Acnodes PC 1080 User manual

Quick Guide
PC 1080 / 1090
April. 2006 (V1.0)
1

CONTENTS
Chapter 1 Unpacking -------------------------------------------------------------------------------- 3
Chapter 2
Specification -------------------------------------------------------------------------------- 5
2.1 Specification
2.2 I/O Ports
Chapter 3 Installation --------------------------------------------------------------------------------- 7
3.1 OS Installation
3.2 Touch Driver Installation
3.3 MSR / I Button PS2 Interface Installation
3.4 Wall Mount Kit Installation
3.5 Cash Drawer
Chapter 4 Jumper Definition -----------------------------------------------------------------16
4.1 Main Board Layout
4.2 LCD Power Setting
4.3 COM1/2 Power Selection
4.4 COM 3 Power Selection
4.5 IDE Disk Drive Connector
4.6 FAN Connector
4.7 Serial Port
4.8 Power Connector
4.9 VGA connector
4.10 LCD & Inverter Connector
4.11 USB Port Connector
4.12 Audio Connector
4.13 LED
4.14 Power & Reset Button
4.15 Cash Drawer
4.16 Keyboard & Mouse Connector
4.17 Touch Connector
2

Chapter 1
Unpacking
Unpacking the Panel PC, please check the following items are presented and in good conditions:
a. Main Unit
b. CD: User’s Manual & Driver Bank
The driver disk includes user’s manual and all of driver software of peripheral, such as touch
screen, VGA, LAN….etc.
c. Wall Mount Bracket
3

d. Power Adapter
e. Power Cord: Optional USA, Europe, UK or Australia type.
4

Chapter 2
Specification
2.1 Specification
The Panel PC system configuration including 8.4” 12.1” and 15” as followings,
Main Board
CPU AMD Geode LX-800
System Memory 1 x DDR400 SO-DIMM Socket, up to 1GB
Display
TFT LCD Size 8.4” 12.1” 15”
Brightness 180nits 300nits 250nits
Resolution 800x600 1024x768
Touch Screen 5 Wire Resistive Type
Storage Device
HDD No Support 2.5” Slim Type
Compact Flash 1 x Type II, Slot
I/O Ports
Serial 2x RS232 (Pin9 with 5/12V Selected)
2x RS232 (Internal Touch & MSR Used)
USB 2 x USB2.0
2 x USB2.0 Internal Stand By
LAN 1 x RJ45, 10/100 Base-T
Cash Drawer 1 x RJ11 (Power 12V)
Audio AC97 2.0 Compliant, Speaker 2 x 2W
Others
Power Supply External, 12V / 80W, ATX
Compliance FCC / CE
Weight (Kgs) 1.4 2.8 4.0
Dimension (mm) 230x118x43 313x256x46.5 369x298x47
Operating Temperature 5 ~ 40 ﾟC
Optional Accessory
Wireless LAN 802.11g, USB I/F
Wall Mount Kits VESA Standard
Arm Mount Kits VESA Standard
MSR ISO STD 3 Tracks, KB I/F
5

2.2 I/O ports
Following ports show all of ports of system.
a. DC IN: connector for power adapter input 12VDC.
b. Cash Drawer: provide IO port address 280H for cash drawer control by RJ11.
c. COM 1/2: standard D sub serial port with 5V / 12VDC selected on pin9.
d. LAN: 10 / 100 base-T by RJ45 connector.
e. USB: play and plug USB 2.0.
f. Power Switch: toggle switch for power on.
g. MSR PS2: for attached MSR PS2 interface connection.
6

