Argom E500 User manual

Mobile Phone
Model Name: E500
Brand Name: Argom
FCC ID: Q34-E500

1 Overview
Thank you for choosing the WCDMA/GSM digital mobile phone. After reading this guide you will
be able to fully master the use of your phone and appreciate all its functions and ease of use.
Not only does the smartphone provide you with basic call functions such as call Register, but also
with many practical functions and services, to improve the time you spend working and playing.
The color screen mobile phone complies with the WCDMA/GSM technology and has been
approved by certification authorities both domestically and abroad.
The availability of some services and features described in this manual depends on the network
and your subscription. Therefore, some menu items may not be available in your phone. The
shortcuts to menus and features may also vary from phone to phone.
Our company reserves the right to revise this manual content without prior notice.
1.2Safety guide
If your mobile phone is lost or stolen, please contact the telecommunications authorities or a
sales agent immediately to have a hold on the phone and the SIM card. This will prevent
economic loss caused by unauthorized calls made from your mobile phone.
When you contact the telecommunications authorities or a sales agent, they will need to know
the IMEI number of our mobile phone (remove battery to expose number located on the label on
back of phone). Please copy this number and keep in a safe place for future use.
In order to avoid the misuse of your mobile phone please take the following preventative
measures:
Set the PIN number of your mobile phone’s SIM card and change this number immediately if it
becomes known to a third party.
Please keep the phone out of sight when leaving it in a vehicle. It is best to carry the phone with
you, or lock it in the trunk.
Set call barring.
1.3 Safety warnings and notices
Before using your mobile phone, read and understand the following notices carefully to ensure
you will use it safely and properly.
1.3.1 General attention
Only the battery and battery charger specified by our company should be used in your phone.
Other products might result in battery leakage, overheating, fire or explosion.
To avoid your phone malfunctioning, or catching fire, please do not violently impact, jolt or
throw your phone.
Please do not place the battery, mobile phone, or charger in a microwave oven or high-pressure
equipment. Otherwise it could lead to unexpected accidents such as damage to the circuitry or
fire hazard.
Please do not use your phone near flammable or explosive gases, otherwise it could cause
malfunction of your phone or fire hazard.
Please do not subject your phone to high temperatures, high humidity or dusty places;
otherwise this may lead to the malfunction of your phone.
Keep your phone out of the reach of small children. Your phone is not a toy. Children could hurt
themselves.
To avoid your phone falling and malfunctioning or being damaged, please do not place it on
uneven or unstable surfaces.

1.3.2 Notices when using your phone
Turn off your mobile phone where the phone is not allowed, such as, on the airplane or in
hospitals. Using the mobile phone in those places may impact the normal operation of electronic
devices and medical instruments. Follow relevant regulations when using your mobile phone in
those places. Your mobile phone has the auto turn-on feature. Check your alarm clock settings to
confirm that your mobile phone will not be turned on automatically during flight.
Please do not use your mobile phone near the weak signal or high precision electronic devices.
RF interference might cause malfunctioning of such electronic devices and other problems.
Special tips must be paid near the following equipment: hearing aids, pace makers and other
medical electronic devices, fire detectors, automatic doors and other automatic control
installations. To find out the effect of mobile phones on a pacemaker or other pieces of electronic
medical equipment please contact the manufacturers or local sales agents of the equipment.
Please do not subject the LCD to impact or use the screen to strike things, as this will damage the
LCD board and cause leakage of the liquid crystal. There is a risk of blindness if the liquid crystal
substance gets into the eyes. If this occurs rinse eyes immediately with clear water (under no
circumstances rub your eyes) and go immediately to a hospital for treatment.
Do not disassemble or modify your mobile phone, as it will lead to damage to the phone such as
battery leakage or circuitry failure.
Under very rare circumstances using the mobile phone in certain model cars may negatively
affect the internal electronic equipment. In order to assure your safety under such circumstances
please do not use the mobile phone.
Please do not use needles, pen tips, or other sharp objects on the keypad as this may damage the
mobile phone or cause it to malfunction.
In the event of antenna malfunction, do not use your phone, as it could be harmful to human
body.
Avoid letting the phone come into close contact with magnetic objects such as magnetic cards as
the radiation waves of the mobile phone may erase the information stored on floppy disks, pay
cards and credit cards.
Please keep small metal objects, such as thumbtacks far away from the receiver. When the
receiver is in use it becomes magnetic and may attract these small metal objects and thus these
may cause injury or damage the mobile phone.
Avoid having the mobile phone come into contact with water or other liquids. If liquids enter the
phone, this could cause a short circuit, battery leakage or other malfunction.
1.3.3 Notices when using the battery
The battery has a limited service life. The remaining life gets shorter as the times of charging
increase. If the battery becomes feeble even after the charging, this indicates the service life is
over and you have to use a new battery.
Do not dispose of old batteries with everyday domestic garbage. Please dispose of old batteries
at the directed places with specific rules for their disposal.
Please do not throw batteries into a fire, as this will cause the batter to catch fire and explode.
When installing the battery, do not use force or pressure, as this will cause the battery to leak,
overheat, crack and catch fire.
Please do not use wires, needles or other metal objects to short-circuit the battery. Also, do not
put the battery near necklaces or other metal objects, as this will cause the battery to leak,

