Argos Chad Valley Baby Circus Friends 599/9927 User manual

Argos
Avebury, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW
www.argos.co.uk
Customer Helpline: 03456 400 800
5999927
Cradling Bouncer
PRINTED IN CHINA
CHADVALLEYBABY
Circus Friends™
™
IMPORTANT! KEEP FOR FUTURE REFERENCE.
599/9927
10962_WWN_IS090116rev1

– 2 –
FALL HAZARD: Babies have suered skull fractures falling while in and from
bouncers when not used properly.
• Use bouncer ONLY on oor
• A child’s movement can slide the bouncer. • NEVER place the bouncer on
countertops, tables, on or near steps or on other elevated surfaces. • ALWAYS
use on the oor.
• NEVER lift or carry baby in bouncer
SUFFOCATION HAZARD: Babies have suocated when bouncers tipped over on
soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• NEVER leave baby unattended.
To prevent falls and suocation:
• ALWAYS use restraints. Adjust to t snugly.
• STOP using bouncer when baby starts trying to sit up (approximately 5
months of age).
o ONLY use the product when the child weighs more than 3kg and less than
9kg.
• This bouncer is not intended for prolonged periods of sleeping.
• NEVER lift bouncer using a toy bar as a handle.
• NEVER use as an infant carrier for automobile or airline travel.
• NEVER attach any additional strings or straps to product or toy bar
IMPORTANT
• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids II for replacement parts and instructions if needed. Never substi-
tute parts.
• This product has not been designed for sleeping. Should your child need to
sleep, they should be placed in a suitable cot or bed.
WARNING
EN

– 3 –
Parts List and Drawing
No. Qty. Description
1 (1) Base frame tube
2 (1) Left base frame member
3 (1) Right base frame member
4 (1) Left backrest tube
5 (1) Right backrest tube
6 (1) Footrest wire
7 (1) Seat pad

– 4 –
1
2
4 3
5
6
7

– 5 –
2
1
5
6
4
3
1
2
3
x2

– 6 –
4
5
6
7
x2

– 7 –
7
8

– 8 –
9
10
x2

– 9 –
2
1
x2
Using the Seat Restraint
x2
x2

– 10 –
Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-
and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No
bleach. Tumble dry, using low heat.
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in
water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.
EN
Care and Cleaning
To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside of
each connecting hub on the bouncer.
Remove the footrest tube and base frame tubes from each connecting hub.
EN
Release button
Storage and Travel