,IMGVAL,RDRQ,PIN
15 1-Byte-Value-Slider -128 .. 127
*
-128 .. 127 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
16 1-Byte-Value-Text-Button 0 .. 100%
*
0 .. 255 W,B-,B+,PF,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
17 1-Byte-Value-Picture-Button 0 .. 100%
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,IMGVAL,RDRQ,PIN
18 1-Byte-Value-Slider 0 .. 100%
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
19 1-Byte-Value-Text-Button 0 .. 360°
*
0 .. 255 W,B-,B+,PF,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
20 1-Byte-Value-Picture-Button 0 .. 360°
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,IMGVAL,RDRQ,PIN
21 1-Byte-Value-Slider 0 .. 360°
*
0 .. 255 W,PF,IMGSET,STEPS,MIN,MAX,AL,AH,NOBG,
REP,RDRQ,PIN
‹
›
S
e
it
e
10
A
»
«