overheat, crack and catch fire.
Please do not solder the contact points of the battery, as this will cause the battery to leak,
overheat, crack and catch fire.
If the liquid in the batteries goes into the eyes, there is a risk of blindness. If this occurs do not
rub the eyes, but immediately rinse eyes with clear water and go to the hospital for treatment.
Please do not disassemble or modify the battery, as this will cause the battery to leak, overheat,
crack and catch fire.
Please do not use or place the batteries near high temperature places such as near a fire or
heating vessel, as this will cause the battery to leak, overheat, crack and catch fire.
If the battery overheats, changes color, or becomes distorted during use, charging, or storage,
please stop using and replace it with a new battery.
If the liquid from the battery comes in contact with skin or clothing this could cause burning of
the skin. Immediately use clear water to rinse and seek medical tips if necessary.
If the battery leaks or gives off a strange odor, please remove the battery from the vicinity of the
open fire to avoid a fire or explosion.
Please do no let the battery become wet as this will cause the battery to overheat, smoke and
corrode.
Please do not use or place batteries in places of high temperature such as in direct sunlight, as
this will cause the battery to leak and overheat, lower performance, and shorten the battery’s
life.
Please do not continuously charge for more than 24 hours.
1.3.4 Charging your phone
Connect the connector of charger to the mobile phone. The battery level indicator flashes on the
screen. Even if the phone has been turned off, the charging image still appears, indicating that
the battery is being charged. If the phone is overused when the current is insufficient, it may take
longer time for the charging indicator to appear on the screen after the charging begins.
When the battery level indicator does not flash and indicates the battery is full, this indicates the
charging has been completed. If the phone is off during charging, the charging being completed
image also appears on the screen. The charging process often takes 3 to 4 hours. During the
charging, the battery, phone and charger gets warm, this is a normal phenomenon.
Upon the completion of charging, disconnect the charger from AC power socket, and from the
mobile phone.
Notes:
During charging, the phone must be placed in well-ventilated environment of -10℃~ ＋50℃.
Always use the charger supplied by your phone manufacturer. Using an unauthorized charger
might cause danger and invalidate the authorization and warranty clauses for your phone.
The standby time and call duration provided by the manufacturer are based on ideal operating
environment. In practice, the battery's operating time varies depending on network conditions,
operating environment and usage methods.
Make sure the battery has been installed before charging. It is best not to remove the battery
while charging.
Upon completion of charging, disconnect the charger from your phone and the power supply.
If you have not disconnected the charger from your phone and the power supply, the charger

