argon audio FAN HAT User manual

Power / Reset
Button
LED Fan Speed
Indicator
GPIO Connector to
Raspberry Pi 4
Female GPIO
access
Designed for Raspberry Pi 4

HOW TO INSTALL ARGON FAN HAT
FAN CONTROL & POWER BUTTON
1. Connect the ARGON FAN HAT to your Raspberry Pi before plugging power.
Without the Argon FAN HAT Script the FAN will run constantly at 50% FAN SPEED
2. In the Raspbian OS, connect to the internet.
3. Open “Terminal” in Raspbian.
4. Type the text below in the “Terminal” to initiate installation of Argon FAN HAT script.
curl https://download.argon40.com/argonfanhat.sh | bash
5. After installation is completed REBOOT.
To uninstall the Argon FAN HAT script you may do so by clicking the
Argon ONE Uninstall icon on your Desktop.
You may also remove the script via “Terminal” by typing:
argonone-uninstall

ARGON FAN HAT SPEED
argonone-cong
1. Without the ARGON FAN HAT script the FAN will run constantly at 50% FAN SPEED
2. Upon installation of the script, DEFAULT SETTINGS of the ARGON FAN HAT are as
follows:
3. You may also change or congure the FAN to your desired settings by clicking the
ARGON ONE Cong icon on your Desktop.
4. Or via “Terminal” by typing and following the specied format:
CPU TEMP FAN SPEED / POWER
55 C 10 %
60 C 55 %
65 C 100 %

ARGON FAN HAT
POWER BUTTON FUNCTIONS
[e-mail] | www.argon40.com
The installation process will automatically congure and activate the ARGON FAN HAT
Power Button with the following functions.
ARGON FAN HAT ACTION FUNCTION
OFF
(FROM SOFT
SHUTDOWN)
Short Press Turn ON
ON Short Press Nothing
ON Long Press
(> 3 Secs)
Initiate Soft
Shutdown
(NO POWER CUT)
ON Double Tap Reboot