Arkon MC25MM432 User manual

Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9am - 5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2019 Arkon Resources, Inc.
!Safety Precautions
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
!
MC25MM432 | Mega Grip 25mm Handlebar Phone Mount rev.011119
Package Contents:
(1) MC25MMB –Motorcycle Handlebar Mount Pedestal
(1) SP-RMS250 – Small Robust Mount Shaft
(1) SM040-2 – Mega Grip Universal Phone Holder
(1) APRM2T – 25mm Ball to Dual T-Tab Adapter
(1) APLSSTRAP – Dual T-Slot to Dual T-Tab Elastic Securing Strap
This Motorcycle Mount fits cylindrical handlebars up to 30mm diameter
and comes with 3 handlebar spacer/adapter rings of different widths.
Select the appropriate size for optimum mounting to your handlebar.
The Mega Grip Universal Phone Holder fits smartphones up to 3.25
inches wide.
MC25MMB SM040-2 APLSSTRAP
3 4
APRM2T
SP-RMS250
Place handlebar spacer/adapter ring around handlebar. Attach mount
to handlebar around spacer. Use the included hex key to securely
tighten both mounting screws.
1Attach Robust Mount Shaft by unscrewing knob to loosen collar.
Adjust angle then retighten knob to secure.
2
Handlebar Spacer/
Adapter Ring
H
Mounting Screw
Mounting Screw
Attach strap by inserting the strap’s Dual T-Tabs in to the holder’s
Dual T-Slots. Attach adapter by inserting the adapter’s Dual T-Tabs
into the strap’s Dual T-Slots. Insert screw to secure.
Attach the assembled mobile phone holder by combining the
adapter to the Robust Mount Shaft and tightening to secure.
Dual T-Tabs
Set Screw
Dual T-Slots
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s
s

Safety Precautions
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
Consumer Hotline:
USA [phone]
INT’L [phone]
Monday - Friday 9am - 5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
© Copyright 2019 Arkon Resources, Inc.
!
MC25MM432 | Mega Grip 25mm Handlebar Phone Mount rev.011119
7Press release button to open mount arms.
Release button
6
Secure strap hook
Place strap across the device and secure it to the L-shaped strap hook.
Place the phone into the holder with the device sitting on the
support legs. Clamp the grip arms inward to secure the device in the
holder.
5
Grip Arms