will continue to charge the battery after about 5 to 8 hours when the batter level decreases
substantially. We advise you not to do like this, as it lowers your phone performance and shortens
your phone life.
Notices when using your charger
Please use AC 120 volts. The use of any other voltage will cause battery leakage, fire and cause
damage to the mobile phone and charger.
It is forbidden to short circuit the charger, as this will cause electrical shock, smoking and damage
to the charger.
Please do no use the charger if the power cord is damaged, as this will cause fire or electrical
shock.
Please immediately clean any dust gathered on the electrical outlet.
Please do no place vessels with water near the charger in order to avoid water splashing onto the
charger and causing an electrical shortage, leakage or other malfunction.
If the charger comes in contact with water or other liquid the power must immediately be
switched off to avoid an electrical short or shock, fire or malfunction of the charger.
Please do not disassemble or modify the charger, as it will lead to bodily harm, electrical shock,
fire or damage to the charger.
Please do not use the charger in the bathroom or other excessively moist areas, as this will cause
electrical chock, fire or damage to the charger.
Please do not touch the charger with wet hands, as this will cause electrical shock.
Do not modify or place heavy objects on the power cord, as this will cause electrical shock or fire.
Before cleaning or carrying out maintenance please unplug the charger from the electrical outlet.
When unplugging charger, do not pull on the cord, but rather hold on to the body of the charger,
as pulling on the cord will damage the cord and lead to electrical shock or fire.
1.3.5 Cleaning and maintenance
The mobile phone, battery, and charger are not water resistant. Please do not use them in the
bathroom or other excessively moist areas and likewise avoid allowing them to get wet in the
rain.
Use a soft, dry cloth to clean the mobile phone, battery and charger.
Please do not use alcohol, thinner, benzene or other solvents to wipe the mobile phone.
A dirty outlet will cause poor electrical contact, lose of power and even inability to recharge.
Please clean regularly.
2 Getting Started
2.1.1 to install the application
Native support extended application, can be installed applications for APK file format. Installation
requires, first of all, for the first time in the "Settings - application" will check the item "unknown
sources".
.. Network to download:
.. Through the application of the computer to download to install the APK.
.. The APK file copy into the phone T card.
Select "document management" in the mobile phone found an.apk file, found to install the
application, directly touch points to start the installation.

.. Mobile phone online to download:
Through mobile phones the app store download online application, you first need to install in the
mobile phone electronic market clients. For example: play, baidu mobile application stores, etc.
.. Into the app store, find the need to program, click download, and system will be prompted to
install after the download is complete
2.1.2 Icons
In the standby mode, the following icons may appear in standby screen:
Icon
Description
Indicate the intensity of network signals.
Show missed calls.
Location by satellite.
Receive a new message.
An application is being downloaded.
The downloading is over.
The alarm clock has been set and activated.
A call is in progress.
The phone is playing a song.
Show battery level.
Enable USB.
The access is blocked.
Get connected to the wireless network
Turn on the Bluetooth.

No SIM card is installed in the phone.
GPRS data connection is on.
2.2 Key explanations
Key
Explanations
Return key
●Return to the previous menu.
Menu key
●Show options of current menu.
Home key
●At any status, press the key to return to the standby screen.
Power key
●Hold down this key to turn your phone off and on.
●Generally, press this key to lock the mobile phone.
Side volume
keys
●During the conversation, press the two keys to adjust the volume.
●While playing an audio file, press the two keys to adjust the volume.
Note: In this guide, the phrase “press the key”refers to pressing and thereafter releasing a key.
“Hold down a key”refers to pressing a key and keeping it depressed for 2 seconds or longer.
The descriptions and functions of keys depend on the model of your phone.
2.3Using the touchscreen
Your phone provides many touch keys in the Main screen. To use these keys correctly, calibrate
the touch screen in advance (see “Calibrator”). Meanwhile please follow the instructions:
■Do not touch the screen with wet hands.
■Do not touch the screen with great forces.
■Do not touch the screen with metallic or conductive objects.
2.4Connecting to the network
2.4.1 Inserting and removing the SIM card
Turn off the phone; remove the battery and unplug other external power supplies. Insert the SIM
card into the SIM holder as shown in the phone.
When you need to remove the SIM card, turn off the phone, remove the battery and then
remove the SIM card from the holder.
Warning: Do turn off your phone before removing the SIM card. Never insert or remove the SIM
card when an external power supply is connected, as this may cause damage to the SIM card.
2.4.2 Turning your phone on and off
To turn on the phone, hold down the POWER key on the top; to turn off the phone, hold down
the POWER key.
If you have turned on your phone without inserting the SIM card, the phone will prompt you to
install the SIM card. With the SIM card already inserted, your phone automatically verifies the
availability of the SIM Card.
Then, the screen shows the following:
Enter PIN1 —— if your have set the SIM card password.

