Armor 99 USB Series User manual
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
info@armorheadsets.com
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
14
3
2Armor 99 USB Series User Manual
WWW.ARMORHEADSETS.COM
Using both thumbs, remove the
ear cushion by gently prying the
earplate away from the groove
on the receiver
Your new headset includes a
clothing clip to ensure the cable
does not get caught or
inadvertently pulled. The clothing
clip should be fastenlevel,
ensuring that there is sufficient
slack on the cable to allow free
movement of your head without
disturbing the headset position.
Ear Cushion Removal
Clothing Clip Maintenance
Accessories
The ear cushions can be removed
for cleaning or replacement
Leatherette Ear Cushion/s
Spare Foam Ear Cushion/s
Clothing clip
USB Female Type A to Male Type C Adapter
Soft Carrying Case
Replacements & Enhancements:
1.
2.
3.
4.
5.
Safety
For your own safety, this product should only be used with CE and RoHS approved equipment.
Using this headset with non approved equipment can void this product warranty.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Armor 99 USB Series
Wideband Speaker
Ear Cushion
Adjustable Headband
Soft Headband Pad
T bar
Ultra Noise Cancelling Microphone
Secondary Microphone
USB Controller
Flexible Boom Arm
Type A Connector
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Headset Components
Works with any PC & Softphone.
Compatible with Skype For Business & Microsoft Teams*,
Avaya, Cisco system and 3CX.
* Supports On/Off Key Hook Function
Compatibility
Connect your Armor 99 USB Series Headset to a free USB port on
your PC.
Make sure that the headset has been selected as the standard
audio device in the system control audio settings.
Check whether you need to adjust these settings to use a headset
by reading the operating instructions for your softphone
application.
Connection
Visual Light Up Display to Mute Microphone
Volume Control
On/Off Hook Key Function for Teams Version
1.
2.
3.
Headset Components
Using Your Headset
Connect your 99 USB Series
Headset to a free USB port on
your PC. There is a USB Type
C adapter included if needed.
Wearing Your Headset
The headset can be worn on
either the right or left side by
rotating the microphone
boom over the headband to
accommodate your
preference
How to Wear the Headset
Mic Positioning
Place the headset receiver to your
ear(s), if using a single ear headset
you should set the T-bar above the
other ear. Adjust the headband until
it is comfortable, ideally ensuring that
there is virtually no pressure felt on the
ear(s).
To avoid low or distorted sound,
and to provide clear and crisp
telephone calls, the microphone
should be positioned within an
inch or two (30-40mm) from the
corner of your mouth. The
microphone boom arm is
flexible and will move in a
variety of directions to ensure
the best fit.
876
2 3 4 5
Industry Canada Regulatory Information
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Armor Headsets Inc.
http://www.armorheadset
Tel: (888) 880-3088
300o
1
2
Adjustable Headband
3
4
8
5
7
6Ultra noise
cancelling microphone
1
2
3
5
Soft Padded Headband
_______________
9
Wideband Speaker
Flexible boom arm
Secondary Microphone
Table of contents
Other Armor Headset manuals
