Arlo Audio Doorbell Manual

© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are
trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC. Other
trademarks are for reference purposes.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à arlo.com/docs.
(If this product is sold in Canada, you can access this document in Canadian
French at arlo.com/docs.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For regulatory compliance information including the EU Declaration of
Conformity, visit www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd.
Ground Floor, Building 3
University Technology Center
Curraheen Road, Cork, T12 EF21
Ireland
Arlo Technologies, Inc.
2200 Faraday Avenue, Suite 150
Carlsbad, CA 92008 USA
Set up your Arlo Video Doorbell
1. Download the Arlo app and follow
the setup instructions for Arlo Video
Doorbell.
2. Connect the power kit to your
existing chime.
3. Replace your existing doorbell with
your Arlo Video Doorbell.
The Arlo Video Doorbell requires a wired doorbell and chime
with voltage between 16V AC and 24V AC, and a 10VA
transformer.
August 2019

We are here for you.
Visit www.arlo.com/support for quick answers and resources:
• How-to videos
• Troubleshooting tips
• The Arlo Support phone number for your location
Release pin
Wall screws and anchors
Doorbell and plate
(These parts are attached to
each other)
Angled
mounting plate
• A Phillips head screwdriver is required to install the doorbell
(not provided).
• You may also benet from having a drill, a level, and a ladder
(to reach the chime).
Tools
Power kit
What’s in the box
Need help?
Optional wire extensions, wire fasteners,
and extra screws