3.1 OS Installation
3.1.1 Embedded WEPOS / WinCE
Chapter 3
Installation
CD ROM Driver with USB interface
If you bought the system including WEPOS / WinCE operation system, please follow up
below procedure.
a. Connect CDROM to the USB port of system.
b. Turn on the system and enter completely into WEPOS.
c. Up load your application software into WEPOS platform.
d. Complete installation and execute the AP.
Note: We suggest that you buy and use factory recommend CD-ROM with USB interface while you are
placed first sample unit.
3.1.2 Win XP
If you would like to install the Win XP, we suggest the system’s configuration include 256MB RAM and
HDD.
a. Connect CDROM to the USB port of system.
b. Turn on the system and press “ Del” key enter to CMOS setup.
c. Select icon “Advanced BIOS Features“.
Phoenix – Award BIOS CMOS Setup Utility
¾ Standard CMOS Features
¾ Advanced BIOS Features
¾
Advanced Chipset Features
¾ Integrated Peripherals
¾ Power Management Setup
¾ PnP / PCI Configuration
¾ PC Health Status
ESC: Quit
F10: Save & Exit Setup
7

d. Select “First Boot Device” to “USB-CDROM”.
e. Press “F10” to save setup change and quit.
f. Install the Win XP, follow up the OS installation guide.
Phoenix – Award BIOS CMOS Setup Utility
Advanced BIOS Features
Virus Warning
CPU Internal Cache
Boot From Lan Control
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot UP NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
Small Logo(EPA) Show
[Disabled]
[Enabled]
[Disabled]
[USB-CDROM]
[HDD-0]
[CDROM]
[Enabled]
[On]
[Fast]
[Disabled]
6
250
[Setup]
[Non-OS2]
[Disabled]
3.2 Touch Driver Installation
Refer to list procedure of touch driver as followings, which is based on Win XP as example.
8

9

10

11

12

3.3 MSR / I-Button PS2 interface Installation
a. The MSR Kit included Bracket and Module.
b. Turn the system to rear side.
c. Screw up the bracket on the fixed hole.
13

d. Screw up the MSR module and connect the cable into connector.
3.4 Wall Mount Kit Installation
a. Screw up the female bracket on the mounting wall.
b. Screw up the male bracket on the rear side of the system.
14

c. Hang up the system to the bracket and slide to track for fixed.
3.5 Cash Drawer
For the 3
rd
version M/B which is released from end of April. The cash drawer pin assignment
as followings. In order to program the cash drawer easily, we also provide OPOS driver.
Note:
Pin Assignment
1 GND
2 Data Out Bit 0
3 Data In Bit 0
4 12V
5 NC
6 GND
I/O Address: 280H for Cash Drawer which is controlled by
Data bit: DIN0=>Bit 0, DOUT0=>FF
15

Chapter 4
Jumper Definition
4.1Main Board Layout
16

4.2 LCD Power setting
• JP2: This jumper is for the setting of LCD panel voltage.
JP2 Description
2-4 +3.3V
4-6 +5V
• JP2: This jumper is for the setting of LCD panel shift clock.
JP2 Description
1-3 Inverted
3-5 Normal
4.3 COM1/2 Power Selection
JP3 Description
1-3 COM1 RI Pin Use +12V
3-5 COM1 RI Pin Use +5V
7-9 COM1 RI Pin Use RI
2-4 COM2 RI Pin Use +12V
4-6 COM2 RI Pin Use +5V
8-10 COM2 RI Pin Use RI
4.4 COM3 Power Selection
JP4 Description
1-2 COM3 RI Pin Use +12V
5-6 COM3 RI Pin Use +5V
3-4 COM3 RI Pin Use RI
4.5 IDE Disk Drive Connector
• a. CN10: Primary IDE Connector (Pitch 2.00 mm)
PIN Description PIN Description
1 RESET# 2 GROUND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GROUND 20 N/C
21 IDE DREQ 22 GROUND
23 IOW# 24 GROUND
25 IOR# 26 GROUND
27 IDE DRDYA 28 GROUND
29 IDE DACK 30 GROUND
31 INTERRUPT 32 N/C
17

