User’s manual – AREBOS Air compressor 1100W 24 L
6
1.4 Safety information for paint spraying
•Do not process any paints or solvents with a flash point below 55° C. There is a risk of
explosion!
•Do not heat up paints or solvents. There is a risk of explosion!
•If hazardous liquids are processed, wear protective filter units (face guards). Also, adhere to
the safety information provided by the manufacturers of such liquids.
•The details and designations of the Ordinance on Hazardous Substances, which are displayed
on the outer packaging of the processed material, must be observed.
•Additional protective measures are to be undertaken if necessary, particularly the wearing of
suitable clothing and masks.
•Do not smoke during the spraying process and/or in the work area. There is a risk of
explosion! Paint vapors are easily combustible.
•Never set up or operate the equipment in the vicinity of a fire place, open lights or sparking
machines.
•Do not store or eat food and drink in the work area. Paint vapors are harmful to your health.
•The work area must exceed 30 m3 and sufficient ventilation must be ensured during spraying
and drying. Do not spray against the wind. Always adhere to the regulations of the local
police authority when spraying combustible or hazardous materials
•Do not process media such as white spirit, butyl alcohol and methylene chloride with the PVC
pressure hose. These media will destroy the pressure hose.
1.5 Operating pressure vessels
•You must keep your pressure vessel in good working order, operate the vessel correctly,
monitor the vessel, carry out necessary maintenance and repair work immediately and meet
the relevant safety precautions.
•The supervisory authority may enforce essential control measures in individual cases.
•A pressure vessel is not allowed to be used if it has faults or deficiencies that can endanger
workers or third parties.
•Check the pressure vessel for signs of rust and damage each time before using. Do not use
the compressor with a damaged or rusty pressure vessel. If you discover any damage, then
please contact the customer service workshop.
•The compressor is designed to generate compressed air for compressed-air driven tools
which can be driven with an air volume of up to approx. 270 l/min (e.g. tire inflator, blow-out
pistol and paint spray gun). Due to the limited air output it is not possible to use the
compressor to drive tools with very high air consumption (for example orbital sanders, rod
grinders and hammer screwdrivers).
•The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this.
•Please note that our equipment has not been designed for use in commercial, trade or
industrial applications. Our warranty will be voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent purposes.