Enter phone password —— if you have set your phone password
Search for network—— the phone searches for the appropriate network.
Notes：
If when you turn on the mobile phone, an exclamation mark appears on the screen and does not
disappear, this is possibly caused by misoperation, that is, you press the Power key and the
Volume Up key at the same time. Such misoperation activates the recovery mode, hence the
occurrence of exclamation mark. If you just turn off the phone, next time when you turn it on, it
will still come to the recovery mode.
Solution：
Press the Home key when the exclamation mark and robot appear, a menu will pop up. Use the
Menu key to select "reboot system now" to restart the phone.
2.4.3 Unlocking the SIM card
The PIN 1 (personal identification number) secures your SIM card from being misused by others.
If you have selected this function, you must enter the PIN1 code each time you turn on the phone
so that you may unlock the SIM card and then make or answer calls. You can deactivate SIM card
protection (see “Safety settings”). In this case, the misuse of your SIM card cannot be prevented.
Press the Hang Up key to turn on your phone;
Enter your PIN1 code. Clear the incorrect digits by using the right soft key, and press OK for
confirmation. e.g. if your PIN1 is 1234, please enter:
1 2 3 4
If you enter incorrect numbers for three times in succession, your SIM card will be locked and
your phone will ask you to enter PUK 1 number. If you do not know the PUK1 code, do not try.
Instead, contact your network service provider. See “Safety settings”.
Note: your network service provider sets a standard PIN1 code (4 to 8 digits) for your SIM card.
You should immediately change this number. See “Safety settings”.
2.4.4 Unlocking your phone
To prevent unauthorized use, you can set phone protection. If you have selected this function,
you must draw unlocking pattern each time you turn on your phone, to unlock the phone and
then make or answer calls. You may clear the unlocking pattern (see “Safety settings”). In this
case, the unauthorized use of your phone cannot be protected.
If you forget your phone password, you must contact the retailer or local authorized service
center to unlock your phone.
2.4.5 Connecting to the network
Once your SIM card is unlocked, your phone searches for available network automatically (the
screen will show the network searching is underway). If your phone has found the available
network, the name of network service provider appears at the center of screen.
Note: Making an emergency call。Note: If “only for emergency calls”appears on the screen, it
indicates that you are beyond the network coverage (service area), and that you can still make
emergency calls depending on the signal intensity.
2.4.6 Making a call
When the logo of network service provider appears on the screen, you can make or answer a call.
The bars at the upper left corner of screen indicate the intensity of network signal.
Conversation quality is significantly affected by obstacles, thus moving within a small area while