33 SA1 34 CABLE_80P
35 SA0 36 SA2
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GROUND
41 VCC5 42 VCC5
43 GND 44
b. CN8: Compact Flash Storage Card Socket
PIN Description PIN Description
1 GROUND 26 CARD DETECT1
2 D3 27 D11
3 D4 28 D12
4 D5 29 D13
5 D6 30 D14
6 D7 31 D15
7 CS1# 32 CS3#
8 N/C 33 N/C
9 GROUND 34 IOR#
10 N/C 35 IOW#
11 N/C 36 OBLIGATORY TO PULL HIGH
12 N/C 37 IRQ15
13 VCC 38 VCC
14 N/C 39 SLAVE
15 N/C 40 N/C
16 N/C 41 RESET#
17 N/C 42 IORDY
18 A2 43 DRQ
19 A1 44 ACK
20 A0 45 ACTIVE#
21 D0 46 PDIAG#
22 D1 47 D8
23 D2 48 D9
24 N/C 49 D10
25 CARD DETECT2 50 GROUND
4.6Fan Connector
These connectors can supply +5V/500mA to the cooling fan. In the connector there have a “rotation” pin. The
rotation pin is to get the fan’s rotation signal to system. So the system BIOS could recognize the fan speed.
Please note only specified fan offers the rotation signal.
• CN11 : Fan connector
PIN Description
1 Rotation Signal
2 VCC5
3 GND
18

4.7Serial Ports
The system provides three high speed NS16C550 compatible UARTS with Read/Receive 16 byte FIFO. Four
com ports are in IO connector.
• COM1: CN25 DB9-pin header
• COM2: CN26 DB9-pin header
PIN Description
1 DATA CARRIER DETECT (DCD)
2 RECEIVE DATA (RXD)
3 TRANSMIT DATA (TXD)
4 DATA TERMINAL READY (DTR)
5 GROUND
6 DATA SET READY (DSR)
7 REQUEST TO SEND (RTS)
8 CLEAR TO SEND (CTS)
9 RING INDICATOR (RI)
• COM2: CN27 pin header 2.0mm
PIN Description
1 DATA CARRIER DETECT (DCD)
2 RECEIVE DATA (RXD)
3 TRANSMIT DATA (TXD)
4 DATA TERMINAL READY (DTR)
5 GROUND
6 DATA SET READY (DSR)
7 REQUEST TO SEND (RTS)
8 CLEAR TO SEND (CTS)
9 RING INDICATOR (RI)
10 N/C
11 +5V
12 N/C
13 +12V
14 GROUND
• COM3: CN24 for Card Reader.
PIN Description
1 GROUND
2 +5V
3 RXD3
4 TXD3
5 KB_DATA_OUT
6 KB_CLK_OUT
7 KB_DATA_IN
8 KB_CLK_IN
9 RI3
10 DTR3
11 CTS3
12 RTS3
13 DSR3
14 DCD3
15 KB_EN
4.8Power Connector
19

• CN21: Power Connector Input
PIN Description PIN Description
1 GND 3 Power IN(+12V)
2 GND 4 Power IN(+12V)
• CN28: Power Connector Output
PIN Description PIN Description
1 +5V 3 GND
2 GND 4 +12V
4.9VGA Connector
The pin assignments are as following.
• CN3: 10-pin Connector
PIN Description PIN Description
1 RED 2 DDCDAT
3 GREEN 4 DDCCLK
5 BLUE 6 GROUND
7 HSYNC 8 GROUND
9 VSYNC 10 GROUND
4.10LCD & INVERTOR Connector
The pin assignments are as following.
CN2: 15-pin Connector for LCD
PIN Description
1 LVD0-
2 LVD0+
3 GROUND
4 N/C
5 N/C
6 GROUND
7 LVD1-
8 LVD1+
9 LVD2-
10 LVD2+
11 GROUND
12 LVDCK-
13 LVDCK+
14 LCD_VCC
15 LCD_VCC
• CN1: 6-pin Connector for INVERTOR
PIN Description
1 +12V
2 BKL_ Enable
20