Arlec UC0122 User manual

Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product
will be free of defects in materials and workmanship for a period of 12 months from the date of purchase;
provided the product is not used other than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase,
has not been subjected to abuse, misuse, neglect or damage, has not been modified or repaired without
the approval of Arlec and has not been used for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide
proof of original purchase and your name, address and telephone number, to Arlec at the address below
or the retailer from whom you originally purchased the product within 12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above
manner and if, in Arlec’s reasonable opinion, the Warranty applies, Arlec will at its own option and
expense (or authorise the retailer to) replace the product with the same or similar product or repair the
product and return it to you or refund the price you paid for the product. Arlec will bear its own expenses
of doing those things, and you must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the
product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer serviCe: [phone]
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [e-mail]
Warranty
CPIN002522
9
UC0122
D
I
Y
motion
sensor light
CPIN002522
Installation Instructions
Important!
Please read these instructions carefully.
Due to continuous research and development the specifications
in here are subject to change without notice.
4

CPIN002522
• Senses movement within 1 metre
distance and illuminates for
approximately 30 seconds when
triggered.
• 9 Super Bright LED Modules.
• 360° Swivel head.
• Ideal for undercabinet lighting,
bedrooms, kitchens, basements,
attics and wardrobes.
• Easy installation using attached
mounting bracket for wall or
undercabinet mounting.
• Requires only 3 x AA batteries
for operation.
• No bulbs to replace
Mounting bracket is attached to the
rear of the swivel light. Simply fix 2
screws into mounting surface then
slide the mounting bracket over
screws to lock into position.
Rotate light to expose battery cover.
Lift battery cover and insert 3 x AA
batteries with polarity as marked.
See Figure 1.
Fe atUre s InstallatIon
The push button switch turns light
on and off. When initially turned
on the light will stay illuminated
for approximately 30 seconds if no
movement is detected.
The sensor will detect movement
within approximately 1 metre and
remain illuminated for approximately
30 seconds if no further movement
is detected.
32
Figure 1.
BatterY InstallatIon
operatIng InstrUCtIons
Screw
Push Button Switch
Sensor
• This product is designed for indoor
use only.
• Not for use in wet or damp locations .
• Batteries may leak harmful liquids
or ignitable materials or explode
causing injury or damage.
• Do not mix old and new or any
battery types.
• Replace all batteries at the same time.
• Replace fully discharged batteries
immediately.
• Remove batteries if light is unlikely
to be unused for extended periods.
• Switch off before cleaning.
• Clean the exterior with a damp
cloth, then wipe dry.
• Do not use abrasive cleansers
or solvents.
Care anD CleanIng
saFetY InFormatIon
Screw