making or answering a call can improve the conversation quality.
2.4.7 Making a domestic call
In the Dial screen, enter a number, and press the Dial key to make a call. To change the number,
delete the digits you have entered. During dialing, the animation appears on the screen. After the
call is picked up, the screen will show call status information. If the connection alert tone has
been set, your phone will ring the alert tone (network dependent).
To end a call, press the Hang Up key.
Zone code Phone number Dial key
2.4.8 Making an international call
To make an international call, hold down the 0 key on the Dialing screen until the
international prefix "+” for appears. This allows you to dial an international number without
knowing its international fix (e.g. 00 for China).
Following the entry of international prefix, enter the country code and complete phone number.
For the country codes, follow the general conventions, for example, 49 for Germany, 44 for UK,
and 46 for Sweden.
Like making an international call via a fixed telephone, omit the “0”at the head of a city code.
For example, to call our hotline from another country, you can dial:
+86 21 114
+ Country code Complete phone number Dial key
2.4.9 Making a call from the list
All calls dialed and received are stored within a list in your phone. Those dialed and received
recently are exhibited at the top of the list (see “Call Register”). All the numbers are sorted by
Dialed Calls, Received Calls and Missed Calls. Your phone also provides options for you to view all
calls. When the call Register is full, the old numbers will be deleted automatically. To view the list,
do the following:
To view the dialed calls, press the Dial key
You can dial any number from the list by pressing the Dial key.
When the call list appears, press OK to see details, or go to Options -> Save to place the number
into your Phonebook.
2.4.10 Making an emergency call
If you are beyond the network coverage (see network-signal-intensity bars at the upper left
corner of the screen), you can still make emergency calls. If your network service provider does
not provide roaming service to the area, the screen will show “only for emergency calls”, alerting
you that you can only make such calls. If you are within the network coverage, you can also make
emergency calls even without the SIM card.
2.4.11 Call menu
The Call menu is only visible during an active call, and features such as Call Waiting, Call Diverting,
and Multiple-party Call are network dependent. Contact your network service provider.
The call options include:
Mute
Do not send local voice.

Handsfree
Switch on the loudspeaker to amplify the voice.
Hold
Put the current call on hold or retrieve the call on hold.
End a call.
End the current call.
More
*Start voice recording
Start voice recording.
*Turn on Bluetooth
The Bluetooth device, if any, can be used.
*New call
Make another new call.
2.4.12 Notification Menu
Slide and pull down menu on the main interface, you can see the message notice and choose
whether to turn on or off WIFI, Bluetooth, GPS, off-line mode. In the data connection, the current
SIM is available to make data connection of GPRS. Slide it around you can see the options of
profile for your convenience.
2.4.13 Widget
The widget is on the right of applications in Main Menu, holding down this widget, you can
drag it anywhere you want in the main screen. It is convenient for you to enter that procedure.
3 Functional Menu
（※The following features depends on specific models）
3.1 File Management
The file management is composed of sdcard and sdcard 2, while sdcard is the memory of the
phone, sdcard 2 is the external SD card. In the file management, files can be searched rapid,
deleted or edited in each card and new filescan be created.
3.2Sending an Email
You can send an Email to anyone who has an Email address.
Entering the procedure and set an account, you can click the account so that you come into the
account already created, you can also activate, compile and create an account and then delete
the operating. The email can be sent and received just like in a computer. This procedure requires
the network support.
3.3Dialing
When dialing, you can have a quick acess to the call records, contacts and digit dial keyboard
(used for manual dialing) by the menu key on the screen.
3.4 3G video call

Click a number portrait in the phonebook, and you can do these things instantly: dial, send a
message and make a video call. During the video call, you can select applications such as
adjusting it to mute mode, switching to robot portrait, turning off the voice and intercepting
photos to SD card.
3.5 Calculator
Your phone provides a calculator with 4 basic functions for the convenience of your calculating.
Press this button , and you delete the input and output in bitwise.
Notice: this calcutor is of limited accuracy and sometimes it causes error, please forgive us for
the inconvenience.
3.6 Browser
The browser allows you to surf on the net and browse the page just like on the computer. You
can create on the phone a bookmark and synchronize it with computer. You can have a quick
access to your favorite sites on the main screen.
You could view web pages in longitudinal or transverse mode. The page rotates according to the
rotation of the phone and automatically adjusts to fit the page.
3.7 Voice Recorder
The recorder could be used to record audio files.
To start voice recording: Tap
To end voice recording: Tap
To play back voice recording: Tap
The audio files are automatically stored on your phone. Click the Menu key,
and you can operate and set the recorded voice. The file can be in document management and
various players can be selected to play the voices.
3.8 Calendar
Calendar allows you to view your schedules and events at any time. You may view schedules one
by one or several ones at the same time.
Select to show calendar by day, week or month. If “by week (or month)”, the calendar will be
shown by week (or month). This application is convenient for you to view schedule or add
events.
3.9 Settings
Reach the menu and customize your phone settings. SIM card management: SIM card can be
managed and made settings.
WLAN: WLAN can be turned on and off and made some settings.
Bluetooth: Bluetooth can be turned on and off and settings are made.
The information flow usage: It makes you in full awareness of the usage of the information.
More: Click more and you will set up flight mode and VPN and more.
Audio profiles: General, silent, meeting and outdorr optional. In the meanwhile, customized
setting-up of some scene modes are allowed.
Select a mode and enter the customized setting-up, operational are vibration, volume, ring tones,
notifications and key beep, etc.

Display: Customized setting-up of the phone luminance, wallpaper, the screen and screen
time-out and font size is allowed.
Storage: The internal memory of the storage card and of the phone is shown.
Battery: The usage detail of the battery is shown.
Applications: View, manage and delete the applications on your phone.
Account and synchronization: Set the synchronization of your phone account with your phone.
Location service: Set the service during the locating.
Safety: Set unlocking pattern; lock the SIM card; set the SD card.
Language and keypad: Select a language and input method.
Backup and reset: Reset DRM and restore factory settings to clear all personal data on your
phone.
Date and time: Set current time and date.
Schedule power on/off: set the time to turn on or off your phone.
Auxiliary function: Some auxiliary functions can be set.
Developers’options: Set some options used by developers.
About phone: View the model, service status, mobile software and hardware information, etc.
3.10 Clock
Clock
Enter the menu to display the current time.
Alarms
Your phone provides many groups of alarm clocks. Select one of them to edit and customize
alarm clock.
3.11 Radio
Wear your earpieces of radio before searching for channels.
Glossary:
Channel list: Display the list of FM radio channels. You can select to play one of them. (the list
can contain 20 channels maximum)
Search: Select this option to automatically search for channels and generate the list of channels.
Speaker: Press the button to use the radio loudspeaker.
and : Tap to move to another channel.
.
3.12 Google Search
You can locally search for the information you need.
3.13 Contacts
The “contacts ”lets you easily call your colleagurs or friends, or send emails or short messages to
them. You may add contacts directly from your phone, or synchronize “contacts”with any
application on your computer. You may open “contacts ”directly from the Main screen, or open
it via the “Dialing”application.
Add a contact:
To add a contact, directly enter the name and phone number, or import the name and phone
number from the SIM card. (The number of contacts you can add is limited by the memory of
your phone.)
Search for contacts:

To search for a contact, press the Search key in search screen, and a search box will pop up. In
the search box, enter the key words, such as first name, second name and company name. While
you are entering the key word, the matching contacts immediately appear.
Edit a contact:
To edit details of a contact, select “Edit a contact”.
Delete a contact:
To delete the current contact, select “Delete a contact”.
From the menu, you can also synchronize with or share an account or import or export a
contact.
3.14 Gallery
Gallery is a picture manager that typically exhibits miniatures, supports the features of “save
picture”, “set pictures as desktop”and “share picture”.
3.15 Camera
Your phone provides the camera and video recorder features. Wherever you go, you can take
high-resolution photos and videos. It also supports advanced camera features such as image
stabilization, face embelishment, panorama shooting, high dynamic range and zero delay shutter,
which can also be customized.
3.16 Messaging
Messaging lets you send text and multimedia messages to any contact that has an SMS device.
The multimedia messages include photos, video clips (for iPhone 3GS or other new style phones),
contacts information, and voice memos. What’s more, you can send messages to several contacts
at the same time.
Note: Perhaps Messaging is not available in all countries and regions. Probably you need pay for
using Messaging. For more information, consult your network operator.
As long as you are within the network, you can use “Messaging”. As long as you can make a call,
you can send messages. You probably have to pay for sending or receiving messages, depending
on your network operator.
Send a message: Tap it, enter the number and name of the contact or select the contact from
Contacts. Tap the text box above keypad, enter the information and then tap “Send”.
After selecting the number, you can select such options as Call, Add subject, Attach, Insert facial
expression, and more.
Tap Settings to set ringtone, Delivery reports, and maximum quantity of messages.
3.17 Download Content
You can download through the browser things and pictures you want and list them in the
Download Content menu.
3.18 Music
Music is used for enjoying the stored audio files. Select Music, you can see the menus of “List of
played songs”, “Songs”, “Specialists”and “Artists”.
To pause playing a song
Tap 
To resume playing a
song
Tap ►
To skip to the next song
or reading material
Tap

Return to the previous
song or reading
material
Tap
To move fast backward
or forward
Touch and hold or . The
longer you hold, the more songs you
skipped.
To skip to any point in a
song
Drag the progress bar.
3.19 Call Records
Come into the call records, you can view missed calls, reveived calls and outgoing calls. The
calling time is viewed in each record and features such as calling, sending messages and adding
to new contacts can be set. Deleting call records and seting up speed dial can be done in the
menu.
3.20 Selecting Wallpaper Source
Hold down the main screen, the options of selecting wallpaper source will appear, then you
can set up wallpapers you like.
3.21 Local search
You can find some merchants and service facilities near a location, which you can find through
GPS navigation.
3.22 Note
Add note,Convenient you to check,delete and sort at any time.
3.23 MoboPlayer
A smart view play that support various format video,you can easily paly stored video files.
3.24 Map
The Map application provides the street maps, pictures, mixed views, and street views of many
countries and regions in the world. You can get real-time traffic conditions, as well as detailed
directions of driving, public transit, or walking. To get the direction of driving, find the starting
point, and then enter the destination.
The maps, directions and location-based information are provided by relevant data services.
These data services may vary from time to time, and be not available in some regions, thus the
provided maps, directions and location-based information may be invalid, incorrect or
incomplete.
If the location service is closed when you open the “Map”, the system may ask you to enable the
service. But you can use the “map”without enabling the location service.
3.25 Navigation
By virtue of GPS signal receiver, your current location is shown on the electronic map. If you have
set the destination, the system will tell you the route. This saves your time.
Signals from GPS satellites can be received only when you are using your phone outdoors or at
the window through which you can see the sky.
How to use the feature: In the Main screen, select “Settings”, click “Location and Safety”, tick
“Use GPS satellite”, and then reach the navigation menu. Note that it may take 10 minutes or
more for your phone to determine your current location for the first time.
3.26 Voice Search

Support voice search,through voice search website on google.
3.27 View palyer
A view play software,can detect mobile video and auto generate play list,you can easily paly
stored video files.
3.28 Wireless Input Device
Open Bluetooth,add new device,pair to other wireless input device then can use.
3.29 Mobile Broadcasts
Mobile Broadcasts can support your location active warning.Can set cell broadcast language and
channel.Display emergency alarm like extreme threat,grave threats.(notification:cell broadcast
service for network provider,please contact your network provider)
3.30 ToDo
Add todo,can write schedule notice and set deadline data.Review schedule and finish schedule
more Convenient.
3.31 Backup and Reset
Backup personal data and applications to sdcard,can restore at anytime if want.
3.32 Falm workpspace
<Falm Workspace> is a perfect video edit software,let you can put together your stored
music,photo and short video form a falm,enjoy your life.
4 Text Input
Enter text via the keypad. Examples of text include contact details, emails, short messages, and
websites. The keypad provides the functions of spelling prediction, spelling correction and
learning while using.
The smart keypad may give you prompts of correct spelling, depending on which application you
are using.
Enter text：
1 Tap the text box (memo, or new contact) to call the keypad.
2 Tap the keys on keypad.
At the initial stage, you can tap keys using either of your index fingers. Once you get familiar with
the keypad, you can try tapping keys using both of your thumbs.
While tapping a key, the corresponding letter will appear above your thumb or another finger. If
you are tapping a wrong key, you may slide to the correct one. Only when your tapping finger
leaves a key, can the corresponding letter be entered in the text box.

To delete a
character
Tap 。
To enter an
upper-case letter
Tap , and then tap that
letter.
To enter a digit
Tap , and then tap that
digit.
To enter a symbol
Tap , and then tap that
symbol.
Quickly enter a
space
Press the space key twice
successively.
To toggle input
methods
Hold down to to bring up
the keyboard.
5 FAQs and Solutions
If you have any questions about the phone, please find the solutions from the table below.
FAQs
Causes
Solutions
Poor
reception
When you use your phone at poor
reception areas, for example, near
high rise buildings or base rooms,
the radio wave cannot be
transmitted effectively.
Avoid this as far as you can.
When you use your phone at
network traffic congestion, such as
working time and off-duty time, the
congestion can result in poor
reception.
Avoid this as far as you can.
This is related to the distance to
base station in question.
You may ask the network service provider
to provide service coverage map.
Echoes or
noises
The trunk line of network is in bad
condition. It is a regional problem.
Hang off the call and dial again. Choose
another better line.

In some areas, the call lines are in
bad condition.
Shorter
standby
time
The standby time is relevant to
network settings.
In poor reception areas, turn off your
phone temporarily.
Replace the batteries
Change with a new battery.
When no signals are received, your
phone will continue searching for
base stations, thus consuming a
large amount of battery power and
reducing standby time.
Use your phone at strong signal areas or
Turn off the phone temporarily.
Failed to
turn on your
phone
The battery power is used up.
Check the battery power level or charge
the battery.
SIM card
error
The SIM card is damaged.
Contact your network service provider.
The SIM card is not properly
installed.
Ensure the SIM card is properly installed.
The metallic face of the SIM card is
contaminated.
Wipe the face with a clean cloth.
Failed to
connect to
the network
The SIM card is invalid.
Contact your network service provider.
Beyond the GSM coverage.
Consult the network service provider for
service areas.
The signal is feeble.
Retry at a stronger signal area.
Failed to
make a call
The call barring feature is used.
Cancel the call barring settings.
The fixed dialing number feature is
used.
Cancel the fixed dialing number settings.
PIN code
error
Enter incorrect PIN codes for three
times in succession.
Contact your network service provider.
Failed to
charge the
battery
The battery or the charger is
damaged.
Change a new battery or charger.
Charge the battery when ambient
temperature is lower than -10℃
or above 50℃.
Change the environment.
Poor connection.
Check whether the plug is properly
connected.
Failed to
add contacts
to
phonebook
The storage space of phonebook is
used up.
Delete some contacts from the
phonebook.
Failed to set
up some
features
Your network service provider does
not provide the services, or you
haven’t subscribed them.
Contact your network service provider.

FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its
action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure
to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard previously set by both U.S. and international
standards bodies. The design of this phone complies with the FCC guidelines and these
international standards. Use only the supplied or an approved antenna. Unauthorized antennas
modifications, or attachments could impair call quality, damage the phone, or result in violation
of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Please contact your local dealer for
replacement antenna.
BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back of the phone kept
5mm/10mm from the body. To comply with FCC RF exposure requirements, a minimum
separation distance of 5mm/10mm must be maintained between the user's body and the back of
the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters
and similar accessories containing metallic components shall not be used. Body-worn accessories
that cannot maintain 5mm/10mm separation distance between the user’s body and the back of
the phone, and have not been tested for typical body-worn operations may not comply with FCC
RF exposure limits and should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it
is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for
hand-held wireless phones. Those guidelines are consistent with the safety standards previously
set by both U.S. and international standards bodies:
<ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICIMIRP> (1996)
Those standards were based on comprehensive and periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers, and physicians from universities,
government health agencies, and industry reviewed the available body of research to develop the
ANSI Standard (C95.1). Nevertheless, we recommend that you use a hands-free kit with your
phone (such as an earpiece or headset) to avoid potential exposure to RF energy. The design of
your phone complies with the FCC guidelines (and those standards).
Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the phone and may violate FCC regulations.
NORMAL POSITION:
Hold the phone as you would any other telephone with the antenna pointed up and over your

shoulder.
RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refer to FCC website search for
FCC ID: Q34-E500 to gain further information include SAR Values.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Do not use the device with the environment which below minimum -10℃or over
maximum 50℃, the device may not work.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Ad Hoc function is supported but not able to operate on non-US frequencies.